Are There Differences Between Highways and Urban Roads?

2 Answers
DelBlakely
07/25/25 7:48am
Highways and urban roads are different. Highways are public roads for various vehicles including cars, bicycles, rickshaws, and horse-drawn carriages, as well as pedestrians. Urban roads connect different areas within a city, serving urban transportation and logistics. The main differences between highways and urban roads are as follows: 1. Administrative Departments: Urban roads: Managed and maintained by urban construction departments, usually located within cities. Highways: Managed and maintained by transportation departments, generally categorized into rural roads, county roads, provincial roads, and national roads. 2. Alignment Indicators: Urban roads: More focused on passenger vehicles, prioritizing service functions along the route. Highways: Emphasize the driving performance of freight vehicles, prioritizing throughput. 3. Interchange Forms: Urban roads: Feature diverse interchange forms, including hub interchanges and general interchanges, with additional consideration for non-motorized traffic conditions. Highways: Primarily consist of toll interchanges or transfer hubs between high-grade highways, with relatively fixed forms such as trumpet interchanges, diamond interchanges, and cloverleaf interchanges.
Was this review help?
12
0
Share
JosieMarie
08/10/25 6:41pm
I've been driving for many years, and highways are really different from city roads. Highways are usually those long-distance expressways with much higher speed limits, like freeways where you can drive at 120 kilometers per hour. The road surface is wide and flat, suitable for fast travel. I often use them for long trips, feeling the open view but finding it quite monotonous. As for city roads, they're within urban areas, filled with traffic lights, sidewalks, and bus stops, with lower speed limits, typically 40 to 60 kilometers per hour. During rush hours, they're terribly congested, and parking is a hassle. In terms of design, highways must account for weather impacts, with sturdier road surfaces and frequent maintenance. City roads have curbs and drainage systems but are bumpier. When driving, it's advisable to use cruise control on highways to save energy, while in cities, pay attention to the safety of pedestrians and cyclists. This distinction is especially important for new drivers to avoid accidents.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

Is it permissible to proceed if the traffic light turns red after the vehicle has already passed the stop line?

If the vehicle has already passed the stop line when the traffic light turns red, it may continue to proceed. When the green light is illuminated, vehicles are permitted to pass. The "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulate the following: Green light: Vehicles are permitted to pass, but turning vehicles must not obstruct the passage of through traffic or pedestrians. Yellow light: Vehicles that have already crossed the stop line may continue to pass. Red light: Vehicles are prohibited from passing. At intersections without dedicated non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the indications of the motor vehicle traffic signal.
8
2
Share

What is the ignition temperature of gasoline in degrees Celsius?

Gasoline has an ignition temperature ranging from 415 to 530 degrees Celsius. Here are some related details about gasoline: Definition: Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through fractionation and cracking, primarily used as fuel. It appears as a transparent liquid, is combustible, and has a distillation range between 3 and 22 degrees Celsius. Its main components include C5 to C12 aliphatic hydrocarbons and cycloalkanes, along with a certain amount of aromatic hydrocarbons. Grades: Gasoline has a high octane number (anti-knock combustion performance) and is classified into different grades based on octane ratings, such as 89, 90, 92, 93, 95, 97, and 98. Starting from January 2012, the gasoline grades 90, 93, and 97 were revised to 89, 92, and 95 respectively.
18
0
Share

What Type of Engine Oil Should Be Used for a Gasoline Generator?

Engine oil can be categorized into summer oil, winter oil, and all-season oil. Therefore, the type of engine oil used for a gasoline generator should be determined based on the generator's model and the regional environment where it is used. It is best to follow the type specified in the vehicle's user manual. Below is an introduction to engine oil: Definition: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10 (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber, earning it the nickname 'the blood of the car.' Composition: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance, providing new characteristics, making them an essential part of lubricating oil.
13
1
Share

Can I Drive Without the Vehicle Inspection Sticker?

Driving without the vehicle inspection sticker is not allowed. Vehicles with damaged or missing inspection stickers may be stopped by traffic police, fined, and penalized with demerit points during road inspections. If the vehicle inspection sticker is damaged, lost, or destroyed during the validity period of the motor vehicle safety technical inspection and compulsory traffic accident liability insurance, the vehicle owner must submit the vehicle registration certificate to apply for a replacement inspection sticker. The procedure for replacing a vehicle inspection sticker involves bringing your ID card and vehicle registration certificate to the local vehicle management office at the place of vehicle registration. Fill out the sticker replacement application form and submit the documents and application to the staff. The vehicle management office will review the materials. If everything complies with regulations, they will retain the relevant documents, input the information, verify it, and issue a new vehicle inspection sticker. Generally, the new sticker can be obtained within one day. The vehicle inspection process involves driving the vehicle to the nearest inspection station for an exterior check. Cooperate with the staff to complete the motor vehicle exterior registration form, take photos, and log the information. The vehicle will then undergo online inspections, including emissions testing, speedometer testing, brake testing, lighting testing, side-slip testing, and chassis testing. After passing, collect the inspection sticker and affix it to the upper right corner of the front windshield.
17
4
Share

How long does it take to get the license plate in a 50-choose-1 selection?

If you choose the license plate through the 50-choose-1 method at the vehicle management office, you can usually get the plate immediately. In special cases, it may take 7-15 working days to receive the plate. Before the official license plate is issued, if the new car needs to be driven on the road, a temporary license plate must be obtained. Otherwise, driving without a license plate may result in the vehicle being impounded, along with penalty points and fines. Below is relevant information about temporary license plates: Introduction: A temporary license plate is a paper license plate that permits temporary road use of a motor vehicle, also known as a temporary driving license plate. It is issued by the vehicle management department for newly purchased vehicles before official registration. The validity period of a temporary license plate generally does not exceed 30 days. Placement of temporary license plates: There are usually two temporary license plates, and their placement differs. One should be placed on the lower left or right corner of the front windshield, and the other must be placed on the lower left corner of the rear windshield. They should not be placed randomly.
20
3
Share

Will I receive a notification if points are deducted from my temporary license plate?

Points deducted from a temporary license plate will result in the owner receiving a notification. If a vehicle with a temporary license plate commits a traffic violation, the owner will receive an SMS notification. Once a violation by a temporary license plate vehicle is captured, the relevant data will be promptly transmitted to the inspection station or command room, and coordinated with police at toll stations to intercept the vehicle for on-the-spot penalties. Below is relevant information about temporary license plates: Introduction: A temporary license plate is a paper vehicle license that permits temporary road use of a motor vehicle, also known as a temporary operating license plate. Temporary license plates are issued by the vehicle management department of the public security bureau for newly purchased vehicles before official registration, and their validity period generally does not exceed thirty days. Placement of temporary license plates: Typically, there are two temporary license plates, and their placement differs. One temporary license plate should be placed at the lower left or right corner of the front windshield, and the other must be placed at the lower left corner of the rear windshield. They should not be placed randomly.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.