Are there surveillance cameras in parking lots?

1 Answers
StMax
07/29/25 9:22am
Generally, parking lots have surveillance cameras. Here are some relevant introductions about parking lot management: 1. Parking regulations: Any vehicle entering the parking lot must follow the regulations to swipe the card and pay the fee. 2. Vehicle driving rules: After entering the parking lot, vehicles must follow the directional arrows, prompts, or the instructions of the management staff, and must not drive in the opposite direction. The speed should be limited to below 5 km/h. 3. Prohibited vehicles and behaviors: Any vehicle in poor condition or with oil leakage is not allowed to enter the parking lot; no vehicle is allowed to refuel, repair, or wash in the parking lot.
Was this review help?
3
0
Share
More Forum Discussions

What is the reason when the battery has power but the car won't start?

The reasons why the battery has power but the car won't start: 1. Low voltage; 2. Malfunction in the ignition system or fuel supply system. If the car won't start, it is necessary to check the ignition system and fuel supply system. The main components of a car engine's ignition system include spark plugs and ignition coils. Spark plugs are wearable parts that require regular replacement. Just because the battery has power doesn't mean the car can start, because the starter is a high-power electrical device that demands very high voltage and current from the battery at the moment of operation. In contrast, the voltage and current required by ordinary electrical devices in the car are much smaller. Therefore, when most batteries are undercharged, it's not that they have no power left at all; their voltage and current can only meet the needs of low-power devices in the car but cannot drive the starter.
11
4
Share

How to Adjust the Air Conditioning Temperature on the Tiggo 8?

The method to adjust the air conditioning temperature on the Tiggo 8 is as follows: There is a temperature adjustment knob on the dashboard of the Tiggo 8, with one side marked in red and the other in blue. Turning the knob fully to the red side will produce hot air, while turning it fully to the blue side will produce room-temperature air. To get cold air, you need to press the AC compressor switch to activate the cooling system. The air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. The Tiggo 8 has dimensions of 4700mm in length, 1860mm in width, and 1746mm in height, with a wheelbase of 2710mm. The vehicle's engine delivers a maximum horsepower of 156Ps, a maximum power output of 115kW, and a maximum torque of 230Nm.
8
1
Share

What are the features of the 2018 Geely Vision X6?

Features of the 2018 Geely Vision X6: 1. Equipped with electric adjustment for the driver's seat, cruise control, one-key start, smartphone connectivity, and electric folding rearview mirrors. 2. Also includes an electronic parking brake, hill descent control, and electronic stability system. Higher trim models come with a panoramic sunroof, which is generally available in mid-to-high trims, providing a sense of openness. Additional information: The Vision X6 utilizes Bosch's 77GHz mid-range forward-looking radar, allowing the vehicle to cruise at the set speed. When the speed of the vehicle ahead is lower than the set cruising speed, the car will automatically adjust its speed to follow the leading vehicle, enabling intelligent following, stopping, and resuming. This offers a relaxed and comfortable driving experience, effectively reducing driver fatigue, enhancing convenience, and improving driving comfort, while also delivering fuel-efficient performance.
5
5
Share

What's the Difference Between Base and High-End Car Models?

The core performance of base and high-end car models is essentially the same. The differences often lie in peripheral features and decorative elements. The main distinctions in the dashboard include audio systems, CD players, decorative trims, air conditioning controls, etc. Below are the specific differences: 1. High-end models typically come with features like LCD panels, automatic air conditioning, navigation systems, automatic transmissions, leather seats, sunroofs, seat heating, power-adjustable seats, higher horsepower, and larger tire sizes. 2. Base models usually have manual air conditioning controls, no LCD panels, no navigation, manual transmissions, standard fabric seats, no sunroof, no seat heating, manual seat adjustments, and are equipped with economical configurations such as smaller displacement engines and lower horsepower. Due to features like LCD panels and automatic air conditioning, the dashboard of high-end models is generally more aesthetically pleasing than that of base models.
20
3
Share

What is the reason for the 2019 Lingpai car lock without sound?

The reason is that the alert sound is turned off in the vehicle settings. Below is the relevant information: 1. Check if it is set to silent mode. 2. Some remote controls have a pattern with a slash on the speaker. Check if this button is pressed. When this button is pressed, only the headlights will light up when locking the car, and no beep sound will be emitted. 3. If there is no pattern in the second case, it means the remote lock is broken, and replacing it with a regular remote lock will suffice. Additional information: The Honda Lingpai can be set to have a lock sound through the vehicle computer. If the Honda Lingpai does not have a sound when locking or you want to set it to silent, you can switch between the two modes by pressing the unlock and lock buttons on the remote control simultaneously for more than three seconds.
12
2
Share

How to Install the License Plate?

License plate installation method is as follows: 1. First install the rivet nut onto the riveting tool by screwing it clockwise until the head of the riveting tool is exposed. Do not overtighten; 2. Use the riveting tool to secure the rivet nut to the car's bumper. Align it with the two holes on the bumper, insert it, hold both handles of the riveting tool, press firmly towards the center, then remove the tool; 3. Take out the license plate fastener and assemble it by placing the fastener core into the outer fastener, then threading the screw through the center; 4. Use a cross-head screwdriver to fix the license plate fastener to the four holes on the license plate, securing the plate to the bumper.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.