Are Motorcycles with Front and Rear Drum Brakes Inferior?

1 Answers
OAbigail
07/30/25 10:40am
Two different types of brakes have their own noticeable differences. As for which type is better, there is no absolute answer, as each has its own advantages in specific situations. For example, on muddy or gravel roads, drum brakes have stronger self-protection capabilities, while the exposed nature of disc brakes can affect braking performance. Additionally, due to the unique characteristics of disc brake components, the brake pads are prone to wear, and replacement costs can be relatively expensive depending on the vehicle model. Under these circumstances, the advantages of drum brakes become very significant. Relevant information is as follows: Drum Brakes: The structure of drum brakes is relatively simple, making them easier to repair and more cost-effective. They also offer better dust resistance. However, their braking performance is slightly inferior, primarily due to the direct relationship with the force transmission method. Disc Brakes: Disc brakes provide more noticeable braking effects and a more aesthetically pleasing overall appearance. However, due to their complex structure, the initial investment cost is high, and the subsequent costs for parts and maintenance are relatively more expensive.
Was this review help?
9
2
Share
More Forum Discussions

Does the Great Wall Pao pickup truck have a diesel version?

Great Wall Pao pickup truck does have a diesel version, which operates by relying on piston pressure in the cylinder to cause diesel fuel to self-ignite under compression. Taking the 2020 Great Wall Pao Diesel 2WD Standard Cab Elite model as an example, its body dimensions are: length 5362mm, width 1883mm, height 1884mm, wheelbase 3230mm, and minimum ground clearance 227mm. The 2020 Great Wall Pao Diesel 2WD Standard Cab Elite model is equipped with a 2.0L turbocharged engine, with a maximum torque speed range of 1500 to 2500 rpm and a maximum power speed of 3600 rpm, paired with an 8-speed automatic transmission.
7
4
Share

How to Sit Comfortably in a Car Driving Position?

Adjust the distance between the brake, accelerator, legs, and the seat to ensure a natural bend between the thigh and calf when pressing the brake, clutch, and accelerator all the way down. The ideal seat angle is about 8 degrees between the backrest and the vertical direction, though it's not necessary to measure precisely with a protractor—just a general range. Adjust the distance between your arms and the steering wheel. The correct way to hold the steering wheel is at the 9 and 3 o'clock positions, with the steering wheel adjusted downward until your arms are parallel to your shoulders. Adjust the height of the seatbelt relative to your shoulders. The seatbelt should pass over the middle of your left collarbone and must not be lower than your shoulders—ideally 5-10 cm higher. During normal driving, your head will generally be away from the headrest. The height of the headrest should be adjusted so that when you lean back, the middle of the headrest aligns with the middle of your head.
4
4
Share

What is the solution for Honda Accord idle shaking?

Check the working condition of the spark plugs, high-voltage wires, and ignition coils to see if there is excessive carbon buildup on the spark plugs. If so, clean or replace the spark plugs immediately. Clean the vehicle's "throttle body" right away. If this does not resolve the issue, the car must be sent for repair. Clean the fuel system and check whether the idle motor has carbon buildup—it should be cleaned thoroughly. Check the fuel pressure and replace components if necessary.
4
2
Share

How to Repair Corroded Car Trim Strips?

WD-40 rust inhibitor can penetrate into the capillary pores of metal to remove moisture and dampness, forming an extremely thin and dense protective film to isolate humidity and air. Carburetor cleaner can also be used, but it should be noted that it has strong corrosiveness and may also have a certain impact on the car's paint surface.
15
1
Share

How to know if driving the wrong way was captured?

Electronic eyes have various functions, some capture running red lights, some capture wrong-way driving, some capture speeding, and some measure traffic flow, etc. Generally, one-way road sections are equipped with surveillance cameras or electronic eye capture devices. Once a wrong-way driving violation occurs, the probability of being captured is very high. Violations such as improper overtaking, yielding, or wrong-way driving are penalized with 3 demerit points and a fine. If driving the wrong way on a highway, it results in an immediate 12-point deduction and a fine.
5
4
Share

How to Use Lights When Driving in Snowy Conditions?

When driving at night under low visibility conditions such as no street lights or poor illumination, motor vehicles should turn on headlights, clearance lights, and rear position lights. Turn on fog lights, low beams, clearance lights, and front and rear position lights. The speed should not exceed 60 kilometers per hour, and maintain a distance of more than 100 meters from the vehicle ahead in the same lane. Turn on fog lights, low beams, clearance lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 kilometers per hour. Turn on fog lights, low beams, clearance lights, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 kilometers per hour, and exit the highway as soon as possible.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.