Are Tires Afraid of Sun Exposure?

2 Answers
Jayla
08/30/25 5:33am
If tires are exposed to intense sunlight, it may lead to a blowout. Here is some relevant information about tires: 1. Characteristics: The main material of tires, rubber, is prone to changes in condition due to variations in the external environment. This characteristic means that tires not only have a limited lifespan but also require special care during daily use. In summer, it is advisable to park the car in a place without prolonged exposure to sunlight. Long-term exposure to ultraviolet rays can cause the rubber surface of the tires to age, increasing the likelihood of a blowout. 2. Precautions: When parking, ensure that all four tires are on the same level ground. Avoid parking on uneven surfaces where one side is higher than the other. Otherwise, the tire at the lowest point will bear excessive pressure, leading to deformation of the internal steel wires and potential tire damage.
Was this review help?
12
0
Share
LeLola
09/12/25 2:41am
Are tires afraid of exposure to sunlight? Personally, I think they are. My own car was parked outside in the summer and exposed to the sun several times, after which fine cracks appeared on the tread. Later, I consulted an expert and learned that this was caused by UV damage. Tires are made of rubber, and prolonged exposure to sunlight can cause the rubber to age and become brittle. High temperatures can also increase tire pressure, raising the risk of a blowout, especially during long-distance driving. I recommend parking in the shade or under a carport whenever possible. If there's no shade, you can use a car cover to protect the tires and extend their lifespan. Additionally, it's important to regularly check the condition of your tires, such as looking for cracks or bulges, and not neglect this for the sake of convenience. After all, safety comes first, and developing good habits can save you a lot of money on tire replacements each year. In short, prolonged sun exposure is not good for tires, and taking a few extra steps in daily maintenance can make them last longer.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What to Do If the Vehicle Fails the Environmental Inspection?

If a car fails the annual environmental inspection, the main solutions are: 1. Check the catalytic converter and oxygen sensor. If the engine's air-fuel mixture does not burn completely, a large amount of carbon deposits will form. These deposits will be emitted through the exhaust pipe and adhere to the inside of the catalytic converter and the surface of the oxygen sensor. Therefore, cleaning the catalytic converter and oxygen sensor can solve many issues related to unqualified vehicle emissions. 2. Clean or replace the spark plugs. Faults in the ignition system, such as spark plugs or ignition coils, can also cause excessive vehicle emissions. Spark plugs are wear-prone parts and are most likely to develop issues. Poor spark plug conditions can worsen emission pollution. Spark plugs are also prone to carbon buildup, which can be cleaned with sandpaper or cleaning agents to restore their activity, and the ignition gap can be adjusted. 3. Perform a deep engine cleaning. Cleaning the throttle body, fuel system, intake manifold, fuel injectors, etc., and removing carbon deposits inside the engine can significantly improve the engine's condition. This will help avoid the problem of increased emission pollution caused by incomplete combustion of the air-fuel mixture under poor engine conditions.
16
3
Share

Where are the car brake pads located?

The car's brake pads are located in the four wheel hubs of the car. During daily driving, it is important to pay attention to: 1. Regular maintenance, especially before driving on highways. Always check if the brake pads are in good condition to ensure safety. 2. Avoid sudden braking, as frequent sudden braking will accelerate the wear of the brake pads. 3. Avoid water immersion to prevent corrosion of the brake pads. Extended content: 1. Brake pads are the most important component in a car's braking system. They are generally composed of a steel plate, friction blocks, and a heat insulation layer. They generate friction by pressing against the brake disc during braking to achieve deceleration. 2. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation. The friction blocks consist of friction materials and adhesives. Due to friction, the friction blocks will gradually wear out. Generally, the lower the cost of the brake pads, the faster they wear out. Once the friction material is used up, the brake pads should be replaced promptly. Otherwise, the steel plate will come into direct contact with the brake disc, eventually leading to loss of braking effectiveness and damage to the brake disc.
8
4
Share

How to Defog the New Corolla?

The new Corolla models with automatic air conditioning have a dedicated defogging button—simply press it to activate the function. For models with manual air conditioning, turn the air direction control knob to the defrost/defog mode, adjust the air vents to direct airflow toward the windshield, and then set the fan speed and temperature as needed. Below is a detailed introduction to the new Corolla: 1. **Exterior Design**: The new Corolla features a more aggressive styling compared to the current model, catering to the aesthetic preferences of younger consumers. The front fascia adopts a honeycomb grille design, exuding a sporty vibe. The emblem seamlessly integrates with the side grilles in a continuous design, enhancing both refinement and a cohesive front-end appearance for a sharp visual impact. 2. **Interior**: The sedan version of the new Corolla is expected to mirror the hatchback's interior, equipped with a three-spoke steering wheel and a digital instrument cluster for a high-tech feel. The dashboard boasts a well-layered layout, featuring a trendy floating touchscreen that stands out prominently and supports navigation. Below the screen, rotary knobs for climate controls ensure driver-friendly operation. 3. **Features**: The new Corolla comes with the latest Smart Connect and Safety Sense systems, including popular functions like Apple CarPlay and Entune 3.0 audio. Safety is a key focus, with the Toyota Safety Sense suite offering lane-keeping assist, lane departure alert, automatic high beams, and a pre-collision pedestrian detection system.
15
2
Share

What tires should be used for Highlander?

Highlander uses Dunlop tires. The tire size for four-wheel drive models is 235/55R20, while the tire size for two-wheel drive models is 235/65R18. Dunlop is a Japanese tire brand under the Sumitomo Group, primarily engaged in tire manufacturing and the production of sports equipment such as tennis, squash, squash rackets, and golf balls. For daily use of Highlander tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its water drainage and anti-skid functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts during high-speed driving. Additionally, promptly remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this accelerates tire wear. Do not splash water to cool the tires. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure increases. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or emergency braking to prevent accelerated tread wear due to dragging between the tires and the ground.
19
1
Share

Is the Toyota Avalon's engine fully imported?

Toyota Avalon's engine is fully imported. The engine converts the thermal energy of gasoline or diesel into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston and perform work. Taking the 2021 Toyota Avalon as an example, it belongs to the mid-size car category with body dimensions of 4975mm in length, 1850mm in width, and 1450mm in height, a wheelbase of 2870mm, a fuel tank capacity of 60 liters, and a curb weight of 1595kg. The 2021 Toyota Avalon features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 209PS, a maximum power of 154kW, and a maximum torque of 250Nm, paired with an 8-speed automatic transmission.
20
4
Share

What is the method for car paint touch-up?

The method for car paint touch-up is: 1. Use clean water to wash the area where the paint has chipped; 2. Sand the chipped area with sandpaper until it feels smooth to the touch; 3. Cover areas that do not need touch-up with tape; 4. Use a spray paint can that matches the car's color to spray the chipped area. Methods to prevent car paint from chipping: 1. Avoid using hard objects or dry cloths to wipe the paint surface directly—rinse off dust and dirt with water first, then use a clean absorbent cloth to wipe; 2. Avoid prolonged exposure to sunlight when parking; 3. Reduce the frequency of car washes and avoid waxing or polishing; 4. Promptly remove corrosive substances to minimize paint corrosion.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.