Are Motorcycle and Car Antifreeze Interchangeable?

Does the 2020 Tayron 330 have a particulate filter?

The 2020 Tayron 330 is equipped with a particulate filter to meet the China VI emission standards. The particulate filter is a ceramic filter installed in the diesel engine's exhaust system, which captures particulate emissions before they enter the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Diesel engine pollution mainly comes from three sources—particulate emissions, hydrocarbons (HCx), nitrogen oxides (NOx), and sulfur. Among these, particulate emissions (soot) are mostly composed of tiny particles of carbon or carbon compounds (smaller than 4-20μm). Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate filter through a dedicated pipe. After passing through the densely arranged bag-type filters inside, the carbon soot particles are adsorbed onto a filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites, burning off the adsorbed carbon soot particles and converting them into harmless carbon dioxide that is then expelled. To check whether the 2020 Tayron 330 has a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, you can carefully review the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. Check the label above the oil filler cap. If the oil cap clearly states 0W-20 grade oil, it indicates the presence of a particulate filter. Check whether there is a cylindrical section on the exhaust pipe behind the three-way catalytic converter. If there is, that is the particulate filter.

15

1

Share

Release the Clutch First or the Handbrake First?

When driving a manual transmission car, you should first press the clutch to engage the gear, and then release the handbrake before the car starts. Below are the relevant details: 1. Precautions: Whether it's an automatic or manual transmission model, the handbrake should always be the last to be released. The main reason for engaging the gear first and then releasing the handbrake is that once the gear is engaged, the power transmission path of the transmission is connected, generating significant torque. If the brake is not properly applied, the car might suddenly lurch forward, which is very dangerous. The handbrake serves as a double safety measure in this scenario. 2. Torque Converter: If the handbrake is not released after engaging the gear, all the power output from the engine will be absorbed by the torque converter, causing its temperature to rise sharply. Prolonged exposure to such conditions can lead to the torque converter overheating and getting damaged.

15

2

Share

What brand is the Li Auto engine?

Li Auto engines are supplied by Dongan Power and are domestically produced engines. All models under the Li Auto brand are equipped with Dongan Power engines. For example, the engine model for the Li ONE is DAM12T, with a maximum power of 245kW, a maximum torque of 455 Nm, and a maximum horsepower of 131. For daily maintenance of Li Auto engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

13

3

Share

Where is the fuse box located in the 12th-generation Crown?

Toyota Crown has two fuse boxes, one in the engine compartment and one in the cabin. Below is additional information: 1. Automotive Fuse Box: An automotive fuse box is used to install car fuses. Based on the size of the installed fuses, they can be categorized into: small automotive fuse boxes, medium automotive fuse boxes, and large automotive fuse boxes. When selecting an automotive fuse box, factors such as the current rating of the fuse and the size requirements should be considered, allowing for the choice of different fuse boxes. 2. Fuses: Fuses, officially known as 'circuit breakers,' serve a similar purpose in cars as they do in households—they melt when the circuit current is abnormal and exceeds their rated current, acting as a protective barrier for the circuit. Automotive fuses are broadly divided into two types: fast-acting fuses and slow-blow fuses. When replacing fuses in the Crown, ensure the appropriate fuse is selected.

19

3

Share

What are the differences between the T-Roc and the Enclave GX?

The differences between the T-Roc and the Enclave GX are as follows: 1. Different transmissions: The T-Roc has a 7-speed dual-clutch transmission, while the Enclave GX has a CVT continuously variable transmission. 2. Different body dimensions: The T-Roc measures 4318mm in length, 1819mm in width, and 1582mm in height, whereas the Enclave GX measures 4463mm in length, 1813mm in width, and 1642mm in height. Relevant information is as follows: 1. Model: The T-Roc is FAW-Volkswagen's first SUV product, the TRoc, featuring a stylish aesthetic design. Its front face presents a T-shaped design, with the headlight assembly integrated into the front grille, complemented by circular LED daytime running lights on both sides, giving it an overall fashionable appearance. 2. Enclave GX: The Enclave GX is SAIC-GM Buick's first all-new compact SUV, equipped with a new family-style winged chrome grille. The electroplated trim extends from the logo to the bottom of the headlights on both sides, broadening the horizontal visual effect. The full LED automatic sensing headlights feature the new Evonik light curtain technology, creating a uniform light curtain effect.

8

5

Share

Why is one side wider and the other narrower when reversing into a parking space?

The main reason for one side being wider and the other narrower when reversing into a parking space is the incorrect timing of steering wheel operation. Here are the relevant explanations: 1. Steering too early: When the steering wheel is turned too early during right-side reversing, the wheels will be closer to the corner of the parking space, resulting in a left-wide and right-narrow situation after parking. 2. Steering too late: When the steering wheel is turned too late, the parked vehicle will exhibit a left-narrow and right-wide condition after reversing into the space. 3. Reverse parking: Also known as reverse pole or pole test, this is an assessment point in driver's tests where the examinee must correctly reverse the vehicle into a garage space from both sides while in motion. It primarily evaluates the driver's ability to maneuver the vehicle in confined spaces and their spatial awareness during vehicle movement.

20

5

Share

Are Motorcycle and Car Antifreeze Interchangeable?

Does the 2020 Tayron 330 have a particulate filter?

Release the Clutch First or the Handbrake First?

What brand is the Li Auto engine?

Where is the fuse box located in the 12th-generation Crown?

What are the differences between the T-Roc and the Enclave GX?

Why is one side wider and the other narrower when reversing into a parking space?

Does the 12123 System Automatically Record After Passing Subject 4?

Where is the Buick LaCrosse cabin air filter located?

What Are the Standards for Total Loss Compensation of Flood-Damaged Vehicles?

Will passing through a yellow traffic light result in penalty points?