Are Electric Vehicles Afraid of Wading Through Water?

3 Answers
Fonseca
07/28/25 6:39am
Electric vehicles are not afraid of wading through water, but it is best to minimize it. Since electric vehicles do not have an engine, the internally protected batteries, motors, and electronic controls will not take in water, allowing electric vehicles to drive safely and reliably in water. For qualified electric vehicles, there will be no electric leakage causing electric shock to people after wading, ensuring the safety of drivers and passengers. Below is extended information on the characteristics of new energy vehicles: 1. Hybrid Electric Vehicles: Equipped with batteries that can conveniently recover kinetic energy during downhill driving. In bustling urban areas, the internal combustion engine can be shut off, and the vehicle can be driven solely by the battery, achieving "zero" emissions. 2. Pure Electric Vehicles: Relatively simple and mature technology, can be charged wherever there is a power supply. 3. Fuel Cell Vehicles: Zero or near-zero emissions, reduce water pollution caused by oil leaks, lower greenhouse gas emissions, and operate smoothly with no noise. 4. Hydrogen-powered Vehicles: Emit pure water and produce no pollutants while driving. 5. Supercapacitor Vehicles: Short charging time, high power density, large capacity, long service life, maintenance-free, and environmentally friendly.
Was this review help?
13
3
Share
LeHarley
08/11/25 2:36pm
To be honest, as someone who loves studying automotive technology, I don’t think electric vehicles are particularly afraid of wading through water. Compared to traditional fuel-powered cars, which can easily stall due to water intake, electric vehicles are much better off since they don’t have exhaust pipes or engine air intake systems. The battery pack is usually sealed and designed to withstand short-term water immersion. I’ve personally driven through some shallow puddles where the water only reached the middle of the wheels, and the car ran smoothly without any issues. However, once the water depth exceeds the center of the wheel hub, there’s a risk—for example, water entering the battery could cause a short circuit or electrical failure, and repairs can be costly. While driving an electric car during floods won’t easily cause it to stall, you should still avoid deep water. Always check the vehicle manual, as it usually provides the recommended maximum wading depth—don’t take unnecessary risks. In summary, shallow water is no big deal, but deep water requires caution. Safe driving is the priority—protect both your car and yourself.
Was this review help?
1
0
Share
Expand All
SanMarcus
09/27/25 8:26am
I usually commute with my electric vehicle (EV), and often encounter puddles on rainy days. Driving through shallow water has never been an issue for me—the car handles it smoothly, unlike gasoline cars that fear stalling. Once after the rain, I drove through a flooded section where the water reached about halfway up the wheels. I took it slow, and everything was fine. However, I know the EV's battery is mounted under the chassis. Even though the sealing is good, it’s not worth the risk of driving through deep water—short circuits from water damage could be a big problem. EVs are more reliable during floods, with no exhaust emissions polluting the environment, but deep water is an enemy to all vehicles. My advice is to slow down when wading through water, avoid depths beyond safety limits, and develop good habits to extend your car’s lifespan.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

Is H11 a Low Beam or High Beam?

H11 is a single-filament headlight bulb, which inherently does not distinguish between high and low beams; if the bulb serves as either a high beam or low beam in an H11 configuration, it can be directly replaced when changing the bulb. Here is a partial introduction about high and low beams: 1. Both high and low beams are used to illuminate the road ahead of the vehicle. The difference between them lies in the distance they cover—one illuminates a shorter distance, while the other covers a longer distance. 2. Typically, low beams have an illumination range of about 30-40 meters with a coverage angle of approximately 160°; high beams, on the other hand, have more concentrated light with a brighter spot, allowing them to reach higher and farther distances.
16
3
Share

Can I Get an Assessment at a 4S Shop Without Repairing?

You can get an assessment at a 4S shop without repairing. Below is the detailed process for car insurance claims: 1. Report the Incident: Promptly call the national unified customer hotline for car insurance to report the incident, such as "Pacific Insurance" at 95500, "Taiping Insurance" at 95589, or "Ping An Auto Insurance" via the "Ping An Good Driver" app for online reporting. Insurance regulations stipulate that the policyholder must report the incident within 48 hours of its occurrence. If reported after 48 hours and the policyholder cannot provide relevant incident proof, making it impossible for the insurer to verify the incident's authenticity and the extent of the loss, the insurer reserves the right to deny the claim. 2. On-site Inspection: Upon receiving the report, the insurance company will arrange for an inspector to assist with on-site handling. The inspector will then indicate which claim materials are required, and these materials must be submitted to the insurer promptly after the incident is resolved. 3. Assessment: The assessor will evaluate the vehicle's damage and issue an assessment form. If the policyholder agrees with the amount on the assessment form and has no objections, they can sign to initiate the claim. If the policyholder believes the insurer's assessment is unreasonable, they should refuse to sign the assessment form. 4. Submit Claim Materials and Review: After the incident is resolved, submit the claim materials as required by the insurer. Upon receiving the materials, the insurer will complete the approval process as quickly as possible and notify the policyholder of the result. The review time depends on the claim amount; larger claims will take longer to review.
7
0
Share

What does the cruise control lim mean?

"LIM" is the speed limit function button, which means that after activating this function, the maximum speed can only reach the set limit speed, and even if you press the accelerator further, the speed will not increase. Here are some introductions about LIM (speed limit function): 1. LIM is different from cruise control. Cruise control maintains the speed, eliminating the need for the driver to press the accelerator pedal for a long time, allowing the driver to rest; while the speed limit function only limits the maximum speed of the car, and the accelerator still needs to be pressed by the driver. 2. When the accelerator depth is below 95%, the speed will not exceed the set speed, and the vehicle will alarm when reaching the set speed.
11
2
Share

How to Open the Door When the Camry Key is Locked Inside the Car?

Here are the solutions for when the Camry key is locked inside the car: 1. If the main key is accidentally locked inside the car, try to retrieve the spare key and use it to open the door. 2. Some cars have a button near the trunk area. As long as the car key is within 1 meter of the trunk, you can easily open it. 3. Use a thin string to unlock the car door's safety switch: Thread a thin string through the gap of the car door, with a retractable buckle tied at the front. When the buckle hooks onto the safety switch of the car lock, pull it upward forcefully to unlock the safety switch, thereby opening the car door.
13
5
Share

What does it mean to check the smart key start system?

Checking the smart key start system refers to the vehicle detecting issues with the smart key start system, which may be caused by system malfunctions, receiver trigger device failures, and other problems. The following describes the functions of the start system: 1. The start switch activates the starter electromagnetic switch circuit to power the electromagnetic switch; in gasoline engines, the start switch is combined with the ignition switch. 2. The start relay controls the on/off of the starter electromagnetic switch circuit through its contacts (normally open type). The start switch only controls the start relay coil circuit, thereby protecting the start switch. There are single-type (protecting the start switch) and compound-type (protecting both the start switch and the starter).
10
4
Share

How to Activate One-Touch Window Control in Mazda?

Mazda's one-touch window control buttons are located on the driver's door armrest. Below are the detailed activation methods: 1. Opening the Window (One-Touch Down) (1) Press the switch to the first position and hold until the window moves to the desired position. (2) Press slightly harder to the second position, and the window will automatically descend. 2. Closing the Window (One-Touch Up) (1) Lift the button to the first position (applying excessive force will reach the second position), and release once the window reaches the desired position. (2) Briefly pull the switch to the second position to automatically close the window.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.