Are Motorcycle Parts Considered Contraband?

1 Answers
VonHarper
07/29/25 5:10pm
Motorcycle parts are considered contraband. Reasons for prohibition: Motorcycle parts may contain magnetic materials. Although these materials do not meet the definition of magnetic substances, they may require special loading due to potential interference with aircraft instruments. They may also contain engines, including fuel cell engines, carburetors, fuel tanks containing or previously containing fuel, compressed gas in tire inflation equipment, wet batteries, or lithium batteries. Definition of embargo: An embargo refers to a prohibition imposed by a country or alliance that prevents all its citizens from selling or purchasing goods to or from a designated party, even if the prices are advantageous. An embargo is not a military act of war. In terms of imports, it is similar to protectionism, except that its motive differs in that it aims to harm foreign sellers without benefiting domestic competitors.
Was this review help?
9
5
Share
More Forum Discussions

What are the symptoms of a bad car evaporator?

The symptoms of a bad car evaporator include the car air conditioning not cooling, the absence of refrigerant in the car air conditioning system, and the smell of car air conditioning refrigerant or refrigerant oil in the cabin. If the car evaporator is clogged, a car air conditioning manifold pressure gauge can be used for inspection and diagnosis. Here are the methods for cleaning a car air conditioning evaporator: 1. Disassembly and cleaning. This operation can easily damage air conditioning system components, and improper sealing during installation can lead to air conditioning system failures. Generally, this cleaning method is not recommended unless there is damage to air conditioning system components that requires disassembly and replacement. 2. Traditional air conditioning foam cleaner cleaning. Traditional air conditioning foam cleaner cleaning mainly relies on foam reduction and the airflow speed of the blower to remove dirt. The disadvantage is that it cannot clean targeted areas, and the water droplets after foam reduction can easily damage resistors such as the air conditioning blower resistor. 3. Visualized evaporator cleaning. This cleaning method is currently popular in the market, allowing the entire cleaning process to be seen clearly and targeted cleaning of dirt. The advantages are thorough cleaning, comprehensive sterilization, and system antibacterial properties. Since specialized equipment is required, it is recommended that car owners go to a professional cleaning shop for this service.
1
0
Share

What Do You Need to Bring for the Driving Test (Subject Three)?

Subject Three driving test requires the following items: 1. ID Card: Original valid ID card or original valid temporary ID card. 2. Examination Admission Certificate: After successful online registration, an admission certificate will be issued and needs to be printed in advance. 3. Examination Barcode: Scanning the barcode during registration is mainly for verifying the transportation management stamp. Only after printing the qualified barcode list can you proceed with registration. This process primarily reviews whether the student has completed timed driving practice according to regulations. 4. Non-local residents need a local residence permit: For those applying for a driver's license outside their registered residence, a valid original local residence permit must also be carried. Below is related information about Subject Three: 1. Introduction to Subject Three: Also known as the road safety driving test, it is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safe civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle. 2. Content of Subject Three: Preparation before getting on the car, simulated light test, starting, driving in a straight line, shifting gears, changing lanes, parking on the side, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.
12
4
Share

How to Charge a 12V Battery?

12V battery charging method: Attach the red clamp of the charger to the battery's positive terminal marked with a plus sign, and the black clamp to the negative terminal marked with a minus sign. Starting batteries sometimes become discharged due to heavy usage or prolonged storage, so they should be periodically removed from the equipment and recharged in a charging area. Supplementary charging is generally performed once a month to enhance reliability and extend service life. It is advisable to perform a supplementary charge before winter. Battery charging precautions: Initial charging: The first charge of a battery is called the initial charge, which significantly impacts the battery's lifespan and charge capacity. Insufficient charging results in lower charge capacity and shorter lifespan, while overcharging improves electrical performance but also shortens lifespan. Therefore, new batteries should undergo initial charging carefully. Dry-charged lead-acid batteries: For dry-charged lead-acid batteries, as per the user manual, if used within two years of storage, simply add the specified density of electrolyte and let it stand for 15 minutes before use without charging. However, if stored for more than two years, partial oxidation may occur on the plates. To improve charge capacity, a supplementary charge of 5-8 hours is recommended before use. Scheduled charging: When not in use for extended periods, aim to perform a health charge once a month or discharge to 50% after full charge. The optimal ambient temperature for battery charging is 25°C, which is difficult to achieve in cold winters, so indoor charging is preferable. If conditions don't permit, choose to charge during sunny daytime hours to enhance battery activity and reduce range loss.
10
2
Share

How to Remove a Car Washer Nozzle?

Introduction to the method of removing a car washer nozzle: Generally, washer nozzles come with reverse clips. You can press the reverse clips on both sides with a flat tool to remove the nozzle. Wipers, also known as windshield wipers, are devices used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. Due to legal requirements, almost all cars are equipped with wipers. Solutions for a clogged washer nozzle: 1. Check if your car's washer fluid reservoir has water. Ensure there is water before wiping the windshield; otherwise, it may burn out the wiper motor. 2. If the washer fluid reservoir has water and the motor is working, but the wipers are not spraying water, the nozzle may be clogged. 3. Take a paperclip, straighten it, and gently insert it into the nozzle, stirring back and forth. 4. Choose a paperclip with a diameter suitable for the nozzle's outlet hole size. Avoid using excessive force, as it may damage the outlet hole. 5. Avoid dry wiping the windshield. Always spray water while wiping to prevent scratches on the glass.
1
0
Share

How Many Liters of Antifreeze Are Generally Needed?

Generally, antifreeze requires about 5-7 liters. The amount of antifreeze to be added varies for each vehicle. After adding antifreeze, you can check the scale on the auxiliary water tank. Typically, there are two marks on the auxiliary water tank: one for the maximum level and one for the minimum level. The antifreeze must be between these two marks—neither too much nor too little. Below is more detailed information: 1. The engine's antifreeze must have characteristics such as freeze protection, boil-over prevention, corrosion resistance, scale prevention, and no foam formation, and it should not be affected by seasons or regions. Among these, the freezing point and boiling point are the basic indicators of antifreeze. 2. The coolant is prepared by mixing antifreeze with water in a certain ratio. Automobile manufacturers usually specify the mixing ratio for different low-temperature antifreeze grades in the user manual and also designate the type of antifreeze, which should not be mixed. The full name of antifreeze should be antifreeze coolant, meaning it is a coolant with antifreeze functionality. Antifreeze can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head during cold winter parking.
16
1
Share

What does the P in automatic transmission mean?

P stands for Parking—the parking gear, where P is the abbreviation. After parking, it is necessary to engage the P gear to prevent the vehicle from rolling, especially when parking on a slope. The general method to engage P gear is to press the brake pedal and wait until the vehicle comes to a complete stop before shifting or using the electronic button for models equipped with one. Automatic transmissions have the following gears: 1. P gear: Represents the parking gear. When parking the vehicle, shift into P gear, including when shutting off the engine or during prolonged idling. 2. R gear: Represents the reverse gear. Shift into R gear when reversing the vehicle. 3. N gear: Represents the neutral gear, which is the same as the neutral gear in manual transmissions. It can be used for short-term parking. 4. D gear: Represents the drive gear. When shifted into this gear, the vehicle moves forward. In this gear, the transmission automatically shifts between 1st and the highest gear based on the vehicle's speed and throttle conditions. 5. S gear: Represents the sport mode. When shifted into this gear, the transmission delays shifting, keeping the gear at higher RPMs for longer to increase vehicle power, though this naturally consumes more fuel.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.