···
Log in / Register

Are the dimensions of the G350 and G63 the same?

4 Answers
VonEmery
09/06/25 5:33am

G350 and G63 have different dimensions. In terms of appearance: The G350 is the standard G-Class, featuring a horizontal grille design, while the G63 is an AMG model with numerous AMG badges and a vertical grille design. In terms of performance: The Mercedes-Benz G350 is equipped with a 2.0T engine, delivering a maximum horsepower of 258 HP and a peak torque of 370 Nm, with a 0-100 km/h acceleration time of 8.1 seconds. The G63, on the other hand, features a 4.0T V8 engine paired with a 9-speed automatic transmission, producing a maximum horsepower of 585 HP and a peak torque of 850 Nm, achieving a 0-100 km/h acceleration in just 4.5 seconds. Mercedes-Benz tire dimensions: The G350 measures 486619311968, while the G63 measures 485719311962.

Was this review help?
9
4
Share
LeilaniLynn
09/18/25 5:24am

I often follow updates on the Mercedes-Benz G-Class. According to official data, the G350 and G63 share identical exterior dimensions, including a length of approximately 4.8 meters, a width close to 2 meters, and a height of around 1.9 meters, as they are built on the same basic body structure. This means whichever model you choose, it will occupy the same garage space—not an inch more. Of course, as the AMG high-performance variant, the G63 might have more pronounced wheel arches or larger wheels, but these are merely visual differences that don't affect the actual size. The interior space is also identical, with no changes in legroom or trunk capacity, fully meeting everyday family needs. In summary, there's no need to worry about dimensional differences—just choose based on your budget. The G63 excels in engine performance but maintains nearly the same exterior. I've checked the specs and even compared with a friend's car, and the dimensions truly show no variation.

Was this review help?
18
3
Share
Expand All
McKathryn
11/01/25 5:49am

As someone who has driven a Mercedes-Benz G-Class for many years, I can confidently say that the dimensions of the G350 and G63 are absolutely identical. Whether parked on the roadside or entering an underground garage, their length, width, and height are the same, all within standard measurements. The interior seating space feels identical when you sit inside, and the trunk has no issues accommodating luggage. Although the G63 comes with AMG styling that makes it look more aggressive, the overall dimensions remain unchanged—it only affects the visual appearance. I hesitated about this when choosing a car, but ultimately found that size isn't a concern; performance is the only difference. Parking fees or residential height restrictions apply equally, so there's no need to worry. When selecting a car, focusing on power and cost is more important—there's truly no difference in size between the two.

Was this review help?
15
5
Share
Expand All
DiCorey
12/15/25 5:58am

After years of driving, I feel the Mercedes-Benz G350 and G63 have identical dimensions. Whether it's daily parking or highway driving, they occupy the same space, both approximately 4.8 meters in length, with matching width and height, ensuring no impact on safety. The interior is spacious and suitable for passengers, with the G63 not being any larger, and the trunk capacity is exactly the same. The AMG design only differs in exterior details, without altering the core dimensions. Don't worry about this when choosing a car; comfort while driving is what matters most.

Was this review help?
10
4
Share
Expand All
More Forum Discussions

What is the horsepower of the Geely Boyue?

Geely Boyue has a maximum horsepower of 163ps. Taking the 2021 Geely Boyue as an example, it is a 5-door, 5-seater compact SUV with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, fuel tank capacity 58l, and curb weight 1575kg. The 2021 Geely Boyue is equipped with a 1.8t turbocharged engine, with a maximum power of 120kw, maximum power speed of 5500rpm, maximum torque speed ranging from 1500rpm to 4500rpm, and is paired with a 6-speed manual transmission.
3
3
Share

How is a car battery charged?

Car battery charging method is: 1. Open the front cover of the car and take out the battery charger; 2. Connect the positive terminal of the battery to the positive terminal of the power source, and the negative terminal of the battery to the negative terminal of the power source. Methods to check for insufficient car battery power are: 1. The car horn sound becomes weaker; 2. The car struggles to start, indicating battery discharge; 3. The battery fault light turns on. Precautions for car battery charging are: 1. Battery voltage below 10% of the rated voltage will cause battery discharge; 2. Avoid water entering the battery during charging; 3. Connect directly to the battery for charging, avoid removing the battery to prevent data loss.
16
0
Share

What Causes the Rattling Noise When the Atenza Goes Over Bumps?

Atenza's rattling noise when going over bumps is caused by loose component screws. It is necessary to visit a 4S shop to check the loose parts and tighten the screws. Below is a related introduction to the Atenza: 1. Body Dimensions: The Atenza has a body length, width, and height of 4870mm, 1840mm, and 1445mm respectively, with a wheelbase of 2830mm. 2. Powertrain: This car uses two engines, one is a 2.0-liter naturally aspirated engine, and the other is a 2.5-liter naturally aspirated engine; paired with a 6AT transmission. (1) 2.0-liter naturally aspirated engine: The engine has a maximum power of 158 horsepower and a maximum torque of 202 Nm. The engine's maximum power speed is 6400 rpm, and the maximum torque speed is 4000 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block. (2) 2.5-liter naturally aspirated engine: The engine has a maximum power of 192 horsepower and a maximum torque of 252 Nm. The engine's maximum power speed is 6100 rpm, and the maximum torque speed is 3250 rpm. This engine is equipped with a variable valve timing control system and direct fuel injection technology, and uses an aluminum alloy cylinder head and block.
8
0
Share

When should the original timing belt be replaced?

The original timing belt should be replaced when the vehicle reaches 80,000 kilometers. The functions of the timing belt are: 1. To drive the engine's valve train, ensuring the intake and exhaust valves open and close at the correct times; 2. To guarantee the engine cylinders can properly intake and exhaust air. The replacement procedure for the timing belt is: 1. Remove the valve cover and the timing belt housing; 2. Rotate the crankshaft to position the first cylinder at top dead center, then secure the crankshaft with the fixing bolt; 3. Rotate the intake and exhaust camshafts—there are grooves at the rear of the camshafts—align the grooves of both camshafts horizontally; 4. Remove the old belt and install the new one; 5. Ensure there is no gap at the crankshaft position sensor during installation to avoid triggering fault codes.
20
1
Share

How to Install a Belt?

The method for installing a belt is as follows: 1. Align the ignition marks of the crankshaft and camshaft; 2. Place the belt on the crankshaft pulley and smoothly guide it upwards from the side opposite the tensioner pulley to place it on the camshaft pulley; 3. Then fold the belt into the side of the tensioner pulley and tighten the tensioner. The belt is an important component of the engine's valve timing system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and matching a specific transmission ratio. Steps for replacing the belt: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, the generator belt will be visible; 4. Remove the exposed old generator belt; 5. Install the new engine belt. Situations requiring belt replacement: 1. Abnormal belt wear; 2. Belt folding failure; 3. Belt impact load.
14
0
Share

How to Disassemble the Wuling Hongguang Key?

The method to disassemble the Wuling Hongguang key is: 1. Use a flathead screwdriver to pry open the side opening of the key; 2. Open the key casing along the pried gap. Taking the 2019 Wuling Hongguang S3 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4655mm, width 1735mm, height 1790mm, a wheelbase of 2800mm, a fuel tank capacity of 49 liters, and a curb weight of 1380kg. The 2019 Wuling Hongguang S3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, a maximum power of 73kW, a maximum torque of 140Nm, and is paired with a 6-speed manual transmission.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.