Are the bumpers replaced at 4S stores original?

1 Answers
DeKing
07/30/25 7:38am
In 4S stores, the bumpers replaced are original. Here is some information about bumpers: 1. Introduction: The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. With the development of the automotive industry and the extensive application of engineering plastics in the automotive sector, car bumpers, as an important safety device, have also embarked on a path of innovation. 2. Composition: Generally, a car bumper consists of three parts: the outer panel, cushioning material, and crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets into a U-shaped channel; the outer panel and cushioning material are attached to the crossbeam. 3. Safety: In the event of a collision, the bumper can act as a cushion, protecting the front and rear body of the car.
Was this review help?
11
3
Share
More Forum Discussions

Why does the STOP light suddenly illuminate on a Citroen C-Quatre?

It indicates that the Citroen C-Quatre's braking system is low on brake fluid. Here is an introduction to brake fluid: 1. Overview: There are three types of brake fluid. When purchasing, choose a reliable manufacturer, and the higher the grade, the better. Its braking working pressure is generally 2MPa, and can reach up to 4~5MPa. All liquids have the characteristic of being incompressible. In a sealed container or a pipeline filled with liquid, when the liquid is under pressure, it quickly and evenly transmits the pressure to all parts of the liquid. Hydraulic braking works on this principle. 2. Performance requirements: Good viscosity-temperature characteristics, low freezing point, and good low-temperature fluidity; high boiling point, no vapor lock at high temperatures; minimal quality changes during use, and it should not cause corrosion or deterioration of metal and rubber components.
14
3
Share

Introduction to the History of Wuling

The following is an introduction to the history of Wuling: 1. Overview: The Wuling automobile brand was born in 1985, embodying the spirit of "hard work and self-improvement," and has now become one of the most valuable brands in China's automotive industry. 2. Journey: SAIC-GM-Wuling Automobile Co., Ltd., officially established on November 18, 2002, is a large Sino-foreign joint venture automobile company jointly formed by SAIC Motor Corporation Limited, General Motors (China) Company, and Liuzhou Wuling Automobile Co., Ltd. Its origins can be traced back to the Liuzhou Power Machinery Factory established in 1958. Over the years of the joint venture, the company has continuously expanded in scale and achieved sustained growth in production and sales, developing into an international and modern manufacturer of micro and small vehicles. Wuling is a registered trademark and brand of Liuzhou Wuling Automobile Co., Ltd., and this logo has been fully authorized for use by SAIC-GM-Wuling.
17
3
Share

How to Connect Bluetooth in Magotan?

Method to connect Bluetooth in Magotan: 1. Open the settings function on your phone; 2. After entering the settings page, click the "Bluetooth" button to access the phone's Bluetooth management page; 3. Once in the "Bluetooth" page, turn on the switch button on the right side of Bluetooth; 4. Enable the open detection function in Bluetooth settings, otherwise, it will not be able to connect to Magotan's Bluetooth; 5. Turn on the Magotan's car Bluetooth; 6. After the phone scans the car Bluetooth, click to connect the corresponding car Bluetooth device; 7. When the phone displays "Connected", the Bluetooth connection is successful. Magotan is a car under the Volkswagen brand, with a body length, width, and height of 4866mm, 1832mm, and 1464mm respectively, and a wheelbase of 2812mm. In terms of appearance, the Magotan features a resolute V-shaped front face that exudes stability and grandeur, along with dynamic and stylish streamlined body lines, achieving a drag coefficient as low as 0.28.
9
3
Share

What Causes the Abnormal Noise When the Sylphy's Air Conditioner is Turned On?

Possible causes include slippage of the air conditioning compressor clutch or a malfunctioning blower. Below are the four cyclic processes of a car's air conditioning system: 1. Compression Process: The compressor inhales low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas, which is then discharged from the compressor. 2. Heat Dissipation Process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser, where, due to the decrease in pressure and temperature, the refrigerant gas condenses into a liquid, releasing a significant amount of heat. 3. Throttling Process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, increasing in volume while experiencing a sharp drop in pressure and temperature, exiting the expansion device as a mist (fine droplets). 4. Heat Absorption Process: The mist-like refrigerant liquid enters the evaporator. Since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas. During the evaporation process, it absorbs a large amount of surrounding heat, after which the low-temperature, low-pressure refrigerant vapor re-enters the compressor. These processes repeat continuously to achieve the effect of lowering the temperature of the air around the evaporator.
6
1
Share

Why does the Wuling Zhiguang make abnormal noise when starting and fail to ignite?

Failure to ignite indicates insufficient engine power, which may be caused by the following reasons: 1. Insufficient fuel supply: The fuel system should inject well-atomized fuel into the cylinder at the right time and in the right amount. If there is a fault in the fuel system, the amount of fuel injected into the cylinder is reduced, leading to less heat generated by combustion. When the heat is insufficient to meet the engine load requirements, the engine will lack power. 2. Influence of air intake: The combustion of fuel in the cylinder mainly results from the chemical reaction between carbon atoms in the diesel and oxygen atoms (generating carbon dioxide), which releases heat. If the air intake is insufficient due to a clogged air filter reducing the air flow cross-section (for engines with turbochargers, a faulty turbocharger can also reduce air intake) or issues with the valve train, the carbon atoms in the fuel cannot fully react with oxygen atoms, resulting in reduced heat release and insufficient engine power. 3. Impact of ambient temperature: High ambient temperatures often cause engine overheating. Under the combined effect of high ambient temperature and engine overheating, the air expands, affecting the engine's air intake and reducing engine power. Conversely, when the ambient temperature is too low, it can lead to poor fuel evaporation in the cylinder, causing incomplete combustion, which means the working medium in the cylinder generates less heat.
8
2
Share

Where is the Wuling Hongguang Antifreeze Located?

The antifreeze reservoir of Wuling Hongguang is located on the right side of the engine compartment, and the antifreeze color is blue or red. Antifreeze replacement cycle: For vehicles that run for long periods, such as taxis, etc. Generally, high-quality antifreeze should be replaced once a year, while vehicles with shorter running times can be replaced every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange performance between the antifreeze and engine components, ensure that the product is within its validity period when adding it. Long-lasting antifreeze can have a validity period of up to three years. If suspended matter, sediment, or deterioration/discoloration is found in the antifreeze, it should be replaced promptly, and the system should be cleaned. Precautions for antifreeze replacement: Before completely replacing the antifreeze, conduct a comprehensive inspection to check for any signs of leakage in the pipes or cracks, with a focus on inspecting the five-way water pipe. The five-way pipe is named for its five interfaces connecting various parts, and the antifreeze is distributed to different parts of the car through the five-way pipe to function. If there is any leakage of antifreeze in this part, the water pipe should be replaced or the interface should be re-fixed according to the situation.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.