Are There No Street Lights on Highways?

1 Answers
LaAmelia
07/23/25 11:34pm
Highways generally do not have street lights installed except for important bridge surfaces and tunnels. When driving on highways, it is necessary to use vehicle lights properly to ensure driving safety. During normal driving, turn on the night lights and width indicator lights. If there are no vehicles ahead, you can appropriately turn on the high beams to observe the road conditions. Precautions for driving on highways at night: 1. Familiarize yourself with various indicator lights on the vehicle: When driving at night, you need to understand the car's lights and pay attention to their positions, including which lights to use in different environments. Use light changes to alert vehicles in front and behind to avoid traffic accidents on the highway. 2. No speeding: Driving speeds on highways are already relatively fast, and with obstructed vision at night, the safety risks are higher, making traffic accidents more likely. 3. Maintain a safe following distance: Due to the high speeds on highways, drivers need to control the distance and keep a safe gap. Rear-end collisions are a common type of traffic accident on highways, mainly caused by poor distance control. 4. Stay away from large trucks: There are many large trucks on highways. When encountering them, avoid driving side by side with large trucks.
Was this review help?
15
3
Share
More Forum Discussions

What Are the Three Guarantees When Buying a Car?

Three guarantees refer to guarantee for repair, replacement, and refund. 1. Guarantee for repair: During the 'three guarantees' period, any malfunction caused by the quality of the car product will be repaired free of charge after technical appraisal by the 'Technical Service Center' or 'Authorized Maintenance Station'. 2. Guarantee for replacement: During the 'three guarantees' period, if there is a quality issue that cannot be repaired, after appraisal by the 'Center' or 'Authorized Station', qualified parts or assemblies can be replaced free of charge. 3. Guarantee for refund: During the 'three guarantees' period, if a major quality issue occurs and the product still fails to meet the main technical performance indicators after the first two treatments, the user may submit a written request for a refund. After appraisal and confirmation by the 'Center', the dealer can process the car return after collecting depreciation fees based on the usage time and mileage.
20
1
Share

Should You Press the Clutch When Parking and Turning Off the Car?

For manual transmission cars, it is necessary to press the clutch when parking to avoid excessive load on the transmission components, which could cause damage. Below is a detailed introduction about the car clutch: 1. Overview: The car clutch is located inside the flywheel housing between the engine and the transmission. The output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Principle: The driving and driven parts of the clutch transmit torque through friction between contact surfaces, using liquid as a transmission medium, or magnetic transmission (electromagnetic clutch). This allows temporary separation and gradual engagement between the two parts, while permitting mutual rotation during the transmission process.
5
2
Share

Does changing from 18-inch to 19-inch rims have any impact?

Changing from 18-inch to 19-inch rims may reduce the comfort of the vehicle and even cause wear and tear. Below is a detailed introduction about car rims: 1. Overview: The rim (Car-Rim) is the central part of the wheel where the axle is installed, also known as the "wheel rim" or "steel rim." Rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode or deform, posing safety hazards. 2. Classification: Rims can be divided into steel rims and alloy rims based on material, each with its own advantages and disadvantages. The main advantage of steel rims is their simple manufacturing process (usually produced through casting, whereas aluminum alloy rims are typically made using low-pressure casting), relatively low cost, and strong resistance to metal fatigue.
19
1
Share

How to Distinguish Between Challenger and Hellcat?

Dodge Challenger and Hellcat can be distinguished as follows: 1. Different exterior dimensions: The length*width*height (mm) of the Dodge Challenger is 5022*1924*1450; The length*width*height (mm) of the Dodge Challenger SRT8 (Hellcat) is 5017*1923*1448. 2. Different engines: The Dodge Challenger is equipped with a 3.6L V6 engine; The Dodge Challenger SRT8 is equipped with a 6.2L V8 engine. 3. Different maximum torque: The maximum torque of the Dodge Challenger is (N・m)368/4800; The maximum torque of the Dodge Challenger SRT8 is (N・m)881/4800.
8
5
Share

What is the speed limit for driving across a narrow bridge?

When a motor vehicle passes through a railway crossing, sharp curve, narrow road, or narrow bridge, the maximum driving speed shall not exceed 30 km/h. Below is relevant information: 1. Speed: When driving on the road, motor vehicles shall not exceed the maximum speed indicated by speed limit signs. On road sections without speed limit signs, a safe speed should be maintained. Driving speed should be reduced when driving at night, on dangerous road sections, or under weather conditions such as sandstorms, hail, rain, snow, fog, or icy roads. 2. Slow down: When passing through an intersection, motor vehicles shall proceed according to traffic signals, signs, markings, or the direction of traffic police; when passing through an intersection without traffic signals, signs, markings, or traffic police direction, they should slow down and yield to pedestrians and vehicles with the right of way.
19
5
Share

Why Are Secondary Dealers Cheaper Than 4S Stores?

Secondary dealers' cars are cheaper than 4S stores for the following reasons: 1. Lower operating costs; 2. Price control by 4S stores to ensure their subordinate dealers can sell cars; 3. Some secondary dealers display cars from one 4S store but sell cars from 4S stores in other regions, mainly due to insufficient regional control by manufacturers. The differences between secondary dealers and 4S stores are as follows: 1. Different car sources: 4S stores source cars from manufacturers and general distributors, ensuring high quality; most secondary dealers source cars from 4S stores, and some may sell refurbished or overstocked cars, making quality assurance difficult. 2. Different service types: Secondary dealers mostly only sell cars without services like vehicle insurance, after-sales maintenance, or repairs; 4S stores encompass vehicle sales, spare parts sales, after-sales service, and feedback to manufacturers.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.