Are out-of-town new energy vehicles restricted in Shenzhen?

What is the method to reset the maintenance light on the Great Wall Wingle 5 diesel version?

To reset the maintenance light on the diesel version of the Great Wall Wingle 5, first, when the vehicle is not started, press and hold the mileage reset button without releasing it. Then, start the engine again, and release the button once the maintenance indicator light disappears. Alternatively, after completing the maintenance, you can ask the staff to use a computer to reset it. Below is some related information about the Wingle 5: 1. The Wingle 5 offers two cargo compartment sizes to choose from: small double and large double. The small double model's cargo compartment dimensions are 1380mm, 1460mm, and 480mm, while the large double model's cargo compartment dimensions are 1680mm, 1460mm, and 480mm. 2. The exterior design is relatively simple, with the door handles aligned in a straight line with the rear. The side skirts above the tires are raised, and the rear design is clean, featuring a vertical row of three taillights with two additional independent taillights below.

8

4

Share

What is the function of an automatic transmission valve?

The function of the valve body on the transmission is to perform high and low gear shifts. When the vehicle speed reaches a certain gear speed, the hydraulic oil pushes the valve body to automatically shift the gear to the corresponding position. Here is additional information: 1. The automatic transmission can automatically change the transmission ratio based on engine load and vehicle speed. 2. The automatic transmission is easy to operate and can significantly improve the safety and reliability of vehicle driving in congested traffic. 3. Currently, passenger cars widely use a single-stage, two-phase, three-component lock-up type integrated hydraulic torque converter composed of a pump wheel, turbine, and guide wheel. 4. After the engine starts, the crankshaft drives the pump wheel to rotate. The centrifugal force generated by the rotation causes the working fluid between the pump wheel blades to be thrown from the inner edge to the outer edge along the blades. This working fluid has both a circumferential component speed that rotates with the pump wheel and an axial component speed that rushes toward the turbine.

4

5

Share

How Long Does It Take to Get a Renewed Driver's License?

You can obtain your renewed driver's license on the same day of application if your current license is expiring. The renewal must be processed at the vehicle management office where the license was originally issued, and you can apply for renewal up to three months in advance. 1. Documents required for renewal: Original driver's license, original and copy of ID card, four one-inch color photos with white background and no hat, and a medical examination certificate from a county-level or above hospital. 2. Procedures at the vehicle management office: 1. Undergo a medical examination at a county-level or military hospital at the regiment level or above. 2. Take a number at the vehicle management office, traffic police branch, or district (city) county traffic police brigade, then submit the required documents at the service window. 3. Pay the relevant fees at the payment window. 4. Collect your driver's license at the license window.

12

5

Share

Why Does the Airbag Light Suddenly Illuminate?

The sudden illumination of the airbag light can lead to situations where the airbag fails to deploy or deploys erroneously, which should be a matter of particular concern for vehicle owners. There are five main reasons why the airbag light may come on, as follows: 1. Loose or disconnected wiring. 2. Faulty airbag sensor. 3. Airbag malfunction. 4. Faulty airbag control unit. 5. Presence of a fault code. Solutions are as follows: 1. Start with the simplest checks: inspect the airbag wiring under the seats. If any connectors are loose, simply reconnect them securely. 2. Replace the driver's side side airbag sensor. 3. Check the seat belt sensor, airbag connectors, and airbag sensors. 4. Replace the airbag control unit. 5. Use specialized equipment to clear the fault code.

14

5

Share

How to Deal with Scratches on White Cars?

Methods for restoring minor scratches on white cars: 1. Touch-up paint pens can handle small scratches. If the rust is not severe, use very fine water sandpaper dipped in water to gently sand away the rust spots. Avoid sanding randomly—always sand in straight lines in the same direction. After completely cleaning the area, apply a layer of primer. 2. Applying toothpaste can temporarily prevent rust. When you notice new minor scratches on the car body, gently apply toothpaste in a circular motion over the scratched area. Handy tips for dealing with scratches: 1. For minor abrasions, the best repair method is to fill the scratched area with a coating agent that matches the car body. The coating agent can be applied once, twice, or even three times—the more applications, the cleaner the finish. However, uniform treatment across the entire car body is also important. 2. For very shallow scratches that only affect the surface paint, immediately use a compound to treat the area, wiping in straight lines. After the scratch disappears, wipe with a finer compound and then apply wax. 3. For deeper scratches, the key is to check whether the metal surface is exposed. If the metal is not visible, rust will not form, and you can focus on applying touch-up paint. Use the tip of a brush to dab the paint on and wait for it to dry completely.

18

0

Share

What lights should be turned on when driving in foggy weather?

When driving in foggy weather, motor vehicles should turn on fog lights and hazard warning flashers. Precautions for driving in foggy weather include: 1. Pre-trip inspection. Before heading out, clean the windshield, headlights, and taillights, and ensure that the vehicle's lighting, braking, and other safety systems are fully functional. 2. Always carry a triangular warning sign or other warning markers in the vehicle. In case of sudden breakdowns requiring parking for repairs, place the warning sign 50 meters in front of and behind the vehicle to alert other drivers. 3. Continuously monitor the relationship between speed and visibility, and increase the following distance. The denser the fog, the shorter the visibility, and the lower the speed should be. It is recommended that when visibility is less than 100 meters but greater than 100 meters, the speed should not exceed 60 km/h; when visibility is less than 100 meters but greater than 50 meters, the speed should not exceed 40 km/h; when visibility is within 30 meters, the speed should be controlled below 20 km/h. 4. According to lighting usage principles, it is best to turn on front and rear fog lights, taillights, width markers, and low beams when driving in fog. This improves visibility, allowing you to see vehicles, pedestrians, and road conditions ahead, while also making your vehicle more noticeable to others. However, avoid using high beams.

10

5

Share

Are out-of-town new energy vehicles restricted in Shenzhen?

What is the method to reset the maintenance light on the Great Wall Wingle 5 diesel version?

What is the function of an automatic transmission valve?

How Long Does It Take to Get a Renewed Driver's License?

Why Does the Airbag Light Suddenly Illuminate?

How to Deal with Scratches on White Cars?

What lights should be turned on when driving in foggy weather?

How to Open the Trunk of a Honda?

What to Do When the Dash Cam Keeps Falling Off the Windshield?

How to Stop at a Red Light with an Automatic Transmission

How to Best Control the Clutch in Subject 3?