Are the results of Subject One released immediately after the exam?

2 Answers
AlexRose
07/24/25 5:46am
For the Subject One exam, you will receive an immediate notification if you pass. However, the specific score will be available for viewing on the 12123 platform approximately 24 hours later. You can also gauge your performance during the exam itself, as the system indicates whether each answer is correct right after submission. By considering the allocated points for each question and your accuracy rate, you can estimate your score. Here is some additional information: 1. Subject One: Also known as the theoretical driving test or driver's theory exam, Subject One is part of the assessment for obtaining a motor vehicle driver's license. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the exam covers foundational driving theory, road safety laws and regulations, local statutes, and related knowledge. The test is computer-based, consisting of 100 questions, with a passing score of 90 or above. 2. Important Notes: Cancellation of the exam must be done six days in advance. Failure to cancel or attend the exam will result in a failing grade, requiring payment of a retake fee to reschedule. There are two attempts for Subject One. If both attempts result in failure, a retake fee is required to schedule the next retake.
Was this review help?
6
4
Share
StLondyn
08/11/25 1:28am
After completing the subject one exam, the results are usually displayed immediately. Having worked at a driving school for many years, I've seen countless students finish the test, and the computer screen immediately shows the score—you can see the result right away. The system is designed for efficiency to save time and reduce anxiety. Once you submit your answers, the calculation is done automatically, and your score flashes on the screen. If you unfortunately fail, don't worry—you can immediately schedule a retake, and the fee is generally low. After the exam, I recommend finding a quiet place to relax while starting to review subject two's starting and parking procedures. The core of safe driving lies in solid foundational knowledge, so practicing with APP question banks regularly is crucial. This instant-result model makes the entire learning process smoother, helping you plan your next steps sooner by knowing the outcome early.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

What car has the Volkswagen logo with letters?

There are many Volkswagen models with letters on the logo, such as the Phaeton, Phideon, Touareg, new Passat, and new Magotan. Taking the Phaeton as an example: it is a luxury sedan produced by Volkswagen AG in Germany. In terms of appearance, it continues Volkswagen's low-key and moderate styling, with the front bumper and grille incorporating the brand's new family design. In terms of power, the Phaeton is equipped with a 3.0L V6 naturally aspirated engine and a 4.2L V8 naturally aspirated engine, with maximum power outputs of 184kW and 246kW, maximum torques of 310Nm and 430Nm, and maximum power speeds of 6400rpm.
18
3
Share

How to Remove a Valve Core?

The method to remove a valve core is: 1. Use a professional removal tool, such as a valve screwdriver, and turn it counterclockwise to remove the valve; 2. Use a valve core tool, align the groove with the valve core, and turn it counterclockwise to remove the core. The valve core is installed inside the valve stem and functions as a one-way valve, preventing air leakage from the inner tube and allowing for pressure checks and adjustments. Precautions when removing the valve core: 1. A few drops of oil can be added before removal; 2. Avoid using excessive force during the removal process. The main types of valve cores include British, American, French, German, and Italian valve cores.
4
5
Share

How to Install Brake Pads on a Nissan Tiida?

Installation method for Nissan Tiida brake pads: 1. Open the cap of the brake fluid reservoir in the engine compartment and check the brake fluid level; 2. Prepare the new brake pads for replacement, remove the wheel where the brake is located, avoiding scratching the rim during the process; 3. Remove the brake caliper bolts and take off the old brake pads; 4. Clean sand and dirt from the brake caliper and apply noise reduction paste; 5. Use a piston press to push the piston to its limit, install the new brake pads onto the caliper, tighten the guide bolts after the new pads are properly positioned, and complete the installation; 6. Reset the brake and observe the brake fluid level.
10
3
Share

What brand are the original tires on the Corolla?

The original tires on the Corolla are Bridgestone brand, with a size of 205/55/R16. Car tires are one of the important components of a vehicle, as they directly contact the road surface and work together with the car's suspension to absorb shocks during driving, ensuring good ride comfort and smooth driving. They also ensure good adhesion between the wheels and the road surface, thereby improving the car's traction, braking, and maneuverability. The Corolla is a compact sedan equipped with a CVT transmission and has a top speed of 180 km/h. The dimensions of the car are 4635mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. It comes with features such as knee airbags, tire pressure monitoring, engine immobilizer, brake force distribution, and hill start assist.
1
4
Share

How to Remove the Navigation System in Toyota Highlander?

Toyota Highlander navigation removal method: Use a plastic pry tool to loosen the air vents, remove the surrounding decorative panels, internal connectors, and the air conditioning controller, then unscrew the mounting screws to successfully remove it. When removing the Toyota Highlander navigation system, be aware that there are numerous internal wiring connections, so avoid applying excessive force to prevent damage. The Toyota Highlander comes equipped with an OEM navigation system featuring G-BOOK. To use the navigation, press the DEST button on the left side of the screen to access the destination selection menu. Input the destination into the car's navigation system, and it will automatically calculate the optimal route. During driving, the system provides real-time traffic updates to assist the driver in maneuvering the vehicle.
5
1
Share

How to reset the tire pressure warning light on the 12th generation Crown?

The method to reset the tire pressure warning light on the 12th generation Crown is: Press and hold the tire pressure reset button located above the brake pedal under the steering wheel to reset it. The level of tire pressure is crucial for a car's performance and power, so it's important to regularly check the tire pressure. There are two types of tire pressure monitoring systems: direct and indirect. The 12th generation Crown is a mid-to-large-sized sedan under the Toyota Group, with body dimensions of 4109mm in length, 1694mm in width, and 1537mm in height, a wheelbase of 2530mm, tire specifications of 185/60R1584H, and is equipped with a 3.0L naturally aspirated engine.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.