Are Motorcycles Allowed on Fujian Highways?

1 Answers
AriannaFitz
07/29/25 10:28am
According to Article 26 of Chapter IV (Traffic Safety Management) in the Fujian Expressway Regulations, motorcycles are not permitted on expressways in Fujian. Key considerations for urban motorcycle riding are as follows: Observe drivers' head movements and mirrors: A driver's head movements often precede turn signals or steering wheel actions. Monitoring these directly or through rearview mirrors helps predict their next move. Anticipate sudden braking or lane changes: Taxi drivers pose higher risks as they divert attention to spot passengers. Exercise extra caution when following taxis displaying "For Hire" signs. Mind vehicle blind spots: All vehicles have dangerous blind areas, particularly large vehicles like buses and concrete mixers with significantly limited visibility. Expressway driving precautions: Maintain consistent speed: After toll gates, use acceleration lanes to merge safely. Keep steady speed with adequate following distance (e.g., 100m gap at 100km/h). Stay in your lane: Avoid unnecessary lane changes, sudden braking, or prolonged use of passing lanes. Never overtake via emergency lanes. Prepare exits/merges 500m in advance. Execute decisive overtaking: Check rear traffic and passing lane conditions before overtaking. Use audible/visual signals when passing large vehicles, maintaining safe distance (50-100m) before returning. Nighttime vigilance: Use high beams when appropriate, watch for taillights, and avoid fatigue driving. Activate hazard lights during heavy fog. Adverse weather adaptation: Rain reduces visibility - halve speed, avoid puddles, double following distance, and refrain from sharp maneuvers. Emergency parking protocol: For breakdowns, signal early, park on shoulder/emergency lane, activate hazards, and place warning triangles 150m behind vehicle.
Was this review help?
4
3
Share
More Forum Discussions

What brand of car is the one with the DS logo?

DS is a premium brand under the French automobile manufacturer PSA Peugeot Citroën. 1. DS was once a world-renowned car under the Citroën brand, and its sales made it a classic. 2. Currently, DS brand models sold in China are produced and sold by Changan PSA Automobile Co., Ltd., which is a joint venture. 3. Changan PSA was jointly established by China Changan Automobile Group Co., Ltd. and the French PSA Peugeot Citroën Group. Here is some extended information about PSA Peugeot Citroën: 1. Peugeot is a car brand under Peugeot Automobile, a subsidiary of the French PSA Peugeot Citroën Group, and Peugeot Automobile is a long-established European car manufacturer. 2. The Peugeot brand has established a sales network in 160 countries worldwide, with 10,000 sales outlets. 3. Before the automobile era, Peugeot's production scale of bicycles, motorcycles, and transport vehicles was once quite large.
14
1
Share

Can a gasoline car be filled with diesel?

Gasoline cars cannot be filled with diesel. If diesel is accidentally added to a gasoline car, do not start the engine. Immediately clean the fuel tank to resolve the issue. Additional information: 1. Consequences of mistakenly adding diesel to a gasoline car: If a gasoline car is filled with diesel and started, the fuel injector pressure will be insufficient, causing the diesel to only partially atomize. It will enter the cylinder in liquid form, leading to incomplete combustion, carbon buildup, and clogging of the fuel injectors. After diesel is added to a gasoline engine, the high-pressure mixed gas reaches the auto-ignition temperature before the spark plug ignites, causing violent combustion. This results in abnormal combustion chamber pressure, commonly known as knocking, which can damage the engine. In severe cases, it can cause engine cylinder scoring. 2. Accuracy of fuel measurement: First, do not rely on the fuel tank's rated capacity to determine fuel levels. A car's fuel tank is a container (not classified as a measuring instrument by national regulations) and cannot be used as a basis for accurate measurement. According to relevant mandatory standards, the rated capacity of a car's fuel tank should be controlled within 95% of its maximum safe capacity. Second, do not rely on the fuel gauge on the dashboard to determine fuel levels.
18
2
Share

What is the tire model of the Mazda6 Atenza?

The Mazda6 Atenza 2.0L model uses tires with the specification 225/55R17, while the 2.5L model uses 225/45R19 tires. Here is some extended information about tires: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. 2. They are typically installed on metal rims, supporting the vehicle body, cushioning external impacts, and ensuring contact with the road surface to maintain driving performance. Below is some extended information about the Mazda6 Atenza: 1. The Mazda6 Atenza is a mid-sized 4-door, 5-seater sedan with dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm. 2. In terms of power, the Mazda6 Atenza is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 116 kW and a maximum torque of 202 Nm. 3. Exterior-wise, it features Mazda's latest KODO design language, with a U-shaped front grille and LED headlights.
9
1
Share

What are the dimensions of the ninth-generation Accord?

The specific body dimensions of the Honda Accord ninth generation are as follows: 1. The Honda Accord ninth generation has a body length of 4930 mm, a width of 1845 mm, a height of 1470 mm, and a wheelbase of 2775 mm. 2. The fuel tank capacity of the Honda Accord ninth generation is 65 liters, the trunk capacity is 512 liters, and the curb weight is 1495 kg. Here is some additional information about the ninth-generation Accord: 1. The Honda Accord ninth generation is equipped with a 2.0L inline 4-cylinder naturally aspirated engine. 2. The engine has a maximum power of 114 kW at 6500 rpm, a maximum torque of 190 Nm at 4300 rpm. 3. The front suspension uses a MacPherson strut independent suspension, and the rear suspension uses a multi-link independent suspension.
8
2
Share

What are the dimensions of the BMW M8?

The specific dimensions of the BMW M8 are as follows: 1. The BMW M8 is divided into the Competition version and the standard version. 2. The body dimensions of the BMW M8 Competition are 5098mm, 1943mm, and 1423mm. 3. The body dimensions of the standard BMW M8 are 4873mm, 1912mm, and 1381mm. Below are the differences between the standard BMW M8 and the Competition version: 1. Different wheelbase: The BMW M8 Competition has a wheelbase of 3027mm, while the standard BMW M8 has a wheelbase of 2827mm. 2. Different maximum engine power: The BMW M8 Competition has a maximum engine power of 460kw, while the standard BMW M8 has a maximum engine power of 441kw. 3. The powertrain is the same; the BMW M8 Coupe M Sport version is equipped with a 3.0T inline six-cylinder turbocharged engine, with a maximum power of 340Ps and a maximum torque of 500Nm.
15
3
Share

What does the yellow triangle exclamation mark on the Kia K4 dashboard mean?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation marks: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which lights up when the tire pressure is too low. Check the vehicle's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the problem.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.