Are there traffic violation cameras at intersections without traffic lights?

T-Cross Dimensions

The dimensions of the T-Cross are 4218mm in length, 1760mm in width, and 1599mm in height, as per official data. The length of the T-Cross refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The T-Cross is equipped with two types of engines: a naturally aspirated engine and a turbocharged engine. The naturally aspirated engine delivers a maximum power of 83kW and a maximum torque of 145Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 3900 rpm. The turbocharged engine delivers a maximum power of 110kW and a maximum torque of 250Nm, with the maximum power achieved at 5000 rpm and the maximum torque between 1750-3000 rpm. The naturally aspirated engine is paired with a 6-speed automatic transmission or a 5-speed manual transmission, while the turbocharged engine is paired with a 7-speed dry dual-clutch transmission. National regulations specify vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle excludes side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

10

2

Share

How to Disassemble the BYD S6 Wiper?

Wipers help clear obstacles from the front windshield, ensuring safe driving and require regular replacement. The steps to disassemble the BYD S6 wiper are as follows: 1. First, open the screw cover at the end of the rear wiper, remove the screw, and store it properly. 2. Next, swing the wiper arm in the direction of the engine hood. 3. Then, swing the wiper blade so that it forms a 90° angle with the wiper arm. 4. Finally, locate the clip at the connection point between the wiper blade and the wiper arm. Press the clip to remove the wiper blade.

16

1

Share

What engine does the Golf R Variant use?

The Golf R Variant is equipped with a 2.0-liter four-cylinder turbocharged engine, delivering a maximum horsepower of 280 HP, a peak power output of 206 kW, and a maximum torque of 380 Nm. The engine used in the Golf R Variant is the third-generation EA888 engine, which features a cast iron engine block, offering excellent durability and significant potential for aftermarket modifications. The Golf R Variant is a high-performance station wagon produced by Volkswagen, based on the Golf R platform. As of November 2019, the Golf R Variant has been completely discontinued, and all currently available Golf R models are the standard hatchback versions.

13

5

Share

What car is the Golf R20?

Golf R20 refers to the sixth-generation model of the Golf, which is a hatchback with dimensions of 4263mm in length, 1799mm in width, and 1460mm in height, and a wheelbase of 2578mm. This car is equipped with a high-performance 2.0T turbocharged engine and comes standard with a four-wheel-drive system, enhancing its dynamic performance. In terms of appearance, the Golf R20's design is very similar to that of the Golf GTI, featuring LED fog lights, blackened headlights, and a front grille that differs very little from the Golf GTI model.

3

Share

How to Deal with Overfilled Engine Oil?

Methods for handling overfilled engine oil: 1. Drain some oil from the oil pan's drain port. Wait for the engine temperature to drop before draining to avoid burns. If unsure how to proceed, the owner can visit a 4S shop for professional assistance; 2. Use a syringe with an IV plastic tube to extract the excess oil. The medical plastic tube has measurement marks for easy reference. Normally, the proper oil level should be between the upper and lower limits on the dipstick. A level below the lower limit may result in low oil pressure and potential lubrication issues, but short-term use won't cause severe damage to the engine.

16

0

Share

Does a new timing belt have a break-in period?

New timing belts do have a break-in period, as all components require some initial wear-in. Automakers explicitly specify that the timing drive system should be replaced every 60,000 kilometers. Damage to timing drive system components can cause vehicle breakdowns while driving, and in severe cases, may lead to engine damage. Replacement should not exceed 80,000 kilometers or 3 years to prevent belt aging and breakage. Different vehicle manufacturers have varying maintenance cycles, so the specific replacement interval should follow the automaker's recommendations. Proper engine operation relies on precise timing coordination between components, such as valve opening/closing timing and spark plug ignition timing, which is ensured by the engine's timing system.

15

0

Share

Are there traffic violation cameras at intersections without traffic lights?

T-Cross Dimensions

How to Disassemble the BYD S6 Wiper?

What engine does the Golf R Variant use?

What car is the Golf R20?

How to Deal with Overfilled Engine Oil?

Does a new timing belt have a break-in period?

What is the reason for not hearing the starting sound when the car is ignited?

What does it mean to release the mortgage on the vehicle green title?

Is Cleaning the Three-Way Catalytic Converter Useful?

Which brand does cordial tire belong to?