Are the Highlander 7-seater and 5-seater the same size?

Can Radiator Coolant and Antifreeze Be Mixed?

Radiator coolant and antifreeze can be mixed, as radiator coolant is essentially an improved version of antifreeze. How to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze levels, though it could also be caused by excessively high engine temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and promptly add antifreeze. Inspect the water level indicators on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If it falls below the minimum mark, it indicates a shortage of antifreeze. Antifreeze replacement cycle: For vehicles that operate for extended periods, such as taxis, high-quality antifreeze should generally be replaced annually. For vehicles with shorter operating hours, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding. Long-life antifreeze can remain effective for up to three years. If suspended particles, sediments, or signs of deterioration or discoloration are observed in the antifreeze, replace it immediately and clean the system.

7

4

Share

How to Interpret the P0700 Trouble Code?

P0700 trouble code, applicable to all car manufacturers, means Transmission Control System Malfunction (MIL Request). Solution: The appearance of this trouble code indicates a problem with the transmission. If there is an issue with the transmission, it is recommended to promptly visit a 4S shop for inspection and repair. Additional Information: 1. The Transmission Control Module (TCM or TCU) helps the transmission decide when and how to shift gears by collecting information from various sensors and the Engine Control Module, thereby improving vehicle performance, ensuring smooth gear shifts, and saving fuel consumption. 2. The Malfunction Indicator Lamp (MIL), also known as the Check Engine Light, illuminates a yellow or red engine symbol on the dashboard when the control module detects a fault. This trouble code indicates that the Powertrain Control Module (ECU) has received a request from the Transmission Control System (TCU) to illuminate the Malfunction Indicator Lamp.

18

2

Share

How to Activate One-Touch Window Roll-Up with Key for Buick Excelle?

You need to visit a 4S shop to refresh the vehicle's program. After refreshing, press and hold the lock button on the key for a few seconds to roll up the windows. However, for models without this hidden feature, you will need to install a window lift module to achieve one-touch window roll-up with the key. One-touch window roll-up refers to a system where the window glass can be controlled to roll up or down with a single press of a button. It can be controlled either through the window button or via the smart key's switch. Currently, mid-to-high-end models are equipped with the one-touch window roll-up feature, which effectively enhances convenience and safety. More details are as follows: 1. One-touch window roll-up with smart key: The working principle involves the key emitting radio waves, which are then executed by the system's actuator to perform the roll-up or roll-down action. Press and hold the unlock button on the key to automatically lower all four windows, and press and hold the lock button to automatically raise all four windows. 2. Window button control: Briefly press the window button to automatically lower the window completely. If you press and hold the button, releasing it will stop the window from descending further. Briefly lift the window button to automatically raise the window completely. If you lift and hold the button, releasing it during the ascent will stop the window from rising further.

5

4

Share

How to Remove New Car Odor?

Methods to remove new car odor: 1. Open the windows appropriately for ventilation, which helps volatile odors dissipate. 2. Place odor-absorbing materials in the car, such as activated charcoal or bamboo charcoal. 3. Place natural fragrant substances like lemon or orange peels in the car to mask the odor. Six Major Taboos During the New Car Break-in Period: 1. Avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 2. Avoid overloading: Running a new car at full load during the break-in period can damage the components. Therefore, within the first 1,000 kilometers, the load should generally not exceed 75%-80% of the rated capacity. 3. Avoid long-distance trips: Driving long distances during the break-in period increases the continuous working time of the engine, which can easily lead to component wear. 4. Avoid high-speed driving: There are speed limits during the new car break-in period. Generally, the speed should be kept below 100 km/h. When the throttle is fully open, the speed should not exceed 80% of the maximum speed. Also, monitor the engine RPM and speedometer to ensure the engine operates at medium speed. Typically, the engine RPM during the break-in period should be between 2,000-4,000 rpm. 5. Avoid changing the oil too early: The initial oil in a new car is specially formulated for the break-in period, with low viscosity, excellent heat dissipation, cleaning, and antioxidant properties. Some manufacturers even add grinding agents to aid the break-in process. Therefore, only change the oil as specified by the manufacturer and avoid doing so prematurely. 6. Avoid starting without warming up: Always warm up a new car before driving. Warming up allows sufficient lubrication time for the engine, especially for turbocharged models, which require at least one minute of warm-up before driving.

10

1

Share

How to Read Tire Tread Specifications?

Tire tread model numbers can be found on the sidewall of the tire, such as the digits 225/55R18-103V-TR257. Here, 225 represents the tread width, 55 is the sidewall height, R stands for radial tire, 18 indicates the rim size, 103 is the load index, V denotes the speed rating, and TR257 refers to the tread pattern. Generally, tire treads consist of various longitudinal, lateral, and diagonal grooves on the tire surface. More details are as follows: 1. Longitudinal tread patterns, characterized by continuous grooves, primarily serve the function of draining water in wet conditions and aid in heat dissipation, but they lack sufficient grip. Lateral tread patterns, on the other hand, provide stronger traction, compensating for the inherent weakness of longitudinal patterns. 2. The longitudinal grooves on tires mainly facilitate rapid water drainage but result in reduced traction. Conversely, lateral grooves offer superior grip but have poor water drainage and directional stability. This led to the development of hybrid tread patterns, combining the quick-draining longitudinal grooves in the center with the high-traction lateral grooves on the shoulders for optimal performance.

4

2

Share

Can Car Electronic Lock Keys Be Duplicated?

Car electronic lock keys can be duplicated, and new keys can be configured at a 4S shop. The solutions for lost car electronic lock keys are as follows: Configure a new key at a 4S shop: You can seek a professional locksmith company to unlock the car and then go to a 4S shop to configure a new key. Relevant proof documents are required, such as ID card and vehicle license. If you don't have the vehicle license, you need to file a report at the local police station. Once the car key is lost, even if a new key has been configured, it is still important not to store valuables in the car. Find a spare key: When a new car leaves the factory, it usually comes with 2 to 3 keys. Each new car has a pre-configured key anti-theft code. If only one key is provided, the 4S shop can query the key anti-theft code from the database based on the vehicle license and the owner's ID card provided by the owner. After obtaining this code, the 4S shop will require the owner to provide the key tooth shape number to configure a new metal key.

9

3

Share

Are the Highlander 7-seater and 5-seater the same size?

Can Radiator Coolant and Antifreeze Be Mixed?

How to Interpret the P0700 Trouble Code?

How to Activate One-Touch Window Roll-Up with Key for Buick Excelle?

How to Remove New Car Odor?

How to Read Tire Tread Specifications?

Can Car Electronic Lock Keys Be Duplicated?

What to Do If the Audi A6L 2.4 Has Severe Oil Burning Issues?

Should the Civic's AC be set to ON or OFF for cooling?

Which country is Jaguar from

Can a spare tire be used on the highway?