Are there shared cars in Chengdu?

2 Answers
LaQuinn
07/28/25 11:10pm
Chengdu has shared cars. The following precautions should be taken when using shared cars: Check the car for damage: When using a shared car, first inspect the interior and exterior for any damage. If damage is found, it should be reported immediately or photographed with a mobile phone. The trunk of the shared car may contain various small tools, such as fire extinguishers and warning triangles, which might be needed during driving. Check the car tires: Since it's a shared car, many drivers may not be very careful, leading to severe tire wear. It's essential to check the tires before getting in the car. Inspect the tire wear and the car's tire pressure. If any abnormalities are found, it's better to switch to another car. This check should be done before getting in the car to avoid any safety issues due to tire problems.
Was this review help?
6
1
Share
SanSienna
08/12/25 3:34am
Well, I just tried car-sharing services in downtown Chengdu, and there are quite a few options available. Common brands include GoFun and EVCARD, and the process is very simple. You just need to download the app, register, upload your driver's license and ID information, and then scan the QR code to unlock the car. The cost varies depending on the car model, usually around 20 to 30 yuan per hour, or about 100 yuan for a full-day rental. The deposit ranges from 500 to 1000 yuan and is refunded quickly after use. The service covers a wide area, including popular downtown spots like Chunxi Road and Tianfu Square, with dedicated parking spaces near subway stations, making it very convenient for travel. However, I noticed that during weekends or holidays, the demand is high, and cars in the app are often fully booked. It's advisable to make a reservation in advance or avoid peak hours. Overall, car-sharing is quite popular in Chengdu, especially for temporary transportation needs, and it’s a great way to save money and avoid the hassle of hailing a taxi.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

How often should the spark plugs of an Audi Q5 be replaced?

Audi Q5 spark plug replacement cycle: Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is advisable to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode to produce a spark, thereby igniting the air-fuel mixture in the cylinder.
18
2
Share

How to Replace the Battery in an Envision Car Key?

To replace the battery in an Envision car key, follow these steps: 1. Press the button on the transmitter to pull out the key; 2. Use a flat tool to insert into the bottom of the transmitter and separate it into two halves; 3. Press the battery and slide it toward the bottom of the transmitter to remove the old battery; 4. Insert the new battery with the positive side facing the back cover; 5. Press the battery down until it is secured in the correct position; 6. Reattach the battery cover to the transmitter. Additional relevant information is as follows: 1. The Envision is a mid-size SUV under the Buick brand, with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, and a wheelbase of 2750mm. 2. The Envision features a MacPherson strut independent front suspension and a multi-link independent rear suspension, with a front-wheel-drive system.
4
0
Share

How to Ensure Safety When Driving on Mountain Roads?

The following are precautions to take when driving on mountain roads: 1. Avoid overtaking when possible: Mountain roads are often narrow with many curves, and the outer lane may border cliffs or steep slopes, making overtaking risky. If overtaking is unavoidable, do not attempt it on curves; choose straight sections instead and carefully observe the road conditions ahead and behind. 2. Select the appropriate gear for uphill driving: For manual transmission vehicles, use a low to medium gear (2nd or 3rd gear) when climbing hills. This utilizes the engine's high torque output to ensure sufficient power and avoids mid-hill gear changes that could disrupt smooth power delivery. 3. Pay attention to road signs while driving and slow down accordingly. Before entering a curve, honk your horn to alert any oncoming vehicles.
3
1
Share

How to Replace the Battery in a BMW 7 Series Key?

Here is the method to replace the battery in a BMW 7 Series key: 1. Remove the mechanical key. You will see two holes—one for the mechanical key and the other for removing the key cover. 2. Insert the mechanical key into the hole for removing the key cover and gently pry it open using the lever principle to access the battery compartment. 3. Use a toothpick to remove the old battery and insert a new one. 4. Place the battery back into the car remote key in the reverse order of removal. Additional notes: When replacing the battery, remember to check for signs of corrosion in the battery and battery compartment. Sometimes, dead batteries may crack or leak corrosive chemicals. If you notice signs of corrosion, carefully clean the battery compartment before installing the new battery. If your remote stops working, it might be due to battery damage.
3
1
Share

What Causes Excessive Tire Pressure?

The reasons for excessive tire pressure include: over-inflation of the tire leading to high pressure; hot weather causing gas expansion and increased pressure; prolonged driving generating heat through friction, raising the pressure; and aging or worn suspension components related to the wheels, resulting in misalignment, uneven wear, higher temperature, and increased tire pressure. Hazards of excessive tire pressure: Reduced friction and adhesion of the tire, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern, shortening tire lifespan. Increased vehicle vibration, indirectly affecting the lifespan of other components; excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; decreased puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts due to impact, leading to a tire burst.
9
1
Share

What is the difference between the Kodiaq and the Kodiaq GT?

The differences between the Kodiaq and the Kodiaq GT are as follows: 1. The front fascia of the Kodiaq and the Kodiaq GT does not have significant differences, with the design being largely consistent. The rear part of the body, however, features two distinct styles. From the side view, the Kodiaq has a square and rugged profile, embodying a traditional SUV shape. In contrast, the Kodiaq GT adopts a fastback design, presenting a typical coupe style. While the rear design is roughly similar, the Kodiaq GT has a more pronounced rear window slope. 2. The interior dashboard design of both models is largely similar. The most notable difference lies in the seats. The Kodiaq uses conventional seats, whereas the Kodiaq GT is equipped with integrated sport seats, which offer significantly better support and body-hugging fit compared to standard seats.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.