Are the tires at 4S stores all original factory tires?

1 Answers
VanMicah
07/29/25 7:23pm
4S stores use original factory tires because all replacement parts at 4S stores need to be covered by warranty. Using original factory tires can to some extent enhance structural and performance guarantees. The parts used by 4S stores are directly supplied by manufacturers. If you go to an authorized 4S store for replacement, the tires will be identical to the original ones with no difference. During replacement, you can check the part number to verify if it's an original factory part. Advantages of using original factory tires: High compatibility with the vehicle: Original tires (parts) designed specifically for each vehicle model ensure the same technical condition and quality as new car parts, maintaining the vehicle's premium performance. Quality assurance: Every original tire (part) used by 4S stores is quality-certified by the automaker, ensuring reliable operation. Long warranty period: For genuine parts replaced at the customer's expense, replaced free of charge, or replaced free of charge due to recall repairs outside the vehicle warranty period (excluding vulnerable parts specified in the home vehicle three-proof certificate), the quality warranty period is 1 year or 20,000 kilometers. Whichever comes first between time and mileage applies.
Was this review help?
11
5
Share
More Forum Discussions

What is the original tire brand for the Focus?

The original tire model for the Focus is 205/60R16. The maintenance of tires mainly requires the following methods: 1. Increase awareness of tire safety. Regularly inspect tires, especially before driving on highways. Conduct thorough and detailed checks, including not only tire pressure but also observing whether there are cracks on the sidewalls and the wear condition of the tread. Address any potential hazards promptly. 2. Regularly correct wheel balance. Excessive wheel imbalance can cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repairs, dynamic balance testing and adjustment should be performed. The dynamic balance test value for a single side of the tire should be less than or equal to 40 grams. 3. Regularly rotate tires. To ensure even wear on all tires of the same vehicle, rotate the tires every 5,000 kilometers and perform a four-wheel alignment every 5,000 to 10,000 kilometers to avoid abnormal excessive wear. It is not allowed to install tires of different models or with significant differences in wear on the same axle.
15
0
Share

Where is the chassis number of the Freelander 2 located?

The chassis number of the Land Rover Freelander 2 is located near the spare tire in the trunk, specifically below the rear seats where you can reach in to feel it. Here is more information about the chassis number: 1. The chassis number is the Vehicle Identification Number (VIN) found on the vehicle's registration certificate. The VIN is a 17-character code composed of letters and numbers, also known as the 17-digit identification code, chassis number, or 17-digit number. 2. The combination and arrangement of the vehicle identification code ensure that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for the vehicle, hence it can be referred to as the 'car's ID card.' 3. The chassis number follows specific rules. Illegal characters include O, Q, I, and 0. The letter Z is invalid in the year position. The ninth character can only be a digit from 0 to 9 or the uppercase letter X. The following four digits must all be numbers and cannot be letters.
13
4
Share

Can the Haval H9 be modified with -13 offset wheels?

No, there are significant differences between positive offset wheels and negative offset wheels. Positive offset wheels: Since the wheel mounting surface faces outward, the tire's force application point is biased toward the outer side of the wheel center point, providing a more reasonable balance in terms of load capacity and traction (for soft-axle vehicles). The most important point is that positive offset wheels can be partially concealed within the vehicle's suspension components, serving a protective function against impacts. Negative offset wheels: The advantages are their attractive and imposing appearance, as well as improved stability. However, they tend to throw more mud and increase suspension impact forces. You can first determine the original wheel's ET value. Then measure the distance between the original wheel's outer side and the fender. If you want a more aggressive look, you can decide to move the wheels outward. This way, you can change from positive offset to negative offset.
11
4
Share

Which is more fuel-efficient, normal mode or eco mode?

eco mode is relatively more fuel-efficient. The relevant information about normal mode and eco mode is as follows: Concept of normal mode: Normal mode is the standard driving mode, which is the ordinary mode when driving a car. Normal mode is suitable for urban driving. When the car is in normal mode, the car's transmission and throttle will be in a relatively balanced state, making the occupants more comfortable. Concept of eco mode: Eco mode is the economical mode. When the vehicle is in this mode, the throttle response becomes more sluggish, the transmission shifts more proactively, and the engine speed is maintained in a relatively low range, thereby achieving the goal of fuel efficiency. Difference between normal mode and eco mode: There is a difference in energy consumption. Eco mode operates in a low-energy and environmentally friendly state, while normal mode operates in a standard power consumption state, with normal mode consuming more energy than eco mode.
14
5
Share

Does BMW have remote start?

Only some model series have the remote start function. Some model series do not have the remote start function. Model series without remote start: The original BMW vehicles are not equipped with this function, but they are equipped with remote software upgrade functionality, which can be configured through the BMW ConnectedDrive store. Many BMW models can wirelessly install this system, including the 320i, 330i, and M340i models produced since July 2019, the entire 4 Series Coupe lineup produced since July 2020, the 520i and 530i models produced since July 2020, and the 740i, 740Li, and 840i models produced since July 2019. Remote start function: This system allows the owner to start the engine from any location via the BMW ConnectedDrive app, with each start lasting up to 15 minutes, optimizing the cabin conditions before the driver and passengers enter the vehicle.
5
3
Share

Where is the chassis number of the Mercedes-Benz S280?

It is located under the windshield wiper inside the car. The Mercedes-Benz S280 stands out in terms of exterior design and powertrain configuration. Exterior of the Mercedes-Benz S280: The overall body lines have been refined from the slightly bulky appearance of the past to a more balanced and proportionate shape, combined with a windshield and hood featuring a steeper rake angle. These seemingly minor modifications have yielded tangible results, achieving a drag coefficient of just 0.27. The use of lightweight metals has also significantly reduced the vehicle's weight. Interior of the Mercedes-Benz S280: The cabin features light gray leather paired with premium burl wood, creating a strong sense of modernity. Additionally, Mercedes now offers the luxurious Designocouture interior package, which includes top-quality Nappa leather and suede leather trim, charcoal gray poplar or maple wood veneers, and a premium Alcantara fabric headliner.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.