Are the exterior dimensions of the Great Wall Haval H3 and H5 the same?

What are the warning lights on the car dashboard?

Car dashboard warning lights include: engine oil warning light, coolant temperature warning light, tire pressure warning light, battery warning light, and electronic stability control (ESC) indicator. The engine oil warning light often indicates low oil level, which is relatively simple to address by adding oil, and car owners can handle it themselves. The coolant temperature warning light typically signals overheating. When the coolant temperature in the radiator reaches 100°C while driving, this light will illuminate. If the tire pressure warning light comes on, it's important to determine whether the pressure is too high or too low. Excessive pressure can lead to tire blowouts while driving, so the tire pressure should be reduced. The battery indicator displays the working status of the car battery and is usually red or yellow in color. When turning the key for a self-check, this light will turn on and should automatically turn off after starting the car. The ESC indicator shows the working status of the electronic stability control system and is typically yellow. Normally, this light is off. If it stays on, it may indicate that the ESC system has been turned off, usually due to accidental operation by the driver.

2

5

Share

How Does a Tire Pressure Monitoring System Work?

Tire pressure monitoring systems operate differently based on their monitoring methods: 1. Direct TPMS: Uses pressure sensors installed inside the tires to measure air pressure, transmitting pressure data wirelessly from within the tire to a central receiver module; 2. Indirect TPMS: When tire pressure decreases, the vehicle's weight causes the rolling radius of that wheel to reduce, monitoring tire pressure by comparing rotational speed differences between tires. The functions of tire pressure monitoring are: 1. Preventing accidents; 2. Extending tire service life; 3. Reducing wear on the suspension system.

20

1

Share

How Long Does the License Plate Registration Process Take?

The license plate registration process takes 2 working days. The required documents include: 1. Original and photocopy of ID card (if applying on behalf of someone else, both the applicant's and the car owner's IDs are required); 2. Original and photocopy of the invoice; 3. Original and photocopy of the vehicle qualification certificate; 4. Original and photocopy of the compulsory insurance policy; 5. Copy of the tax payment certificate. The registration process is as follows: 1. Photo taking: Place the number plate set according to the last four digits of the chassis number in the lower right corner of the windshield and take a photo of the car. Before taking the photo, remove the CCC sticker and the fuel consumption label from the windshield; 2. Rubbing; 3. Inspection line test (checking power, lights, exhaust, and brakes); 4. Criminal investigation; 5. Submission of documents; 6. Vehicle inspection; 7. Number selection; 8. Purchase of vehicle and vessel tax; 9. License plate installation.

15

1

Share

How to Reset the Maintenance Light on the Fengjun 6?

The method to reset the maintenance light on the Fengjun 6 is: 1. Turn off the key, press and hold the 0.0 button, then turn on the ignition to power the car; 2. Release the 0.0 button, then press the 0.0 button again to reset the maintenance light. Taking the 2017 Fengjun 6 as an example, its body dimensions are: length 5385mm, width 1800mm, height 1760mm, wheelbase 3200mm, and minimum ground clearance 188mm. The 2017 Fengjun 6 is equipped with a 2.0T turbocharged engine, with a maximum power of 95kW and a maximum torque of 315Nm, matched with a 6-speed manual transmission.

6

5

Share

Is the Q7 four-wheel drive?

The Q7 is four-wheel drive, featuring a full-time four-wheel drive system. A full-time four-wheel drive system means that the vehicle is always driven by all four wheels independently at any time during operation. The Q7's body dimensions are: length 5067mm, width 1970mm, height 1731mm, with a wheelbase of 2996mm and a fuel tank capacity of 85 liters. The Q7 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 180kW at 5000 to 6500 rpm, and a maximum torque of 370Nm. It is paired with an 8-speed automatic transmission. The front and rear suspension types are multi-link independent suspensions.

1

4

Share

How to Drive a Nissan Sylphy with Automatic Transmission?

To drive a Nissan Sylphy with automatic transmission, follow these steps: depress the brake to start the engine, shift to D gear to move forward, use R gear for reversing, and shift to P gear when parking. The Nissan Sylphy has the following dimensions: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, minimum ground clearance 166mm, fuel tank capacity 50L, and trunk capacity 510L. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.

18

4

Share

Are the exterior dimensions of the Great Wall Haval H3 and H5 the same?

What are the warning lights on the car dashboard?

How Does a Tire Pressure Monitoring System Work?

How Long Does the License Plate Registration Process Take?

How to Reset the Maintenance Light on the Fengjun 6?

Is the Q7 four-wheel drive?

How to Drive a Nissan Sylphy with Automatic Transmission?

Can a Naturally Aspirated Engine Be Modified into a Turbocharged One?

What are the tips for self-selecting license plate numbers on Traffic Management 12123?

Why is the ABS light always on?

Can a Child Be Held in the Front Passenger Seat?