Are there speed requirements for Subject 3?

2 Answers
RubyMarie
07/24/25 10:07pm
Subject 3 speed requirements are: start in 1st gear, apply slight throttle, and shift to 2nd gear regardless of speed (some locations require shifting to 2nd gear within 8 seconds, and Subject 3 requires driving in 2nd gear throughout). During gear shifting operations, when the speed reaches 20-25 km/h with throttle, shift to 3rd gear, and when above 30 km/h, shift to 4th gear. Different items in the Subject 3 test have varying speed requirements, but generally, the speed should be maintained above 30 km/h. The time and distance driven in 1st and 2nd gears should not be too long. Start in 1st gear, complete the start smoothly, then accelerate to 2nd gear, then to 3rd gear, maintaining a speed of 25 to 30 km/h in 3rd gear. For straight-line driving, there is no speed limit, but the speed should be above 30 km/h. If the speed is between 31 km/h and 40 km/h, use 3rd gear. If the speed exceeds 40 km/h, 4th gear must be used. When passing through crosswalks, intersections, bus stops, and school zones, there are speed limit requirements. Regardless of gear or speed, deceleration must be achieved by lightly tapping the brakes, keeping the speed below 30 km/h. If necessary, stop to yield. During lane changes, the speed must not drop below 30 km/h. During overtaking, there must be an acceleration process, with the speed not dropping below 35 km/h. When making a U-turn, generally as you approach the U-turn point, reduce the speed to below 20 km/h in advance, shift to 2nd gear, and then make the U-turn.
Was this review help?
19
4
Share
VanJesse
08/10/25 2:53pm
Just got my driver's license, sharing some experience. There are indeed strict speed requirements for Subject 3, no random speeding up or slowing down; for example, on straight driving sections, you're usually required to maintain between 30 to 40 kilometers per hour—too fast and you'll be penalized for speeding, too slow and you might be marked for unstable driving. Pay extra attention when turning, the speed shouldn't exceed 20km/h to prevent losing control. During my test, I lost quite a few points for accelerating too quickly once, but thankfully adjusted in time. Safety is quite important—too fast and accidents are more likely, too slow and you disrupt traffic—it's all about vehicle control. Practice adapting to road conditions more, like handling slopes or intersections at low speeds, and you'll pass smoothly. Remember to listen to the examiner's speed range prompts, forming this habit makes daily driving steadier too. Lastly, keep a calm mindset, don't get overly nervous leading to big speed fluctuations.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How long after a fresh paint job can the car be exposed to water?

Freshly painted car surfaces can generally be exposed to water after 24 hours. Below are specific maintenance tips for car paint: Waxing: Waxing forms a protective layer on the car's surface, isolating the paint from external elements to prevent oxidation and fading. New cars don't require waxing within the first 3 months of purchase, and excessive waxing afterwards can damage the paint—limit waxing to once every two months at most. Apply wax evenly and maintain consistent direction during application. Crystal Coating: Crystal coating creates a robust fiber network on the paint surface, filling microscopic pores invisible to the naked eye, achieving a mirror-like finish. It adds a thin diamond-hard shell over the paint, enhancing the hardness beyond traditional coatings to protect the paint from damage.
2
5
Share

Why can't I find my newly licensed car on the 12123 app?

Here are the reasons why a newly licensed car cannot be found on the 12123 app: System data not updated: It may be that the data from the traffic police department's system has not been synchronized to the 12123 app's system yet. You need to wait for the system data to complete synchronization before you can view it. Normally, the data entry process takes about 10 days. Incorrect issuance address: It's possible that the correct license issuance address was not selected during registration, which may cause some data to not display or be delayed. You need to select license transfer within the app and transfer it to the license issuance address to display the information.
7
4
Share

Can I rent a car to drive with a newly obtained driver's license?

You can rent a car to drive with a newly obtained driver's license. Here are some precautions for new drivers: Highway driving requires accompaniment: You cannot drive on highways alone during the probationary period. If a driver operates a motor vehicle on a highway during the probationary period, they must be accompanied by a driver who has held a driver's license for the corresponding or higher vehicle category for more than three years. Display probationary sign: It is mandatory to display a probationary sign while driving during the probationary period. If you borrow or rent a car during this period, you must also affix the probationary sign as required; otherwise, you are not allowed to drive. Accumulating 12 penalty points: Accumulating 12 penalty points requires retaking the test. If you accumulate 12 penalty points during the probationary period, your driver's license will be revoked, and you will need to re-register and retake all tests from the beginning, including subject one (theory), subject two (basic skills), and subject three (road test).
6
5
Share

Can a newly tinted car be exposed to direct sunlight?

Can a newly tinted car be exposed to direct sunlight? The answer is yes. Here are the specific functions of car window tinting: Good privacy protection: Generally, car window films are one-way, which can protect the owner's privacy, but the owner needs to verify when choosing the car window film. Anti-explosion effect: In case of an accident, the glass with car window film will stick together after breaking, avoiding the splashing of broken glass, which is a protection for passengers. Thermal insulation: High-quality car window films can provide thermal insulation when used. In summer, they can effectively control the rise of temperature inside the car, and in winter, they can suppress the dissipation of heat inside the car, maintaining the temperature inside and creating a comfortable driving environment for the owner.
13
2
Share

What are the main components of an automotive air conditioning system?

An automotive air conditioning system is primarily composed of a refrigeration system, heating system, air delivery system, control system, and air purification system. The refrigeration system mainly consists of an evaporator, air conditioning compressor, condenser, liquid storage tank, expansion valve, and high/low pressure pipelines. The heating system primarily includes a heater core, water valve, and blower. The functions of an automotive air conditioning system are: 1. The air conditioner can regulate the temperature inside the cabin, both heating and cooling the air to maintain a comfortable level; 2. The air conditioner can remove moisture from the air, drying it to absorb human sweat and create a more comfortable environment; 3. The air conditioner can intake fresh air, providing ventilation functionality.
5
3
Share

How many liters of engine oil does the Passat need?

The Passat requires 4.5 liters of engine oil. When adding oil, base it on the actual situation and add it in multiple small increments to avoid engine damage from overfilling. Engine oils are classified into various grades, including mineral oil, synthetic oil, and full synthetic oil, so their shelf lives vary, typically ranging from 3 to 5 years. The Passat is a mid-size sedan under SAIC Volkswagen, featuring a MacPherson strut front suspension and a multi-link rear suspension. In terms of dimensions, it measures 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm. It is powered by a 1.4T turbocharged engine paired with a 7-speed dual-clutch transmission.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.