Are the Audi A4 and Passat in the same class?

2 Answers
MarianaFitz
07/29/25 7:28am
The Passat is a C-segment car, while the A4 is a B-segment car, so they are not in the same class. Below are the differences between the two: 1. Basic Information: The Passat is a mid-size sedan under the Volkswagen brand, with the latest top model being the 2021 380TSI Flagship Edition. The Audi A4 is a mid-size sedan under the Audi brand, with the latest top model being the 2022 40TFSI Luxury Elegance Edition. In terms of price, the official price of the Passat's top model is higher than that of the Audi A4's top model. 2. Body Data: The latest top model of the Passat has a body length, width, and height of 4933(mm) x 1836(mm) x 1469(mm), with a wheelbase of 2871(mm). The latest top model of the Audi A4 has a body length, width, and height of 4851(mm) x 1847(mm) x 1439(mm), with a wheelbase of 2908(mm). Overall, the Passat's top model is longer than the Audi A4's top model, but the Passat's wheelbase is shorter than that of the Audi A4. 3. Power Comparison: The Passat is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 220Ps, maximum power of 162kW, and maximum torque of 350N·m, paired with a 7-speed dual-clutch transmission. The Audi A4 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190Ps, maximum power of 140kW, and maximum torque of 320N·m, paired with a 7-speed dual-clutch transmission. In terms of power output, the Passat's top model is more powerful than the Audi A4's top model.
Was this review help?
19
5
Share
DiRonan
08/12/25 10:46am
I usually pay close attention to cars, especially mid-size sedans. Although the Audi A4 and Passat both belong to the mid-size category, they are not on the same level. Audi is a luxury brand, with a starting price of around 300,000 RMB, featuring leather and premium materials in the interior, and the driving experience is exceptionally stable. As for the Passat, it belongs to the entry-level series of the Volkswagen brand, priced at just over 200,000 RMB, with more practical configurations, such as ample space but lower-grade materials. In terms of positioning, the A4 is more suitable for business professionals who pursue quality, while the Passat is the preferred choice for ordinary families. Maintenance costs also differ—an oil change for the A4 might cost over a thousand RMB, whereas the Passat can be serviced for five or six hundred. If you're planning to buy a new car, I’d recommend choosing based on your budget; if the budget allows, go for the A4, but if you want to save money and prioritize practicality, the Passat is a great option.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What are the detailed steps for the C2 Subject 2 driving test?

According to the scheduled test time for Subject 2, the instructor will take the candidate to the test site in advance. After entering the test site, swipe your ID card for identity verification to enter the waiting area. The candidate's name and test car number will appear on the electronic screen, then wait for the call. After hearing the call, enter the test area and find your assigned test car. Hand your ID card to the examiner for verification and facial recognition. Once completed, begin the pre-start preparations. After preparations are complete, inform the examiner to start the assessment. Perform the following tasks in order: reverse parking—parallel parking—curve driving—right-angle turn—slope fixed-point parking. If you fail the first attempt, drive back to the starting point and begin the second assessment. If you pass the test, return to the waiting area to sign and confirm your score, then leave.
11
2
Share

Where is the oil filter located on the BMW 120i?

The oil filter on the BMW 120i is located at the front lower side of the engine in the front of the car. Function of the oil filter: The oil filter, also known as the oil filter element, is designed to remove impurities, sludge, and moisture from the engine oil, delivering clean oil to all lubrication points. Engine oil inherently contains a certain amount of sludge, impurities, moisture, and additives. During engine operation, metal particles, airborne contaminants, and oil oxidation byproducts increase the level of impurities in the oil. If unfiltered oil enters the lubrication circuit, these impurities can reach the friction surfaces of moving parts, accelerating wear and reducing the engine's lifespan. Oil filter grades: Due to the high viscosity of engine oil and the elevated level of contaminants, oil filters generally consist of three stages to enhance filtration efficiency: the oil suction filter, the primary oil filter, and the secondary oil filter.
11
3
Share

How to Choose the Right Gasoline Grade?

Different grades of gasoline contain varying percentages of isooctane, and the higher the isooctane value, the greater the anti-knock performance. Different vehicle manufacturers recommend different gasoline grades, and the engine compression ratios also vary. It's essential to understand these details thoroughly to make an informed decision. According to the gasoline model specified by the car manufacturer, using only that grade of gasoline ensures optimal fuel utilization and maximizes performance. For compression ratios of 7.5~8.0, use 90~93 octane gasoline; for 8.0~8.5, use 90~93 octane; and for 8.5~9.0, choose 93~95 octane.
3
5
Share

Can You Brake During Straight-Line Driving in Subject 3?

Braking is not allowed during straight-line driving in Subject 3. Below are the scoring standards for straight-line driving in Subject 3: 1. Failure to maintain straight-line driving: Inability to keep the vehicle moving straight due to unstable steering control results in disqualification; 2. No action taken when the vehicle ahead brakes: Failure to promptly decelerate when the vehicle ahead brakes results in disqualification; 3. Not observing traffic conditions: Not timely observing the rear traffic conditions through the interior and exterior rearview mirrors deducts 10 points; 4. Failure to detect obstacles: Not promptly detecting road obstacles or not taking timely deceleration measures upon detecting road obstacles deducts 10 points.
9
4
Share

Is Simulation Mandatory for Subject 3?

Subject 3 simulation is not mandatory, as pre-exam simulation is a voluntary activity. Below are the assessment criteria for failing Subject 3: 1. Vehicle Preparation: Failure to walk around the vehicle to inspect its exterior and safety conditions results in failure; Not observing rear traffic before opening the door leads to failure. 2. Starting Off: Starting with insufficient brake pressure results in failure; Starting with the door not fully closed leads to failure; Before starting, not checking left and rear traffic via mirrors and turning the head left results in failure. 3. Straight Driving: Inability to maintain steady direction control and straight vehicle movement leads to failure; Not slowing down when the vehicle ahead brakes results in failure. 4. Lane Changing: Not observing rear traffic via side and rearview mirrors before changing lanes leads to failure; Improper judgment of safe distance during lane changes, hindering other vehicles, results in failure; Changing more than two lanes consecutively leads to failure.
10
4
Share

How long after the subject two test can you apply for the subject three test?

You can apply for the subject three test 10-20 days after the subject two test. Below is the expanded content for subject two: 1. Basic test items: stake test, slope parking and starting, parallel parking, passing a single-plank bridge, curve driving, right-angle turn, speed-limited passing through a narrow gate, passing continuous obstacles, hundred-meter gear shifting, and bumpy road driving. 2. Test vehicle types: For large buses, tractors, city buses, medium buses, and large trucks, no fewer than 6 test items are required for the driving license test. 3. Teaching objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently master the basic methods of driving in confined spaces and on-site roads, possess the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and accurately control the vehicle's driving position, speed, and route.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.