Are Pickup Trucks Mandatorily Scrapped After 15 Years?

1 Answers
OKyle
07/29/25 5:51pm
Pickup trucks are not mandatorily scrapped after 15 years. Below are relevant details about vehicle scrapping: Application Form Submission: Vehicle owners applying for scrapping and renewal must fill out and submit one copy of the "Motor Vehicle Alteration, Transfer, Modification, Suspension, and Scrapping Approval Application Form," stamped with the owner's seal. Registration Office Application: For vehicles that have reached the scrapping age limit, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age limit, upon verification and confirmation by the motor vehicle inspection office that they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. Definition: Vehicle scrapping age refers to a safety inspection system based on the number of seats and the period of use of the vehicle during its service life. It is stipulated that small and micro non-operational passenger vehicles, large non-operational cars, and wheeled special machinery vehicles have no usage age limit.
Was this review help?
12
4
Share
More Forum Discussions

What Causes the Steering Wheel to Pull to the Left?

Regarding the reasons for the steering wheel pulling to the left: 1. Vehicle deviation during driving may be caused by uneven tire pressure on both sides. If the tire pressure of the four wheels is unbalanced, especially the front wheels, the vehicle will deviate. Inflate both tires to the same pressure to resolve this issue; 2. It could also be a wheel hub problem, requiring a four-wheel alignment and adjustment. If the deviation occurs during braking, consider possible issues with the braking system or unbalanced braking force. First, check the brake fluid (generally replaced every two years) and whether there is air in the brake lines, etc.; 3. Next, inspect the brake pads or brake hubs, and replace them promptly if they are severely worn. It is recommended to visit a professional four-wheel alignment shop for inspection.
17
4
Share

What does the M+- next to the D gear in an automatic car mean?

M+ means upshifting, while M- means downshifting. The M1/M2/M3 displayed on the dashboard represent manual mode's 1st/2nd/3rd gears respectively. The number of gears in M mode depends on the automatic transmission's gear count. For example, a 7-speed M mode will have 7 gears. More detailed explanations are as follows: 1. The M gear is the manual mode in automatic transmission vehicles. When shifted to M gear, you can manually control the transmission's upshifting or downshifting without pressing the clutch, and the engine won't stall, just like in automatic mode. 2. The M gear is particularly useful in situations such as overtaking, going up or down slopes, driving on slippery roads due to rain or snow, navigating curves, or high-speed driving. For instance, using M- to downshift during overtaking provides higher torque, allowing the vehicle to accelerate quickly. On snowy or icy roads, using M+ to shift to 2nd gear can reduce wheel slippage. 3. Automatic transmissions typically have 6 gears: the commonly used Park (P), Reverse (R), Neutral (N), Drive (D), as well as Low (L) and Sport (S) modes. It's important to select the correct gear while driving for optimal control.
20
1
Share

What is the difference between the front and rear wiper symbols?

Car front wiper symbol is a fan-shaped icon with a diagonal line on the left and a water spray line in the middle, while the rear wiper symbol is a rectangular icon with a diagonal line on the left and a water spray line in the middle. More details are as follows: 1. The wiper, also known as the windshield wiper, is a device used to remove raindrops and dust attached to the vehicle's windshield to improve the driver's visibility. 2. The worm gear mechanism serves to reduce speed and increase torque. Its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into a left-right oscillating motion. The wiper motor adopts a 3-brush structure for easy speed change. The intermittent time is controlled by the intermittent relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charge-discharge function to make the wiper sweep at a certain cycle. 3. The wiper blade rubber is the tool that directly removes rainwater and dirt from the glass. The blade rubber is pressed against the glass surface by a spring strip, and its lip must match the angle of the glass to achieve the required performance.
14
2
Share

What is the difference between LT and C on tires?

The difference between LT and C on tires lies in their meanings. LT refers to the tire type, indicating Light Truck tires, while C is a speed symbol, representing a maximum speed of 60 km/h. Below is more information about tires: 1. Tires are one of the most important components of a vehicle, serving several key functions: supporting the entire weight of the vehicle and bearing its load; transmitting traction and braking torque to ensure adhesion between the wheels and the road; absorbing shocks and vibrations during driving to prevent excessive wear and early damage to vehicle components; adapting to high-speed performance while reducing driving noise; and ensuring safety, handling stability, comfort, and fuel efficiency. 2. Tires can be classified into approximately 7 types based on vehicle application: PC - Passenger Car tires; LT - Light Truck tires; TB - Truck and Bus tires; AG - Agricultural Vehicle tires; OTR - Off-The-Road (Engineering Vehicle) tires; ID - Industrial Vehicle tires; MC - Motorcycle tires.
10
5
Share

What are the penalty points for Subject 2 of the driving test?

The penalty points for Subject 2 of the driving test include: not wearing a seatbelt deducts 100 points, failing to use the turn signal during parallel parking or uphill parking deducts 10 points, stalling the engine once deducts 10 points, exceeding 210 seconds for reversing into the garage deducts 100 points, failing to fully reverse into the garage deducts 100 points, and the vehicle body crossing the line deducts 100 points. More information about Subject 2 is as follows: 1. Subject 2, also known as the small road test, is the first practical driving test among the four exams for students. The specific test items for Subject 2 include: right-angle turns, curve driving, hill-start parking, parallel parking, and reversing into the garage (some regions may have additional items). The total score is 100 points. For large buses, tractors, city buses, medium-sized buses, and large trucks, a passing score is 90 points, while other vehicle types require a score of 80 points to pass. 2. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), the content of the Subject 2 test includes: 1) For large buses, tractors, city buses, medium-sized buses, and large trucks: pile test, hill-start parking, parallel parking, single-plank bridge, curve driving, right-angle turns, limited-width gate, continuous obstacles, bumpy road driving, narrow road U-turns, and simulated highway, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling; 2) For small cars, small automatic transmission cars, small automatic transmission cars for disabled people, and low-speed trucks: reversing into the garage, hill-start parking, parallel parking, curve driving, and right-angle turns; 3) For three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles: pile test, hill-start parking, and single-plank bridge; 4) The test content for wheeled self-propelled machinery, trolleybuses, and trams is determined by the provincial traffic management department of the public security authority.
3
1
Share

What Causes a Sudden Change in Car Horn Sound?

Car horn sound suddenly becoming muffled is usually caused by poor contact of the horn plug, especially the contacts around the steering wheel, which are prone to wear due to frequent use. The car horn is an audio signal device during driving, ensuring traffic safety. Here are the details: 1. When the driver presses the horn switch, current passes through the contacts, generating magnetic force through the coil, causing the diaphragm to move and the soundboard connected to the diaphragm to produce sound. 2. Car horns are divided into air horns and electric horns based on sound power, and into high-pitch and low-pitch horns based on frequency. Air horns produce sound by vibrating diaphragms through compressed air, while electric horns generate sound through electromagnetic attraction vibrating the diaphragms. Electric horns are widely used in cars, while air horns are commonly found in buses and heavy trucks.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.