Are SUVs More Fuel-Consuming?

Will early signaling result in point deduction in Subject 3?

Early signaling in Subject 3 will result in point deduction. The methods for using turn signals are as follows: 1. Left turn signal: used for turning left, changing lanes to the left, starting off, leaving parking spots, and making U-turns. 2. Right turn signal: used for turning right, changing lanes to the right, and pulling over to park. 3. During night driving, use low beams; when visibility is poor, high beams may be used. When overtaking at night, alternate between high and low beams. Use parking lights and tail lights when temporarily parked, and use fog lights and hazard lights in foggy conditions. The usage of turn signals in the Subject 3 test is as follows: 1. Starting off, turning, changing lanes, overtaking, or parking without signaling for at least 3 seconds will result in a 100-point deduction and failure. 2. Failing to use or incorrectly using turn signals before starting off, turning, changing lanes, overtaking, or parking will result in a 100-point deduction and failure. 3. Failing to activate the left turn signal before making a U-turn will result in a 100-point deduction and failure.

6

4

Share

What are the effects of a damaged ambient temperature sensor?

Different automotive temperature sensors can cause various impacts when damaged. The following sections explain: 1. Intake Air Temperature Sensor: If the intake air temperature sensor malfunctions or is damaged, the engine will not be able to accurately calculate the fuel injection amount, resulting in either too rich or too lean air-fuel mixtures. This can lead to difficulties in starting, unstable idling, shaking, or black smoke emissions, affecting the engine's performance. 2. Coolant Temperature Sensor: If the coolant temperature sensor malfunctions or is damaged, the engine will not be able to regulate the water temperature promptly, leading to insufficient cooling. This may cause overheating, cylinder scuffing, difficulties in starting when cold, unstable idling, shaking, poor acceleration, and when the engine is hot, the engine warning light may stay on, and the cooling fan may stop working.

10

5

Share

What are the signs of aging in a car's control arm bushings?

The manifestations of aging in a car's control arm bushings are as follows: decreased handling and comfort, reduced safety performance, abnormal noises, inaccurate alignment parameters, vehicle deviation, and wear or damage to other components (such as tire wear), affecting steering and even leading to malfunctioning performance. The precautions for using car control arms are as follows: 1. Shock absorption: The function of the control arm is to absorb vibrations during driving, with shock absorbers used in conjunction to provide cushioning. 2. Materials: Control arm materials are quite diverse, including aluminum alloy, cast iron, double-layer stamped parts, and single-layer stamped parts, each with its own advantages and disadvantages. Stamped parts have good toughness but insufficient strength, making them prone to fracture upon impact. 3. Rust prevention: It is generally easy to check for rust on the lower control arm, as it is located at the connection point between the front wheel tire and the car's central body. If rust is detected, it must be addressed promptly at a 4S shop to prevent unexpected breakage.

3

Share

At What RPM Should You Shift Gears in a Car?

For most common vehicles, it's appropriate to shift gears between 2000-3000 RPM. However, shifting from first to second gear usually occurs at a slightly lower range, around 2000 RPM or just above. Some vehicles are equipped with low-RPM engines that can deliver significant torque and power at lower revolutions. For such engines, shifting around 2000 RPM or even between 1500-1800 RPM is acceptable. Here are some considerations for downshifting: 1. Generally, when decelerating and needing to accelerate again, you should select the appropriate gear based on your current speed. 2. Use 4th gear when speed drops to 40-50 km/h. 3. Use 3rd gear when speed drops to 30-40 km/h. 4. Use 2nd gear when speed drops to 10-30 km/h. 5. Use 1st gear when speed drops to 0-10 km/h.

13

0

Share

How to Eliminate Odors Inside the Car?

Methods to eliminate odors inside the car are as follows: 1. Open windows for ventilation. This is the most convenient method. Drive with the windows open to allow air exchange between the inside and outside of the car, helping odors to dissipate. 2. Use fruit peels to remove odors. Place orange peels, grapefruit peels, or other fruit peels in the corners of the car to fill it with a fruity fragrance. 3. Use a car air purifier. Car air purifiers are specifically designed to clean the air inside the car and remove odors. Turning on the purifier can significantly reduce odors in a short time. 4. The most important point is to maintain cleanliness inside the car and reduce the sources of odors, which is the most fundamental way to eliminate them.

19

0

Share

How to Fix a Broken Car Antenna?

A broken car antenna needs to be assessed to see if it affects some of the car's functions, such as radio signals and GPS signals. If there is no impact and you don't mind the aesthetic effect, you may choose not to replace it. If there is an impact, it should be replaced promptly. You can purchase an antenna from an auto parts store and install it. Relevant information about car antennas is as follows: 1. A car antenna, also known as a vehicle antenna, is generally used for the car's radio and broadcasting stations. It can be divided into built-in and external antennas. 2. Radio and broadcasting antennas mainly include AM/FM antennas, soft PCB digital antennas, AM/FM/TV antennas, etc. Depending on their different functions and uses, the frequencies of the antennas also vary.

14

0

Share

Are SUVs More Fuel-Consuming?

Will early signaling result in point deduction in Subject 3?

What are the effects of a damaged ambient temperature sensor?

What are the signs of aging in a car's control arm bushings?

At What RPM Should You Shift Gears in a Car?

How to Eliminate Odors Inside the Car?

How to Fix a Broken Car Antenna?

How to Deal with Unstable Steering Wheel in Subject 3?

What does TSS2.0 mean?

What Does the Subject 1 Exam Cover?

How to Deal with Engine Emission Failure?