Are the Audi Q8 and Volkswagen Touareg models based on the same platform?

Should You Fasten the Seat Belt or Adjust the Seat First in Subject 2?

Adjust the seat first, then fasten the seat belt. Below is additional information related to Subject 2: 1. Subject 2 Exam Content: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small cars (C1 and C2), the exam includes five mandatory items: reverse parking, parallel parking, hill start and stop, right-angle turns, and curve driving (commonly known as the S-curve). Some regions also include a sixth item: high-speed toll card collection. Starting from June 1, 2021, the "hill start and stop" item will be removed from the Subject 2 test for small automatic transmission vehicle licenses. 2. Passing Standards: For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 is required; for other vehicle types, a score of 80 is required.

5

1

Share

What are the symptoms of a damaged flywheel?

When the car's flywheel is damaged, it will cause the engine to produce abnormal noises during operation, accompanied by noticeable shaking, and can also lead to an imbalance in the transmission shaft of the gearbox. The car flywheel is a disc-shaped component with a large moment of inertia, functioning like an energy storage device. Since the power strokes of the engine cylinders are not continuous, the engine speed fluctuates. When the engine speed increases, the flywheel's kinetic energy increases, storing energy. When the engine speed decreases, the flywheel's kinetic energy decreases, releasing the stored energy. The flywheel helps reduce speed fluctuations during engine operation. The car flywheel is mounted at the rear end of the engine crankshaft. Through the clutch installed on the flywheel, it connects the engine to the car's transmission system and engages with the starter motor to facilitate engine starting. It also serves as the integration point for the crankshaft position sensor and vehicle speed sensor. Methods to determine flywheel damage: Check if the starter ring gear on the flywheel is intact. If the ring gear shows significant wear at the tooth ends or broken teeth, the starter ring gear or flywheel needs replacement. Inspect the flywheel surface for severe burns, impact marks, or scratches. If such damage is present, the flywheel also requires replacement. Measure the wear depth of the grooves. If it exceeds 0.5mm, the flywheel is damaged and needs replacement.

13

0

Share

Is It Necessary to Buy a Car If You Don't Drive Often?

For ordinary consumers, it is not necessary to buy a car because cars are meant to improve quality of life. If the car is not used frequently after purchase, then there is absolutely no need to buy one. Below are the reasons why buying a car may not be necessary: 1. Not driving for long periods can significantly affect the car: When a vehicle is parked for extended periods, the engine oil can oxidize, which may severely corrode mechanical parts; the car battery inevitably self-discharges when the vehicle is not started, leading not only to severe power loss over time but also shortening the battery's lifespan; prolonged parking can cause the vehicle's oil seals to age and leak; since tires are made of rubber, prolonged pressure on one spot can cause the part in contact with the ground to shrink and deform. If parked under poor conditions, tires may even burst, posing a significant threat to travel safety. 2. The longer the time, the higher the depreciation of the vehicle: Cars are consumable goods, and most vehicles begin to depreciate from the very first day they are driven off the lot.

18

3

Share

How to Remove the Adhesive Residue After Peeling Off the Window Film?

Methods to remove the adhesive residue left after peeling off the car window film are as follows: 1. Cleaning Solution Method: If you have a scraper, you can use it to scrape off the adhesive, being careful not to scratch the car. Alternatively, you can ask a professional at a car detailing shop to help remove it. Then, purchase some cleaning solution and repeatedly clean the area with it. For stubborn residue, scrape it off with the scraper and then use the cleaning solution again. 2. Vinegar Method: Apply vinegar evenly on the adhesive with a cotton swab. Through the glass, you can see the vinegar slowly spreading between the glass and the adhesive. Then, use the cotton swab to scrape back and forth on the adhesive. Soon, the adhesive will start to peel off in pieces, leaving very little residue on the glass. A quick wipe with a paper towel will make it look as good as new. 3. Essential Balm Method: Initially, there is no obvious reaction when the essential balm comes into contact with the adhesive. Persistently apply the essential balm to the adhesive and then scrape it with a cotton swab. Gradually, the adhesive will soften, and some of it will be scraped off. Continue applying and scraping, and the reaction between the two will speed up. In about 2 minutes, a piece of adhesive will be completely removed.

12

1

Share

What Causes the Brake Caliper to Make Abnormal Noises?

Abnormal noises from the brake caliper may be caused by loosening or rusting of the guide pins. Replacing and lubricating them with grease can resolve the issue. It could also be the sound of the brake pads hitting the caliper. Additionally, if there are foreign objects between the caliper and the brake disc, abnormal noises may occur. It is best to diagnose the specific cause at a repair shop. Below is an extended introduction: 1. Brake Caliper Concept: The brake system consists of a master cylinder and brake calipers. Simply put, the master cylinder stores brake fluid and has inlet and outlet ports. When the brake pedal is pressed, the brake fluid flows from the master cylinder through the pipelines to the brake calipers. When the calipers are pressurized, they push the brake pads to frictionally engage the brake drum, thereby achieving braking. 2. Symptoms of a Faulty Brake Caliper: 1) Oil leakage at the connection between the caliper and the oil pipe, and the brake pedal feels soft when pressed; 2) After pressing the brake pedal, the steering wheel noticeably pulls to one side, which is likely caused by uneven brake pad wear or a faulty caliper; 3) After pressing the brake pedal, the pedal does not rise and lacks resistance, commonly known as the brake not returning to position.

9

0

Share

What engine is equipped in the Hongqi H5?

The Hongqi H5 is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 169 hp, a maximum power output of 124 kW, and a peak torque of 258 N·m. It features direct fuel injection, with an aluminum alloy cylinder head and a cast iron cylinder block. The Hongqi H5 has exterior dimensions of 4945mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 4875mm. It is a 4-door, 5-seater sedan with front-wheel drive. The front suspension is a MacPherson strut independent suspension, while the rear suspension is a multi-link independent suspension.

17

0

Share

Are the Audi Q8 and Volkswagen Touareg models based on the same platform?

Should You Fasten the Seat Belt or Adjust the Seat First in Subject 2?

What are the symptoms of a damaged flywheel?

Is It Necessary to Buy a Car If You Don't Drive Often?

How to Remove the Adhesive Residue After Peeling Off the Window Film?

What Causes the Brake Caliper to Make Abnormal Noises?

What engine is equipped in the Hongqi H5?

What is the top speed of the Kawasaki Z900?

What Causes a Car's Handbrake to Fail?

What Causes Water Under the Car Carpet?

Why Are the Wheels Not Turning?