Are Ventilated Seat Cushions Actually Useful?

1 Answers
McAdeline
07/30/25 2:05am
Ventilated seat cushions are useful. Below is relevant information about ventilation: Seat Ventilation: Seat ventilation is the "summer cooling device" of car seat air conditioning. Although automatic air conditioning can maintain a constant temperature inside the car during summer, the close contact between the passenger's body and the seat restricts airflow in the contact area, making it difficult for sweat to evaporate and causing discomfort. The unique ventilation circulation system of seat ventilation continuously delivers fresh air through small holes in the seat cushion and backrest, preventing sweat buildup on the buttocks and back, and providing a comfortable riding environment. This effectively improves the airflow between the human body and the seat surface, ensuring dryness and comfort even during long rides. Introduction: Seat ventilation comes in two types: air-supply and air-suction. The principle of seat ventilation involves using fans to inject air into the seat, which then flows out through small holes on the seat surface to achieve ventilation. Seat ventilation effectively enhances the airflow environment between the human body and the seat surface, ensuring dryness and comfort even during extended periods of sitting.
Was this review help?
13
5
Share
More Forum Discussions

Where is the Kicks' cabin air filter located?

The Kicks' cabin air filter is located beneath the glove box. To replace the cabin air filter, you need to remove the glove box. Here is a step-by-step guide for replacing the Kicks' cabin air filter: 1. The glove box is usually secured by clips or nuts, so first remove the glove box before replacement; 2. Unscrew the nuts and forcefully detach the upper part of the glove box to reveal the exterior of the cabin air filter; 3. Open the housing, replace the cabin air filter, and reinstall the housing. Then reassemble the glove box in the reverse order of removal. There are several precautions to note when replacing the cabin air filter: 1. Use a cabin air filter produced by a reputable manufacturer, and compare the appearance and dimensions when purchasing to avoid incompatibility; 2. Always turn off the car engine before replacing the cabin air filter; 3. When unscrewing bolts and removing clips, be sure to control the appropriate force to avoid damaging components; 4. Pay attention to the installation orientation of the filter to avoid installing it backward; 5. After installation, check if the filter is correctly installed—the filtering surface must cover the entire air duct with a tight seal around it. Otherwise, the filtration efficiency will be significantly compromised.
4
1
Share

How often should the brake pads on a Ford New Mondeo be replaced?

Ford Mondeo brake pads should be replaced every 60,000 to 70,000 kilometers. The replacement method is as follows: 1. Before replacing the brake pads, open the cover of the brake fluid reservoir in the engine compartment to check the brake fluid level. If the brake fluid level is above the maximum limit, some should be removed to prevent overflow during replacement; 2. Prepare the new brake pads for replacement and remove the wheel where the brake is located. Be careful to avoid scratching the rim during removal; 3. Use a wrench and socket to remove the bolts of the brake caliper, then take out the brake pads (if there is a brake sensor line, remove it first). Check if the brake pads are excessively worn or have cracks. If so, proceed with the next steps of replacement; 4. Since the brake caliper may have a lot of sand or dirt, clean it thoroughly with a cloth and apply anti-squeal paste to prevent noise during braking; 5. Use a piston press to push the piston to its limit, then install the new brake pads onto the caliper. After the new brake pads are properly installed (including the brake sensor line if present), tighten the guide bolts to complete the installation; 6. After installation, cover the reservoir cap, get into the car, and press the brake pedal several times to reset the brake. Then check the brake fluid level to ensure it is within the appropriate range; 7. After replacement, test drive the car to check if the braking effect is achieved.
5
5
Share

Which transmission is used in the Atenza?

The manufacturer of the Atenza's transmission is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the world's highest market share. The Atenza uses a 6-speed automatic transmission with manual mode. This transmission has eight forward gears. Essentially, a manual-automatic transmission is a traditional AT or CVT transmission with added manual shifting functionality. When using the Atenza's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While many experienced drivers coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating and create a noticeable jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into the opposite gear prematurely to demonstrate "smooth" operation, but this severely damages transmission gears and may eventually cause gear grinding failures. Avoid frequent steep hill climbs in Drive (D). Automatic vehicles often overheat under heavy load during steep ascents or may upshift prematurely, causing insufficient climbing power. Use manual mode to maintain lower gears or engage sport mode to protect the transmission. Do not tow long distances. When an automatic vehicle breaks down, use a flatbed tow truck with the transmission in Neutral (N). Never tow directly with ropes or other vehicles.
18
0
Share

What is a car composed of?

A car is generally composed of four basic parts: the engine, chassis, body, and electrical equipment. A car is primarily a non-track, non-catenary vehicle that relies on its own power for propulsion and has four or more wheels. Car Engine: The engine is the power unit of a car. It consists of the engine block, crankshaft and connecting rod mechanism, valve train, cooling system, lubrication system, fuel system, and ignition system (diesel engines do not have an ignition system). Engines can be categorized by fuel type into gasoline and diesel engines, and by working method into two-stroke and four-stroke engines, with most engines being four-stroke. Car Chassis: The chassis serves to support and mount the car engine and its various components and assemblies, forming the overall shape of the car. It receives power from the engine to enable movement and ensure normal operation. The chassis consists of four parts: the transmission system, running gear, steering system, and braking system. Car Body: The body is mounted on the frame of the chassis and is used to accommodate the driver, passengers, or cargo. The bodies of sedans and buses are usually of a unitary structure, while truck bodies typically consist of a cab and a cargo compartment. The main functions of the car body are to protect the driver and create a good aerodynamic environment. A well-designed body not only enhances performance but also reflects the owner's personality. In terms of structure, car bodies are mainly divided into body-on-frame and unibody types. Car Electrical Equipment: This mainly includes the battery, generator, voltage regulator, starter, ignition system, instruments, lighting devices, audio equipment, windshield wipers, etc.
5
2
Share

Will Insurance Cover a Car Crushed by a Falling Tree?

Here are the specific scenarios regarding a car being crushed by a falling tree: 1. If the tree breaks and damages the vehicle due to force majeure: vehicles with insurance will be compensated by the insurance company; those without insurance or outside the coverage scope will be the owner's responsibility. 2. If caused by tree breakage: according to Article 90 of the Tort Liability Law of the People's Republic of China, the owner or manager of the tree shall bear tort liability unless they can prove they are not at fault. 3. If caused by maintenance or management negligence: the manager of the tree shall compensate for the damage, with the owner bearing joint liability. If the vehicle owner is at fault, they shall also bear corresponding responsibility.
19
3
Share

Should Motorcycles Be Equipped with Dash Cams?

It is advisable to install a dash cam on a motorcycle for enhanced safety. Dash Cam: The working principle of a car dash cam is to digitally record and cyclically update the road conditions in front of, inside, and around the vehicle. The recorded data includes in-car audio, vehicle acceleration, steering, and braking, which can be used to determine liability in traffic accidents. Functions of a Dash Cam: To protect the legitimate rights and interests of drivers. In case of accidental collisions with pedestrians crossing the road or cyclists and motorcyclists, drivers may face extortion. A dash cam can provide drivers with valid evidence to support their case.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.