Are there any discounts for the Guangzhou Aion Y?

What is the shrinkage rate of ABS?

ABS has a normal shrinkage rate of 0.45%. Introduction to ABS: ABS material is a graft copolymer composed of three monomers: acrylonitrile, 1,3-butadiene, and styrene. ABS is not affected by water, inorganic salts, alkalis, and various acids, but it can dissolve in ketones, aldehydes, and chlorinated hydrocarbons. Exposure to glacial acetic acid or vegetable oil can cause stress cracking. ABS has poor weather resistance and tends to degrade under ultraviolet light; after six months outdoors, its impact strength decreases by half. Introduction to shrinkage rate: Different raw materials have different shrinkage rates. Generally, fibers with high hygroscopicity will expand in diameter and shorten in length when soaked in water, resulting in a higher shrinkage rate. For example, some viscose fibers have a water absorption rate of up to 13%, while synthetic fiber fabrics with low hygroscopicity have a smaller shrinkage rate. Density also affects shrinkage rate. If the warp and weft densities are similar, their shrinkage rates will be close. Fabrics with higher warp density will have greater warp shrinkage, and conversely, fabrics with higher weft density will have greater weft shrinkage.

6

5

Share

What is the volume of the urea tank in liters?

20kg urea tank is 15 liters. Function of automotive urea: Automotive urea reduces nitrogen oxides in vehicle emissions, lowering the level of exhaust pollution. Automotive urea solution is a colorless, transparent, and clear liquid with a concentration between 31.8 and 33.2. Currently used automotive urea solutions are generally composed of 32.5% high-purity urea and 67.5% deionized water. Automotive urea solution is key to reducing pollutant emissions from diesel vehicles. It is a urea-based chemical reactant, made by mixing high-purity urea with deionized water, forming a 32.5% concentration solution. Applying automotive urea solution in the SCR (Selective Catalytic Reduction) system is crucial for achieving engine exhaust emissions that meet China IV and higher emission standards. Automotive urea: Automotive urea, also known as Diesel Exhaust Fluid (DEF), is essential for reducing nitrogen oxides in vehicle exhaust and lowering pollutant emissions from diesel vehicles. It is also a necessary consumable in SCR (Selective Catalytic Reduction) technology.

17

3

Share

What does 'apply for car removal 5 times' mean?

It refers to the traffic management service '12123' providing five car removal application services per month, with each vehicle owner allowed to initiate a maximum of 5 car removal requests monthly. Introduction to '12123': The mobile application '12123' is a client launched by the Internet-based Comprehensive Traffic Safety Service Management Platform, with technical support provided by the Traffic Management Research Institute of the Ministry of Public Security. The app allows users to handle traffic violations related to motor vehicle driving licenses, schedule and process services related to driving licenses and motor vehicles. The operational process is relatively simplified, saving users time. One-click car removal function: The '12123' mobile app also features a convenient one-click car removal service. Upon opening the app, the one-click car removal option is visible on the homepage. After clicking this option, the system will locate your position, then prompt you to fill in accurate information about the obstructing vehicle and take and upload photos of the scene.

8

1

Share

How to Operate Car Turn Signals for Left and Right Turns?

Car turn signal operation method: up for right, down for left. Turning the signal lever upwards (clockwise) activates the right turn signal, while turning it downwards (counterclockwise) activates the left turn signal. Below are relevant details: 1. When overtaking, first activate the left turn signal, then the right. Use the left signal when entering a highway and the right signal when exiting. No signal is needed when entering a roundabout, but use the right signal when exiting. Activate the right turn signal when pulling over to park and the left signal when starting from a parked position. Use the left turn signal when making a U-turn. Turn signals are required when changing lanes. 2. When preparing to turn, activate the turn signal 10-20 seconds in advance to give following drivers sufficient reaction time. However, the exact timing should be determined based on road conditions, traffic situation, and vehicle speed, but generally not less than 10 seconds.

9

4

Share

Reasons for the Persistent Illumination of the T-Roc Tire Pressure Monitoring Indicator Light

T-Roc tire pressure monitoring indicator light staying on indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following 3 reasons: Abnormal tire pressure: Usually, it will trigger an alarm when the pressure is below 1.8bar or exceeds 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to stay on. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is installed directly inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to illuminate. In case of sensor damage, the only solution is to replace it with a new part.

15

0

Share

Where is the Ford Focus engine located?

The engine number of the Ford Focus is located on the cylinder block at the interface between the engine and the transmission. Below are the precautions for using a car engine: 1. Avoid driving in neutral: The engine itself has a fuel cut-off function during deceleration, and driving in neutral is actually not conducive to fuel economy. 2. Pay attention to observation during daily use of the vehicle. If oil is found on the ground, determine whether there is an engine oil leak and communicate with the car 4S store in time to eliminate potential safety hazards. 3. For cars equipped with turbochargers, do not turn off the engine immediately after high-speed driving or climbing a slope. Let it idle for 10 minutes before turning it off. 4. When brake fluid is mixed with or absorbs water, or if impurities or sediment are found in the brake fluid, it should be replaced or carefully filtered in time. Otherwise, it may cause insufficient braking pressure, affecting the braking effect.

20

5

Share

Are there any discounts for the Guangzhou Aion Y?

What is the shrinkage rate of ABS?

What is the volume of the urea tank in liters?

What does 'apply for car removal 5 times' mean?

How to Operate Car Turn Signals for Left and Right Turns?

Reasons for the Persistent Illumination of the T-Roc Tire Pressure Monitoring Indicator Light

Where is the Ford Focus engine located?

Will Not Driving a Car for a Month Have Any Impact on the Vehicle?

What are the effects of severe tire wear?

What are the characteristics of selecting lubricants for enclosed gears?

What is the actual fuel consumption of the Odyssey?