···
Log in / Register

Are Four Wheel Hub Stickers Illegal?

4 Answers
MacDawson
07/29/25 10:39pm

Wheel hub stickers for cars are not illegal. According to Chinese laws, the area of car stickers must not exceed 30% of the vehicle's body area. If the sticker area exceeds the approved requirement and is too large without approval from the traffic management department, it will result in inconsistency between the vehicle's appearance and the registration certificate, which is considered illegal modification. The fine ranges from 500 to 1000 yuan. Since wheel hub stickers do not exceed 30% of the vehicle's body area, they are not illegal. Regulations on car stickers: Although Chinese laws allow the modification of vehicle body color, red is reserved for fire trucks, yellow for engineering rescue vehicles, and white and blue for national administrative law enforcement vehicles. Ordinary cars cannot use these colors. Therefore, when modifying a vehicle, it is necessary to choose an appropriate color and submit it to the relevant department for approval and review. Car stickers are just a common form of car decoration, and car owners should use them correctly and reasonably. Car stickers must not affect safe driving, body advertisements, or painting, nor should they affect the safe driving of other drivers. Such modifications are not allowed under the Road Traffic Safety Law.

Was this review help?
1
1
Share
EvangelineLynn
08/15/25 11:51pm

Having driven for over a decade, I've seen many fellow car enthusiasts apply wheel hub stickers. Generally, traffic police won't intervene if the stickers don't obscure critical information like tire specifications or pressure indicators. However, covering up size or brand markings could be considered a violation, as Chinese traffic regulations prohibit unauthorized modifications to wheel hub appearance—doing so might even cause issues during annual inspections. A friend of mine once used reflective stickers that looked dazzling at night but was pulled over by traffic police for compromising safety recognition, resulting in a 200-yuan fine and a warning. My advice is to choose removable, heat-resistant materials for stickers, test their adhesion with a high-speed drive after application, and avoid covering too much surface area. Safety comes first—when in doubt, consult a repair shop or check the local DMV website rather than experimenting on your own.

Was this review help?
12
2
Share
Expand All
GiaDella
10/18/25 4:16am

When I first bought my car, I also wanted to add some personal touches, so I stuck a few wheel hub decals on it. They looked pretty cool. Later, I found out these things can easily cause trouble: if the stickers cover the tire's data label, traffic police can fine you for illegal modifications—my neighbor got slapped with a 100-yuan penalty. Worse yet, if the decal adhesive is poor quality, debris can peel off while driving and get stuck in the wheels, increasing accident risks. I suggest researching regulations first—for example, China's Road Traffic Safety Law requires filing modifications to a vehicle's appearance, and the wheel hub area counts. Don’t cheap out like I did; use reputable brand decals and just test them on the edges, keeping them low-key. Flashy driving isn’t worth it—practicality matters most. If you really want decals, check the rules first.

Was this review help?
9
2
Share
Expand All
SanMorgan
12/01/25 4:56am

I don't encourage casually applying wheel hub stickers as they can pose safety hazards. For example, stickers peeling off and getting tangled in brakes, or covering tire wear indicators misleading inspections, potentially causing brake failure. Chinese regulations consider appearance modifications as violations, especially when stickers block tire information, which is illegal. When choosing stickers, ensure the material is reliable and doesn't affect wheel hub heat dissipation. My advice is to test the adhesion before application and regularly clean them afterward to avoid oil buildup, making maintenance easier.

Was this review help?
14
1
Share
Expand All
More Forum Discussions

Which Volvo Technologies Are Used in the Lynk & Co 06?

The Lynk & Co 06 is equipped with a 1.5T three-cylinder engine that incorporates Volvo technology. Its overall performance is not inferior to some 1.8T engines, delivering a maximum power of 130kW (177PS) and a maximum torque of 265N·m. The transmission is a 7DCT gearbox. Here are other details about the Lynk & Co 06: 1. Exterior Design: Unlike conventional floating roof designs, it features sharp angular lines, giving it a more dynamic and powerful appearance. The Lynk & Co 06 also offers a two-tone body color option. 2. Interior Design: The cabin combines light and dark-colored panels and adopts a dual-screen layout for the instrument cluster and infotainment system. 3. Features: It comes with a parking camera, ACC adaptive cruise control, a panoramic sunroof, and more.
7
4
Share

What is the SET button in a car?

The SET button in a car is a speed adjustment switch, which serves as the speed regulation indicator for cruise control. When setting the cruise control, the vehicle needs to be accelerated to the desired speed, and then the SET button is pressed to adjust. To use cruise control, first press the ON button to activate the cruise control function. When setting the cruise control speed, press the SET button to configure it. Cruise control has speed limitations, typically requiring the vehicle to be traveling at least 48 km/h. If the brake pedal is pressed during driving, the cruise control will deactivate. To resume cruise control, press the RSM button in the car. To increase the cruise control speed, press the ACCEL button. To decrease the cruise control speed, press the CST button. The cruise control function in a car works by using a speed sensor to transmit signals and compare them with the set speed, ensuring the vehicle maintains the preset speed. The car's computer can then provide the most accurate fuel supply. Using cruise control allows for more complete fuel combustion in the engine, while also reducing fuel consumption.
16
2
Share

Solutions for Corolla Remote Key Failure?

Hold down the unlock button on the remote key, insert the key into the ignition hole, quickly turn the key to the car self-check position, immediately turn the key back to the lock position, and quickly repeat this process three times. Here is the relevant introduction to the Toyota Corolla: 1. Comprehensive safety features. The Toyota Corolla U.S. version comes standard with front and side airbags, and is equipped with the Toyota Safety Sense driver assistance suite, including standard features like lane departure alert, rearview camera, pre-collision system with pedestrian detection, automatic high beams, and dynamic radar cruise control. 2. Stable quality with low maintenance costs. Although the Toyota Corolla is not a luxury car, it has very stable quality and very affordable after-sales maintenance. 3. Spacious rear seat space. The Toyota Corolla focuses on space, with not only the domestic version offering large interior space, but the overseas version also providing ample room, with rear seat space up to 40 inches.
7
2
Share

What does the pressure gauge pointer indicate for normal pressure in a fire extinguisher

The pressure gauge pointer of a fire extinguisher indicates normal pressure when it is in the green zone. The normal pressure value of a fire extinguisher is approximately between 1.2—1.5 MPa. If the pointer is in the red zone, it means the pressure inside the cylinder is insufficient, indicating the fire extinguisher cannot be used normally. If the pointer is in the yellow zone, it indicates overpressure, meaning the pressure is too high and poses a potential danger (however, slight overpressure may still be considered normal). Relevant information about fire extinguishers is as follows: 1. Introduction: A fire extinguisher, also known as a fire cylinder, is a portable firefighting tool. It contains chemicals used to extinguish fires. The fire extinguisher is a sturdy metal cylinder filled with water or fire-extinguishing materials. 2. Working Principle: When the lever at the top of the cylinder is pressed, the high pressure generated forces the extinguishing agent inside the cylinder out, similar to how a spray can ejects its contents. The function of a fire extinguisher is to displace air, depriving the fire of oxygen and thus extinguishing it.
2
1
Share

What is the difference between a DSG transmission and an AT transmission?

The differences between a DSG transmission and an AT transmission are as follows: 1. AT: The torque converter is the most distinctive component of an AT transmission, consisting of components such as the pump wheel, turbine, and guide wheel, which directly input engine power to transmit torque and perform clutch functions. The pump wheel and turbine form a working pair, similar to two fans placed opposite each other, where the wind generated by one active fan drives the blades of the other passive fan to rotate, with the flowing air—wind—serving as the medium for kinetic energy transmission. 2. DSG: The DSG transmission is distinctly different from traditional automatic transmissions, as the DSG does not use a hydraulic torque converter from the outset. This transmission was not developed based on the conventional concept of an automatic transmission. The engineers who designed the DSG took an innovative and entirely new technological path, cleverly combining the flexibility of a manual transmission with the convenience of a traditional automatic transmission.
11
1
Share

What is the phenomenon of drivers using their eyes, ears, hands, and feet simultaneously while driving?

Drivers using their eyes, ears, hands, and feet simultaneously while driving is known as attention allocation. Here is relevant information: 1. Driving precautions: Suburban roads: There are many intersections, so be cautious of motorcycles and bicycles suddenly appearing from side roads. Avoid driving too close to the right boundary of the road and maintain sufficient safety distance. When pedestrians (especially the elderly or children) are present, remain highly alert, keep a safe distance, and control your speed. 2. "Three precautions": Pay attention to food hygiene: Due to the mobile nature of driving jobs, always choose clean and hygienic restaurants when dining to prevent infectious diseases. Pay attention to rest: Ensure adequate sleep to stay energetic and focused, enabling safe driving. Maintain a safe following distance: While driving, keep sufficient longitudinal and lateral safety distances, always be aware of the movements of vehicles and pedestrians, and avoid following the vehicle ahead too closely or driving side by side to prevent rear-end collisions and side-swipe accidents.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.