Are the Questions in Subject 1 and Subject 4 the Same?

1 Answers
DelJessica
07/29/25 2:32pm
The questions in Subject 1 and Subject 4 are different. The main differences between Subject 1 and Subject 4 include: the number of questions, types of questions, proportion of exam content, and exam focus. The information is based on the "Regulations on the Application and Use of Motor Vehicle Driving Licenses". Number of Questions: The most obvious difference between Subject 1 and Subject 4 is the number of questions. Subject 1 has 100 questions, while Subject 4 only has 50 questions. In Subject 1, the exam will automatically submit if more than 10 questions are answered incorrectly, whereas in Subject 4, the exam will automatically submit if more than 6 questions are answered incorrectly. Types of Questions: Subject 1 consists of 100 questions, each worth 1 point, with a total exam time of 45 minutes. The question types are true/false and single-choice questions, with a full score of 100 points. Subject 4 consists of 50 questions, each worth 2 points, with an exam time of 45 minutes. The questions are mainly presented in the form of case studies, images, animations, etc., and the question types include true/false, single-choice, and multiple-choice questions, with a full score of 100 points. Exam Focus: Subject 1 primarily tests basic knowledge of road driving, while Subject 4 focuses on safe and civilized driving knowledge. It can be understood this way: Subject 1 tests how to drive, while Subject 4 tests how to drive safely. Although the difference is just two words ("safe driving"), the focus is completely different. Proportion of Exam Content: Subject 1 exam content consists of: 20% on driving license and motor vehicle management regulations; 25% on road traffic conditions and regulations; 25% on road traffic safety violations and penalties; 10% on road traffic accident handling regulations; 10% on basic motor vehicle knowledge; and 10% on local regulations. Subject 4 exam content consists of: 20% on safe driving knowledge; 18% on civilized driving knowledge; 8% on the comprehensive application of road traffic signals in traffic scenarios; 16% on safe driving knowledge under adverse weather and complex road conditions; 12% on emergency avoidance knowledge; 6% on typical accident case analysis; 10% on traffic accident rescue and common hazardous chemical handling knowledge; and 10% on local questions. There is no limit to the number of attempts for Subject 1 and Subject 4 in the driving test. If the exam is failed, it can be rescheduled. Each scheduled exam has two attempts. If both attempts are failed, the candidate must retake the exam until they pass. Both Subject 1 and Subject 4 are theoretical exams and are part of the motor vehicle driving license assessment. The driving test consists of 3 subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the exam on road traffic safety laws, regulations, and related knowledge; Subject 2 refers to the field driving skills exam; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge exam is conducted after Subject 3, so it is commonly referred to as Subject 4. However, in official terms (i.e., the Ministry of Public Security's Order No. 123), there is no mention of Subject 4.
Was this review help?
2
1
Share
More Forum Discussions

Is it necessary to replace tire pressure warning with tire pressure display?

Tire pressure display and tire pressure warning both serve driving safety, and both are good options, mainly depending on the driver's usage habits. Below are specific introductions about tire pressure display and tire pressure warning: The difference between tire pressure display and tire pressure warning: Tire pressure display allows for a direct view of tire pressure, while tire pressure warning is just an alarm system that alerts when the tire pressure is too high or too low. The hazards of abnormal tire pressure: Insufficient tire inflation pressure can lead to excessive tire wear, poor vehicle control, reduced fuel economy, and may also cause wheel deformation, so it is important to keep the tire inflation pressure within the specified range.
17
4
Share

What brand is Kaytoon tire?

Kaytoon is a brand under Kenda Tires. Kenda Tires belongs to Zhongce Rubber Group Co., Ltd. Established in 1958 and headquartered in Hangzhou, Zhongce Rubber Group is a large-scale tire enterprise integrating R&D, production, and sales. The group owns multiple tire brands including Chaoyang, Westlake, Goodride, and Yartu. Its non-warranty brands include Dida, Anda, Kenda, and O'Neal, covering passenger cars, commercial vehicles, trucks, buses, and engineering vehicles. Development history of Zhongce Rubber Group: 1958: The predecessor of Zhongce Rubber—Hangzhou Haichao Rubber Factory—was established, mainly producing rubber shoes, rain boots, and bicycle tires. 1966: Hangzhou Haichao Rubber Factory was renamed Hangzhou Rubber Factory. June 1970: The company's first branch, Yangxi Branch, was established in Xin'anjiang, marking Zhongce's expansion into the tire industry. July 1, 1992: The company formed a joint venture with Hong Kong Zhongce Investment Co., Ltd., establishing Hangzhou Zhongce Rubber (Stock) Co., Ltd. 1993: Purchased 423 acres of land in Xiasha Economic Development Zone as a new base for producing all-steel radial tires. 1998: Hangzhou Chaoyang Rubber Co., Ltd. was established, initiating the production of all-steel radial tires. 2000: The first phase of Xiasha's 300,000-unit all-steel radial tire production line commenced operation. Since 2008: Established overseas subsidiaries including Haichao Trading, and branches in the U.S., Brazil, and Germany. 2013: The company was renamed Zhongce Rubber Group Co., Ltd. and relocated to No. 1, 1st Street, Xiasha. March 2015: Its wholly-owned subsidiary, Hangzhou Zhongce Car Space Automotive Service Co., Ltd., was established. June 29, 2015: The first overseas production base—Zhongce Rubber (Thailand) Co., Ltd.—commenced operations. September 8, 2016: Zhongce Rubber (Anji) Co., Ltd. began production. July 2018: Zhongce Rubber successfully held its Global Partners Conference, accelerating its global expansion. Tires operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during use. Thus, they must possess high load-bearing, traction, and cushioning performance, along with excellent wear and flex resistance, while maintaining low rolling resistance and heat generation. Directly contacting the road surface, tires work with the vehicle's suspension to absorb shocks, ensuring ride comfort and smoothness. They also enhance traction, braking, and off-road capability while supporting the vehicle's weight. Kenda tire maintenance methods: Enhance awareness of tire safety and conduct regular inspections. Periodically adjust wheel balance to prevent high-frequency vibrations during high-speed driving, which can cause uneven wear. Rotate tires every 5,000 km to ensure even wear across all tires on the vehicle. Daily usage tips for Kenda tires: Regularly check for surface cracks or deformations. As tread grooves wear down, traction and water dispersion diminish, significantly reducing performance. Small cracks may lead to blowouts at high speeds. Remove stones lodged in grooves promptly. Park on level ground. Avoid parking on surfaces with sharp or large stones. Keep away from oil, acids, or other substances that degrade rubber. Avoid turning the steering wheel while parked to prevent accelerated wear. Do not splash water to cool overheated tires. In hot weather or after high-speed driving, allow tires to cool naturally—never deflate or use water, as this may cause abnormal aging. Avoid sudden braking. Minimize hard or frequent braking to reduce tread wear from skidding.
3
3
Share

What are the requirements for obtaining a Guangzhou license plate?

To purchase a car and obtain a license plate in Guangzhou, the following conditions must be met: having obtained a license plate quota through the license plate lottery or bidding system, having legally purchased a new car, having paid the purchase tax, having purchased insurance (compulsory traffic accident liability insurance for motor vehicles), and having paid the vehicle and vessel tax. Below are the relevant regulations for obtaining a license plate in Guangzhou: 1. License plate application for non-locals: Non-local residents in Guangzhou can purchase cars and obtain license plates in Guangzhou, but they must also obtain a license plate quota through the license plate lottery or bidding system. Non-local residents must meet certain conditions to participate in the lottery or bidding. 2. Relevant regulations: For non-local residents applying for an incremental quota, the requirement of "having continuously paid (excluding back payments) basic medical insurance in the city for more than two years" is interpreted as meeting one of the following three conditions: having reached the legal retirement age and having accumulated payment years of employee social medical insurance in the city that meet the current medical insurance policy requirements; having a work unit located in Guangzhou, working (including retirement) in Guangzhou, and enjoying public medical care (including provincial, municipal, and district levels) continuously for more than two years; or having enjoyed the above public medical care and participated in the city's basic medical insurance continuously for more than two years.
17
5
Share

Is a 10-year-old Audi considered old?

A 10-year-old Audi is considered old. Introduction to the service life of Audi vehicles: Non-commercial passenger vehicles with 9 seats or fewer (including sedans and SUVs) have a service life of 15 years. If the vehicle meets the scrapping standards but the owner wishes to continue using it, approval is required. After passing inspection, the service life can be extended. Such vehicles must undergo biannual inspections, and after 20 years, they must undergo inspections four times a year starting from the 21st year. According to national regulations, most models have similar service life expectations, including the Audi A6L. Introduction to vehicle service life: Non-commercial sedans are mandatorily scrapped after reaching 600,000 kilometers. Assuming an annual mileage of 20,000 kilometers, owners can drive them for up to 20 years. Under new regulations for private vehicles, starting from the 15th year after registration, vehicles must undergo two annual inspections per year. After 20 years, inspections increase to four times per year starting from the 21st year. If a vehicle fails inspection, it must be declared scrapped. The new regulations impose strict requirements on older vehicles during inspections. During power tests for private vehicles, the chassis output power must not be less than 60% of the engine's rated power or 65% of the maximum net power. Additionally, the new standards stipulate that vehicles failing safety or environmental inspections during an inspection cycle will be mandatorily scrapped.
18
0
Share

What is the difference between the Highlander A25D and the Land Cruiser A25F?

The Highlander A25D and the Land Cruiser A25F have no difference. Reasons for no difference: Both are equipped with a 2.5L naturally aspirated engine, with a maximum horsepower of 192ps, a maximum power of 141kw, a maximum power speed of 6000 rpm, a maximum torque of 238nm, and a maximum torque speed of 4200 to 4600 rpm. In terms of the powertrain: Taking the 2.5L hybrid model as an example, the engine model of the Crown Land Cruiser is A25F, while that of the GAC Toyota Highlander is A25D. Apart from the different engine models, it is difficult to find any other differences between the two. Highlander: Taking the 2.5L Hybrid Two-Wheel Drive Elite 5-seater version as an example: It is a mid-size SUV launched by GAC Toyota, with a length, width, and height of 4965mm, 1930mm, and 1750mm respectively. The drive mode is front-wheel drive, the front suspension type is MacPherson independent suspension, the rear suspension type is E-type multi-link independent suspension, and the steering assistance type is electric power steering.
19
4
Share

Can painted wheels pass the annual inspection?

Painted wheels can pass the annual inspection, but the color change needs to be registered at the vehicle management office. Below is relevant information about vehicle annual inspections: 1. Introduction: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for vehicles according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections help promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Relevant regulations on vehicle annual inspections are stipulated in documents such as the "Regulations for the Implementation of the Road Traffic Safety Law." Some preparations are required before the inspection (such as knowing relevant information, online appointments, procedures, and issues to pay attention to) to ensure a smooth and successful pass. There are initial and regular annual inspections, as well as some related policies. 2. Timing: Vehicles can apply for an annual inspection within three months before the inspection date. It is best to apply two months or more in advance, rather than waiting until just a few days before the inspection deadline. Additionally, before the 10th of each month, inspection stations have relatively fewer appointments, making it an ideal time to avoid queues. The number of vehicles increases in the middle of the month, and the end of the month is the peak period.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.