Are there any new regulations for driver's licenses in 2020?

What's the reason for all the central control buttons in the car malfunctioning?

When the touch screen of the car's central control panel malfunctions, it is most likely due to prolonged usage leading to numerous fragmented files occupying the system memory, causing a crash. Here are some relevant solutions: 1. RST Hole Reset Button: Prepare a paperclip or a toothpick—something relatively rigid—and then press the RST hole (reset button) on the central control screen to restore it to its initial state. Similar to reinstalling a computer's operating system, over time, many junk files accumulate, and a system reset can restore normal functionality. 2. Replace the Screen: If the touch screen still malfunctions after resetting to the initial state, the issue might lie with the screen's touch points, necessitating a replacement. However, it's best to leave this task to professionals, as the panel integrates many complex circuits. Improper or incorrect installation could lead to a series of malfunctions in the central control screen, and in severe cases, could burn out components inside the car, posing certain safety hazards.

10

3

Share

Where is the appropriate oil level for adding engine oil?

For automobile engine oil, the standard level is between the minimum and maximum marks on the dipstick. In vehicles, the dipstick is a commonly used tool to check the amount of lubricating oil in the oil reservoir. Since the dipstick insertion hole has a curved path, the dipstick must be able to deform when inserted and rebound to its original shape when pulled out. Here are some related details: 1. The function of the dipstick: The dipstick measures the static oil level height, indicating whether the engine oil volume is within a reasonable range. Standard dipsticks have clear upper and lower limits. As long as the measured oil level is between these two marks, it is acceptable. 2. More oil is not always better: Ideally, the oil level should be around the middle mark. It is important to note that more oil is not necessarily better. A higher oil level increases engine resistance. The optimal oil level is slightly below the middle mark, as this minimizes engine resistance and fuel consumption while maintaining stable lubrication performance.

6

5

Share

Where is the seat adjustment located?

Car seat adjustment switches are generally located on the side of the seat. Seat adjustment switches are divided into manual adjustment and automatic adjustment. Although they look very different, their functions and principles are the same, only the control methods are changed. There are several principles for the best seat adjustment position: first, it should be comfortable to sit; second, the feet should be able to fully depress the clutch and brake pedals; third, when holding the steering wheel, the arms should be slightly bent. 1. Notes: Before adjusting the seat, the body should be pressed tightly against the seat to ensure that the hips and back are firmly against the seat, and there should be as little gap as possible between the body and the seat. This helps to avoid back injuries and improves comfort and stability during long drives. If the vehicle seat is equipped with features such as leg support and tilt angle adjustment, the primary focus should be on maximizing body contact and comfort. 2. Sitting posture: In fact, a well-adjusted sitting posture not only helps in controlling the vehicle but also ensures personal safety in critical moments. A seat back that is too upright, a seat position that is too far forward, too low, or a steering wheel that is too high are all unscientific.

5

0

Share

How to Check the Production Date Through Car Windows?

There is a code in the lower left or lower right corner of the car window glass. The last or second-to-last row contains a number and several small black dots, which indicate the production date of the glass. The number represents the production year of the glass, showing the last digit of the year, while the small black dots indicate the production month. Here are the details: 1. Month: If you carefully observe the glass of other vehicles, you will notice that some have the small black dots before the number, while others have them after the number. If the dots are before the number, subtract the number of dots from 7; if they are after the number, subtract the number of dots from 13. The result is the production month of the glass. 2. Week: Some glass may also have a few larger black dots following the production year and month, which specify the week of the month. For example, 5 dots represent the first week; 4 dots represent the second week; 3 dots represent the third week, and so on.

15

1

Share

Can cruise control be installed by oneself?

It can be installed, but it should be noted that installing a cruise control system is not an ordinary accessory installation. Its installation may involve the engine control circuit, airbags, center console disassembly, and may even alter the original vehicle circuit and wiring layout. Therefore, it is not recommended to have it installed at external repair shops without authorization; it should be installed at a 4S shop. Below are the relevant details: 1. Advantages of the cruise control system: The cruise control system monitors the road conditions ahead via radar, accelerating or decelerating based on the number of vehicles, with the entire process overseen by a computer. Moreover, the cruise control system allows the driver to free their feet during driving. 2. Disadvantages of the cruise control system: The cruise control system also has certain drawbacks. It judges road conditions based on pre-set factory instructions, but the actual road conditions while driving are far more complex than imagined. The situations on the road cannot be simply judged by a few instructions. If the actual road conditions ahead do not match the computer's expectations, it can be very dangerous.

8

4

Share

Can Temporary License Plates Be Used on Elevated Roads?

Temporary license plates can be used on urban elevated roads. According to relevant regulations, vehicles displaying a 'Temporary Vehicle License Plate' have the same access rights as other vehicles of the same type. Here are the relevant details: 1. Restrictions: Temporary license plates have time limits, usually 15 or 30 days, and location restrictions. If a vehicle is purchased locally but registered in another city, the temporary plate will specify the authorized route and can only be used within the designated cities. 2. Local Temporary License Plates: If you reside locally and plan to register the vehicle in the same city, the temporary plate is considered a local one, meaning it can only be used within that city and the vehicle cannot travel outside. 3. Invalidity Outside Local Area: If the vehicle travels outside the city, the temporary plate becomes invalid, and if discovered by traffic police, the vehicle will be treated as unlicensed. It is strongly recommended to register the vehicle at the DMV within the validity period specified on the temporary plate.

4

1

Share

Are there any new regulations for driver's licenses in 2020?

What's the reason for all the central control buttons in the car malfunctioning?

Where is the appropriate oil level for adding engine oil?

Where is the seat adjustment located?

How to Check the Production Date Through Car Windows?

Can cruise control be installed by oneself?

Can Temporary License Plates Be Used on Elevated Roads?

Does a B2 license require annual inspection every year?

What are the correct methods for starting and parking an automatic transmission vehicle?

How to Adjust the Rearview Mirror of a Passat?

Why does the Jetta reverse gear shift into first gear?