Are the Three Major Components of GAC Acura RDX Imported?

2 Answers
GiselleLynn
08/29/25 7:25am
GAC Acura RDX's three major components are not imported. Here is some relevant information about GAC Acura: 1. Introduction: Acura originates from the Latin word 'Accuracy,' meaning 'precision.' The concept of 'precision' dates back to Acura's original car-making philosophy of 'meticulous craftsmanship, creating the perfect car.' 2. Exterior: The current Acura RDX has dimensions of 4590mm in length, 1870mm in width, and 1655mm in height, appearing quite agile and is a typical compact SUV. The front face is divided into left and right parts by a vertical line, with four small protrusions on the lower edge of the grille. The side waistline is high and forward-leaning, visually lowering the height of the front end, giving it a more sporty feel.
Was this review help?
1
5
Share
VonBentley
09/11/25 4:57am
I once researched automotive components and was particularly interested in the three major parts of the GAC Acura RDX. The engine and transmission of this car are said to be imported from Japan, as Acura is Honda's premium brand. Core components like the 2.0T turbocharged engine and 10-speed automatic transmission remain original imports, ensuring performance reliability and smooth driving control. Although the chassis system is partially assembled locally, its key technologies originate from Honda's global design platform. This combination balances quality and cost, making the vehicle perform well in durability. If you notice smooth acceleration or seamless gear shifts during daily driving, you can experience the advantages of imported parts. GAC's production line employs strict quality checks, but imported parts may be slightly more expensive for repairs and replacements. Regular maintenance is recommended to avoid issues. Overall, the dominance of imported parts is a key reason many owners choose it.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What to do if the valve cover of the Tiida is leaking oil?

To fix a leaking valve cover on a Tiida, simply replace the valve cover gasket. The function of the car valve is to specifically input air into the engine and expel exhaust gases after combustion. In terms of engine structure, it is divided into intake valves and exhaust valves. The intake valve's role is to draw air into the engine to mix with fuel for combustion; the exhaust valve's role is to expel the burned exhaust gases and dissipate heat. Symptoms of damaged car valves are as follows: 1. It will affect the engine's efficiency, reducing the car's power; 2. It will produce abnormal noises, the engine may experience unstable idling or poor acceleration during operation, overtaking performance may also decrease, in severe cases, it may cause difficulty starting the engine, leading to failure to ignite, and the car may also experience air leakage or increased carbon deposits; 3. Damaged valves can cause unstable cylinder operation, leading to engine shaking, lack of engine power, and may also lead to blockage of the exhaust pipe, in severe cases, it may cause the exhaust to emit black smoke.
3
4
Share

What is the BMW e92 model?

BMW e92 is the two-door hardtop version of the fifth-generation BMW 3 Series, with e92 being the codename for this model. The fifth-generation BMW 3 Series includes e90, e91, e92, and e93. The e90 is the four-door hardtop version, e91 is the wagon version, and e93 is the two-door convertible version. Here are more details: 1. The BMW e92 has used many engines, but the most powerful version is equipped with a 3.0-liter turbocharged inline-six engine. The model with the inline-six twin-turbocharged engine was not introduced to the domestic market. 2. The 3.0-liter inline-six turbocharged engine in the BMW e92 is codenamed N55, delivering over 300 horsepower in its stock configuration. This engine is paired with a 7-speed dual-clutch transmission from Getrag. 3. The BMW e92 features a double-joint independent suspension at the front and a multi-link independent suspension at the rear.
11
2
Share

How to use the S gear in the new Focus?

Introduction to using the S gear in Focus: The S gear is the sports mode of the vehicle. During driving, you can directly shift into S gear without braking or stopping, allowing free switching. Here are some relevant introductions about the S gear: 1. The S gear is set to sports mode, which increases the RPM during gear shifting to keep the engine speed in a relatively high range for enhanced power. Therefore, upshifting in S gear is slower than in D gear (higher RPM), but downshifting is faster than in D gear. 2. Principle of S gear: In general automatic transmission cars and CVT-equipped cars, the cruising speed in D gear is set below 2000 RPM, and it will upshift when exceeding 2000 RPM. When using the S gear, the increased RPM leads to greater fuel injection by the engine, resulting in higher output power and thus enabling the car to achieve higher speeds. The upshift mechanism of the S gear is delayed upshifting, which increases the load on the transmission in a short time, intensifies friction loss, and raises the temperature. Prolonged use may affect the engine's lifespan.
14
1
Share

Can ETC be used in other provinces?

ETC can be used in other provinces, as the nationwide expressway ETC network was established in 2015. Precautions for ETC usage: The ETC transaction sensing range is 8 meters. When the vehicle in front stops, maintain a distance of more than 10 meters to prevent automatic payment for the front vehicle in case its ETC device malfunctions or is absent. The recognition speed limit in ETC lanes is 20km/h. Excessive speed may result in failure to read vehicle device information and unsuccessful fee deduction. Unauthorized removal or movement of the OBU device, or detachment/loosening of the ETC electronic tag will render it ineffective. It can be tested at the bank where the ETC card was issued or at the expressway service office. Non-deliberate detachment or loosening only requires reactivation. When using a debit card linked to ETC, insufficient balance may cause fee deduction failure. Follow on-site staff guidance to use manual MTC lanes with cash or card payment. Overly thick windshields may cause poor signal reception. This is particularly relevant for vehicles with replaced windshields after accidents or modified front windshields.
8
5
Share

What to Do If ETC Fails to Deduct Fees on the Highway?

If you have already passed the exit but the ETC has not deducted the fee, the fee from the last time can be deducted together the next time you exit the toll station. If the toll station cannot resolve such issues, you need to bring your ID card, vehicle license, and OBU device to the local ETC service center for fault inspection. How ETC Works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, the computer network technology is used to perform backend settlement processing with the bank. This allows vehicles to pass through highway or bridge toll stations without stopping while still being able to pay the highway or bridge fees. Where ETC Can Be Installed: For small vehicles such as cars and minivans, the OBU device is installed in the upper-middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the middle-lower part. ETC Installation Position Requirements: The height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).
15
4
Share

How often should the Crown differential oil be changed?

The Crown differential oil should be changed every 60,000 kilometers. The function of the differential is to meet the requirement of different wheel speeds when the car is turning. The car differential enables the left and right (or front and rear) drive wheels to rotate at different speeds. It is mainly composed of left and right half-shaft gears, two planetary gears, and a gear frame. The steps to replace the car differential oil are as follows: 1. First, lift the car and place a large container underneath to catch the waste oil. Use an appropriate screwdriver to remove the inner and outer casings of the transmission. Be cautious as some transmission oil may flow out during this process. 2. Once most of the oil has drained, carefully remove the last oil pan, making sure to support it by hand as it may still contain a significant amount of waste oil. 3. Remove the oil pan gasket and clean the surrounding area. If there are hard-to-reach spots, use tools and cotton cloth to thoroughly clean all the filtered transmission oil components before reinstalling them one by one. 4. Wipe the surfaces of the replacement parts clean, ensuring there are no water or oil stains, as these can lead to oil leaks. Reinstall the cleaned oil pan and gasket, then add the manufacturer-recommended oil. Check the oil level through the fill observation hole; when the oil is full, it will start to flow out from this hole.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.