No. Additional information about automotive charging piles is as follows: 1. Waterproof capability: During the construction of charging facilities, ground hardening and basic protection are often carried out at the bottom of the charging facilities, ensuring that the charging pile has the ability to prevent water accumulation within 20-30 cm below its body. After the charging connection is made, the overall waterproof rating must meet IP56, meaning it can withstand water spray from any angle, and general rain will not be a problem. Finally, the charging unit side is designed with short-circuit protection. If a short circuit occurs during the charging process, the device will immediately cut off the charging current. 2. Self-protection: These charging piles are made of SMC fiberglass material, ensuring long-term outdoor use and resistance to complex weather conditions, meeting the IP67 electrical protection rating. This includes lightning protection, overload protection, short-circuit protection, and leakage protection. These charging piles are internet-connected, allowing the operational status of each charging pile to be clearly monitored through a monitoring platform. Fault information will be immediately detected, enabling quick discovery and response. 3. Personal protection: These charging piles adopt an intelligent induction charging mechanism. After the charging gun is inserted into the vehicle's charging unit, it first searches for signals to confirm that the charging environment is suitable and safe. If any issues are detected, the charging gun will not initiate charging, fundamentally avoiding leakage problems and ensuring personal safety during the charging process.
