Are There Subsidies for Purchasing New Energy Vehicles?

1 Answers
VonEzra
07/24/25 5:41pm
Eligible new energy vehicles receive a subsidy of 3,000 yuan per kilowatt-hour, with a maximum subsidy of 50,000 yuan per vehicle for hybrid passenger cars; pure electric passenger cars can receive a maximum subsidy of 60,000 yuan per vehicle. Here is more information about new energy vehicle subsidies: 1. Subsidy Standards: Range is a key criterion; models with low range will have subsidies completely canceled. New energy vehicles with a range below 150 kilometers are not eligible for subsidies. 2. Brief Description: New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving systems, resulting in vehicles with advanced technical principles, new technologies, and innovative structures.
Was this review help?
1
0
Share
More Forum Discussions

How to Adjust the Height of a Car Headrest?

Sit in the car and lean back slightly to find a comfortable seating position. Use the adjustment button to align the softest part of the car headrest with the back of your head, ensuring it is at the same height. Typically, the adjustment button is located next to the two support rods of the headrest or on the side of the headrest. Press and hold the button to adjust the height up or down.
3
0
Share

How to adjust the height of the driver's seat?

There is no uniform pattern or standard for adjusting the driver's seat; it should be based on individual body proportions. Ensure there is a distance of 1-2 fists between the top of your head and the roof, and that your eye level is positioned slightly above the center of the vertical distance of the front windshield. The adjustable angle switches available will vary depending on the configuration level of your vehicle model.
9
3
Share

What is the penalty for losing a license plate sealing cap?

Losing a sealing cap on the license plate will not result in a fine, but will incur a warning penalty. The vehicle owner is required to apply for a replacement at the vehicle management office within 10 working days and use the special sealing device for license plates. If caught again after 10 working days following the warning, it will be treated as failure to install the vehicle license plate as required, resulting in a fine and 12 demerit points.
11
3
Share

What is the procedure for handling a rear-end collision where I am fully at fault?

In the event of a rear-end collision on the road, the driver should immediately stop the vehicle and secure the scene. If the rear-end collision on the road does not result in personal injury, the parties involved may negotiate the compensation for damages on their own. If the collision causes personal injury, the driver should immediately provide assistance to the injured and report the incident to the traffic police on duty or the traffic management department of the public security authorities.
8
2
Share

How to Apply for a New Energy Charging Pile as an Individual?

The car owner must fill out the application registration form for the installation of a private charging pile for new energy electric vehicles. When installing in a residential area, it is necessary to have the form stamped and confirmed by the property management. The electric vehicle manufacturer must confirm on the registration form that they will build the charging pile for the user and stamp it. The applicant should submit the registration form, identity proof, photos of the parking spot environment, and proof of parking space ownership to the local power supply department to apply for electricity installation.
8
5
Share

What to Do When the Mazda 3 Engine Malfunction Light Comes On?

The engine malfunction light may illuminate during a power-on self-test or under other circumstances. The power-on self-test is an indicator that monitors the status of all vehicle sensors before driving. Generally, if the engine is not started after powering on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC indicator light comes on and remains illuminated for an extended period after the vehicle is started, the main causes may include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, or brake light defects. Below is a detailed explanation of each potential issue: Sensor Problems: Sensors include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen levels. If these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine malfunction light. Solution: Seek professional inspection at a repair center promptly to eliminate safety hazards. Maintenance Issues: Poor engine maintenance is the most common cause of the engine malfunction light. Vehicles have specific maintenance cycles. Failure to adhere to these cycles, combined with poor driving habits, can increase the engine's operational burden, eventually causing the light to illuminate. Solution: Follow the maintenance schedule in the vehicle's manual, ensuring timely and comprehensive servicing to prevent non-maintenance-related issues. Fuel Quality Issues: This refers to both fuel and engine oil. Vehicles require specific fuel grades, and engine oil can be semi-synthetic or fully synthetic. Manufacturers typically recommend the appropriate fuel grade and oil type. Long-term use of incorrect specifications can lead to engine wear and trigger the malfunction light. Solution: Always use the recommended fuel grade and engine oil type for your vehicle. Poor Combustion of Air-Fuel Mixture: Faulty spark plugs, fuel pump issues, or clogged fuel lines can cause poor combustion. This leads to engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, triggering the malfunction light. Intake Issues: Engine combustion requires proper airflow, making the air filter crucial. A dirty or uncleaned air filter can obstruct airflow, potentially leading to blockages and eventually causing the engine light to illuminate. Solution: Regularly clean or replace the air filter to ensure proper intake system operation. Turbocharger Problems: Issues with the intake boost system or turbocharger can trigger the engine light. Common problems include turbocharger failure, accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black exhaust smoke. Solution: Visit a 4S shop for inspection and replacement. Repairs are often not cost-effective, so replacement is usually recommended. Exhaust System Issues: Faults in the rear oxygen sensor, catalytic converter, or exhaust camshaft and bearings can trigger the light. The catalytic converter is particularly prone to damage from impacts or fuel system issues. Solution: Use lead- or silicon-based lubricants for maintenance and cleaning of the catalytic converter. Anti-Theft System: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the engine may not operate properly, and the malfunction light will illuminate. Solution: Professional diagnosis and repair are required, as this issue cannot be fixed independently. Engine Misfire: This occurs when one or more cylinders fail to function properly, leading to symptoms like power loss, difficulty starting, or unstable idling. Solution: Identify and replace faulty cylinder components. If internal mechanical damage is present, major repairs at a professional shop may be necessary.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.