Are Tires Afraid of Sun Exposure?

2 Answers
Arianna
07/29/25 4:11pm
Tires are afraid of sun exposure. Tires have rubber seals, and prolonged exposure to the sun can cause these rubber seals to age. If tires are exposed to the sun for a long time, there is a high likelihood of a blowout. Most tires today are of good quality, but it is still important to avoid prolonged sun exposure. Here are some methods to protect your car from sun exposure: 1. Apply window film. Car window film not only provides heat insulation and blocks UV rays but also filters out most visible light, acting like sunglasses to make driving in the scorching sun more comfortable for your body and eyes. 2. Apply paint protection. Under prolonged sun exposure, the car's paint may appear unchanged to the naked eye. Applying a polymer-based paint care product containing UV reflectants can create a protective layer against sun damage.
Was this review help?
9
2
Share
LukasLynn
08/15/25 4:41am
I'm the type who drives to work every day, parking my car in the company's open-air parking lot. In summer, after being exposed to the sun, small cracks and whitening appear on the tire surface. I asked a few car-savvy friends, and they all said that tire rubber is most afraid of long-term UV exposure, which accelerates aging over time, causing the rubber to harden and crack easily, affecting driving safety. I also tried parking in the shade or using a sunshade and found that the tire lifespan was significantly extended. During regular car washes, I casually check the tread; if the wear is severe, I replace them immediately. These small habits not only save money but also avoid the risk of high-speed blowouts, which is quite practical.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

Where is the fuel tank cap switch located?

Different types of vehicles have different fuel tank cap switches. Here is an introduction to the locations of fuel tank switches: 1. In-car switch: The in-car switch is the most commonly used type in private vehicles, located in the same position as the trunk lever. Both are situated under the floor mat on the lower left side of the driver's seat, making operation very convenient. Another type is the button-style switch, located on the center console, marked with a fuel pump icon. 2. Mechanical key switch: The mechanical key switch is the oldest type and is rarely seen in private vehicles nowadays. To open the fuel tank cap, the engine must be turned off, the key removed, and the mechanical key used to unlock it, offering the highest level of security. 3. Push-type switch: The push-type switch is currently the most convenient. The owner only needs to park and turn off the engine without any additional operations, allowing the gas station attendant to press and open the fuel cap themselves.
8
5
Share

How to Handle a Lost Out-of-Town Driver's License?

To apply for a replacement of a lost out-of-town driver's license, you need to prepare the following materials: 1. The original and a copy of the driver's identity document. 2. A written statement declaring the loss of the driver's license. 3. The original receipt of the provincial digital photo collection for the driver's license. Some important notes for replacing a driver's license: 1. After the replacement application is successfully processed, you cannot drive with the original license before receiving the new one. 2. The original driver's license becomes invalid once the new one is issued. 3. A physical condition certificate is required for replacing the driver's license.
12
3
Share

What is the Appropriate Range for Long-Term Fuel Trim?

Generally, it is normal for the long-term fuel trim to be between -23% and +16%, but variations across different vehicle models are also common. About the automotive fuel delivery system: The proper operation of a car's engine relies on the fuel delivery system, which is crucial for the engine. During engine operation, the ECU controls the fuel injection duration of the injectors, thereby regulating the fuel injection volume. The fuel delivery system consists of components such as the fuel pump, fuel injectors, and associated piping. Some direct-injection engines also include a high-pressure fuel pump. Direct-injection engines require significantly higher injection pressure, hence the need for a dedicated high-pressure fuel pump. The high-pressure fuel pump is usually visible when the engine hood is opened, while the fuel pump is located inside the fuel tank. Port fuel injection engines typically have only one fuel pump. Issues with the fuel delivery system can severely impact the engine's normal operation. About vehicle data streams: Specialized diagnostic tools can read the vehicle's data stream, helping to identify problematic components. To access the data stream, an OBD interface is required, which is generally located beneath the steering wheel on the driver's side in most vehicles. Some vehicles may have less accessible OBD interfaces; if difficult to locate, consulting the owner's manual is advisable. During regular vehicle use, ensure the OBD interface does not come into contact with water.
12
5
Share

How to Identify China VI Vehicles?

There will be labels indicating China VI vehicles when purchasing a car. Relevant introduction: 1. Brief introduction: The "China VI" standard adopts the same limit requirements for gasoline and diesel vehicles based on the fuel-neutral principle. 2. Specific content: The total hydrocarbons (THC, also known as hydrocarbons) standard has been raised from 100mg/km to 50mg/km; non-methane hydrocarbons (NMHC, all hydrocarbons except methane) emissions have been reduced from 68mg/km to 35mg/km; nitrogen oxides (NOx) have been reduced from 60mg/km to 30mg/km; particulate matter mass (PM) has been reduced from 4.5mg/km to 3.0mg/km. That is, carbon monoxide emissions, total hydrocarbons, and non-methane total hydrocarbons must be reduced by more than 50% on the original basis.
5
3
Share

What does the KIA logo mean?

KIA's logo is 'KIA', which means 'to rise from Asia and go global'. It can be split into 'KI' and 'A', where 'KI' in Korean means 'to rise', and 'A' is the abbreviation for Asia. The meaning of the KIA logo is as follows: KIA Motors is a Korean car brand, and the logo 'KIA' is also interpreted from Korean. In Korean, 'KI' means 'to rise', and 'A' is the first letter of 'Asia'. The full phrase translates to 'to come up out of Asia to the world', meaning 'to rise from Asia and go global'. After entering the Chinese market, it was naturally called 'KIA' due to its phonetic similarity. The KIA logo embodies a bold and aspirational vision, symbolizing the brand's ambition to start from Asia and expand globally.
14
2
Share

How Many Days to Break in New Brake Pads?

New brake pads require a break-in period of approximately 200 kilometers to achieve optimal braking performance. Here is relevant information about brake pads: 1. Brake pad classification: Asbestos brake pads (mostly phased out), semi-metallic brake pads, low-metallic brake pads, NAO formula brake pads, ceramic brake pads, and NAO ceramic brake pads. 2. Ceramic vs traditional brake pads: In traditional brake pads, metal serves as the primary friction material, providing strong braking force but with greater wear and tendency for noise generation. After installing ceramic brake pads, abnormal squealing (scraping sounds) won't occur during normal driving. Since ceramic brake pads contain no metal components, they eliminate the metallic screeching caused by friction between traditional metal brake pads and their counterparts (brake pads and rotors). 3. Stable friction coefficient: Conventional brake pads use immature friction materials where excessively high friction coefficients may lead to dangerous situations like loss of steering control during braking, pad burning, or rotor scoring. Even when rotor temperatures reach 650°C, ceramic brake pads maintain a stable friction coefficient between 0.45-0.55, ensuring reliable braking performance.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.