···
Log in / Register

Are the Cameras at Road Construction Intersections Still Operational?

3 Answers
LiamMarie
07/29/25 6:55pm
Cameras at road construction intersections are not operational. However, traffic laws should still be observed at these intersections, and running red lights is prohibited. If a vehicle is fined for driving in the wrong direction due to road construction, the driver can appeal to the traffic management department. Driving on the left side of the road, whether by motor vehicles or non-motor vehicles, is considered driving in the wrong direction. Fines and penalty points for driving in the wrong direction due to road construction can be appealed. Road Surveillance Cameras: Road surveillance primarily uses PTZ (pan-tilt-zoom) cameras, which are installed at intersections and key road sections with heavy traffic and pedestrian flow. These cameras transmit real-time traffic conditions to the road surveillance command center via image transmission channels. Center operators can monitor road conditions in various areas and adjust traffic flow at intersections to ensure smooth traffic. The cameras help promptly detect and handle traffic violations and accidents, and provide technical support for solving cases related to traffic and public security, significantly enhancing the efficiency and effectiveness of law enforcement by public security authorities.
Was this review help?
10
4
Share
GideonMarie
08/14/25 12:43pm
I often drive in the city, and during road construction, the intersection cameras are usually still on. Those things are used by the traffic department to monitor traffic, and safety is even more crucial during construction to prevent reckless driving. I remember last time I passed a construction intersection, I clearly saw the camera light was still on, capturing speeding cars, and a few days later, I received a ticket. Road construction won’t just turn off the equipment unless they’re under maintenance or there’s a safety hazard. As a driver, I suggest not taking chances—stick to the speed limit, use a navigation system, or download a traffic app to check for real-time updates. Road construction is already annoying enough, but the cameras being on are for everyone’s safety, reminding us to slow down in narrow lanes and yield to workers.
Was this review help?
12
2
Share
Expand All
McCassandra
10/15/25 2:12am
I think most road construction intersection cameras are still operational. They're smart devices that automatically capture violations. I often follow such news - cameras in work zones have higher activation rates due to greater accident risks. Previously I read reports that some cities even install temporary cameras during construction to monitor vehicles. From daily driving experience, if you see the camera light flashing, it means it's working; if not lit, it might be malfunctioning or turned off, but that's rare. As an experienced driver, I always carry a dashcam and drive slower in construction zones, avoiding lane crossing or improper lane changes. With technological advances, mobile maps can now alert about camera status too - staying vigilant helps avoid tickets.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Does the car key have basic waterproof functionality?

Car keys do not have basic waterproof functionality. Here are some precautions for using car keys: 1. Do not place car keys together with mobile phones, as the magnetic field interference from phones may prevent the car key from functioning properly. Prolonged exposure to phone frequencies can cause malfunction. 2. Avoid exposing car keys to high-temperature and humid environments for extended periods, and do not leave them under direct sunlight. Additional information: If the car key gets wet, do not press any buttons immediately, as this may allow moisture to penetrate the inner layers. Wipe the surface dry, open the casing, remove the battery, and use highly absorbent paper towels or high-concentration alcohol to clean the internal button contacts and other parts. Use a cold air setting on a hairdryer to dry the key—do not use hot air, as the internal circuit board should not be exposed to excessive heat.
4
2
Share

How long does it take to drive a little over 10 kilometers?

Driving time depends on the speed. Generally, the speed in urban areas is 30-50 km/h, taking about 10 minutes. Here are the relevant details: Introduction: The time it takes to drive 10 kilometers depends on factors such as the car's speed, model, and traffic conditions. Generally, the speed of an economy car is 60-80 km/h, covering a 12-kilometer distance in about 10 minutes, assuming no traffic lights or congestion. In normal urban traffic conditions, it may take 20-30 minutes due to traffic lights. During peak hours with heavy traffic, it could take even longer. Important Notes: Driving time depends on the speed. Generally, the speed in urban areas is 30-50 km/h, taking about 10 minutes. At a speed of 15-20 km/h, it may take 40 minutes, while at 30 km/h, it could take around 20 minutes.
3
3
Share

How to Activate Cruise Control on Volkswagen Sagitar?

The method to activate cruise control on the Sagitar is as follows: The control switch is located on the left stalk of the steering column. When the vehicle is stationary or in motion, turn the cruise switch from OFF to ON. At this time, a green cruise control icon will appear on the speedometer, indicating that the cruise function is activated. Press the SET area of the button to control the vehicle speed. Precautions for using cruise control on the Volkswagen Sagitar: 1. Pressing the brake will deactivate cruise control. The speed value will not be cleared, and you can resume the previously set speed to continue cruising. 2. In complex road conditions or under the influence of weather, activating cruise control may be dangerous. Please turn off cruise control and drive manually. 3. On downhill sections, the vehicle may coast faster. At this time, you should press the brake to control the speed to prevent accidents caused by loss of control.
19
2
Share

Where is the fuel pump relay located on the 09 Jianghuai Refine?

Jianghuai Refine's fuel pump relay is located on the right side of the driver's position. Here are the detailed relevant information: Introduction: The fuel pump relay of Jianghuai Refine is located on the right side of the driver's position. After removing the storage box, it can be found in the fuse box inside the engine compartment, at the upper right corner. There is a pillar in the front right, entirely made of metal, which serves as both the main engine relay and the fuel pump relay, connected together. Precautions: The main function of the fuel pump relay is to automatically close the contacts when the car reaches the specified oil pressure. This serves as a signal of normal oil pressure, sent to CNC, PLC, etc., as a condition for allowing the device to start.
9
5
Share

How to Identify the Manufacturing Year of a Car?

Methods to check the manufacturing year of a car: 1. Check the nameplate in the engine compartment. Inside the engine compartment, there is usually an aluminum nameplate that displays the car's serial number, engine displacement, model, brand, and importantly, the specific manufacturing date. When examining the nameplate, note that all the information is stamped once and cannot be altered unless the entire nameplate is replaced. If the manufacturing date appears skewed or blurred, it may indicate tampering, and such cars should not be purchased. 2. Look for the small nameplate around the door seams. There is also a small nameplate around the driver's or passenger's door seam, which clearly states the car's brand, model, manufacturing date, etc. Verify the manufacturing date and cross-check it with the nameplate in the engine compartment to ensure accuracy. 3. Check the VIN (Vehicle Identification Number) under the windshield. Most cars have a VIN under the front windshield, and the 10th digit of the VIN indicates the manufacturing year. Each car's VIN is unique, but the manufacturing date can always be found within it.
5
3
Share

Will changing lanes over a solid line on an elevated road definitely be captured by cameras?

It will be captured by cameras. Here are the specific details of relevant information: Introduction: Driving a motor vehicle in violation of prohibitory signs or markings; 3 points will be deducted. The content regarding school bus driver management in the latest traffic regulations takes effect from the date of issuance, while other provisions will be officially implemented from January 1, 2013. The new traffic rules increase the penalties for violations, and the number of point-deductible offenses has risen from 38 to 52. Other violations related to crossing lines: Both single and double solid yellow lines are prohibitory markings. Crossing or driving over these lines during travel constitutes a violation. Failing to drive in the corresponding lane as indicated by the guiding markings at intersections also falls under the aforementioned provisions.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.