Are Diesel Cars More Fuel-Efficient?

1 Answers
Damien
07/29/25 12:31pm
Fuel efficiency in cars mainly depends on the engine displacement. Diesel cars of the same displacement are indeed more fuel-efficient than gasoline cars. For example, a 1.8-2.0L diesel car consumes about 5-6L per 100 kilometers, while a gasoline car can consume up to around 10L. Here is some relevant information about diesel cars: 1. Advantages of diesel cars: More complete combustion, less prone to carbon buildup; no spark plugs are used, reducing maintenance costs, and they can save nearly one-third of fuel consumption compared to gasoline cars of the same displacement. 2. Disadvantages of diesel cars: The main reason most small cars use gasoline engines is that diesel engines are louder and produce more vibration, not because they are less fuel-efficient or less environmentally friendly. Additionally, diesel engines have stronger power, while gasoline engines run more smoothly.
Was this review help?
13
3
Share
More Forum Discussions

What's the reason for no response when stepping on the accelerator?

If the car's accelerator pedal doesn't respond when pressed, it indicates an abnormality in the vehicle's power system. The engine's power is generated through the coordinated operation of the intake system, ignition system, and fuel system. If any of these components malfunctions, it could lead to a decrease in engine power, resulting in no response when the accelerator is pressed. Here is some additional information: The accelerator, also known as the "throttle" or "gas pedal," is a control device that regulates the engine's power (thrust). In gasoline engines, the accelerator doesn't control the fuel injection quantity but rather the opening degree of the throttle valve. A smaller opening means less air-fuel mixture enters the cylinders, resulting in lower engine power output, and vice versa.
17
5
Share

What Causes the Squeaking Noise When Pressing the Clutch?

Clutch squeaking noise when pressed is mostly caused by insufficient lubrication in the clutch system's operating mechanism or actuating mechanism. Lubricating oil can be applied first; if the noise persists, the clutch pedal assembly may need replacement. Below are detailed descriptions of the clutch: Overview: The clutch is located in the flywheel housing between the engine and the transmission, composed of friction plates, spring plates, pressure plates, and the power output shaft. It is positioned between the engine and the transmission to transmit the torque stored on the engine flywheel to the gearbox. Maintenance Method: When lifting the clutch, follow the steps of fast, stop, and slow. If the friction plates and pressure plates in the clutch are found to be contaminated with oil or rust, they should be disassembled to remove the oil or grease.
6
0
Share

What is the Difference Between Reference Price and Manufacturer's Suggested Retail Price?

The main difference between the two lies in the pricing standards. The reference price is determined based on market conditions, while the manufacturer's suggested retail price (MSRP) is set by the automaker. Below are detailed explanations: Manufacturer's Suggested Retail Price (MSRP): The MSRP is the price recommended by the car manufacturer after producing the vehicle, based on a series of factors. Many car salespeople use the MSRP as the selling price for the vehicle. Reference Price: The reference price refers to the adjusted price after a period of market feedback following the launch of a new car. For vehicles with poor sales performance, dealers may adopt lower pricing strategies to boost sales, resulting in a reference price that is lower than the MSRP. However, since sales conditions and dealer incentives vary by region, the reference price may differ from one location to another.
3
4
Share

What Maintenance Does a Car with 35,000 Kilometers Need?

After a vehicle has traveled 35,000 kilometers, it requires a third-level maintenance service. Following several second-level maintenance sessions, this service is aimed at consolidating and preserving the normal operational performance of various assemblies and components. It involves maintenance operations conducted after the car has covered a considerable distance. The main tasks include: 1. Engine Section: (1) Start the engine and listen for any abnormal noises during idle, medium, and high-speed operation. (2) Check the tension of the fan belt and adjust it if necessary. (3) Inspect and clean the carburetor, fuel pump, fuel filter, and air filter (replace engine oil as needed). (4) Check the tightness of the cylinder head, intake and exhaust manifolds, and muffler connections. Inspect and tighten engine mounting bolts, nuts, and flywheel housing bolts. (5) Clean the coarse and fine oil filters and their elements, drain any sediment from the filters, check the oil level and quality, inspect lubricant fittings for leaks, and tighten oil pan bolts. (6) Check the mounting of the air compressor and inspect pipelines for oil or air leaks. Drain oil and water from the air reservoir. (7) Inspect the radiator and water pump mounting, check for water leaks in hoses, assess the efficiency of the radiator shutter, and lubricate the water pump shaft. 2. Clutch and Transmission Section: (1) Check clutch performance and tighten the base cover bolts. Lubricate the pedal shaft. (2) Inspect the tightness of the transmission, check the oil level and for leaks, and add gear oil as needed. (3) Check the tightness and lubrication of universal joints, drive shaft, telescopic sleeve, center bearing and bracket, and trailer hitch. (4) Inspect the hand brake operation and adjust the working stroke if necessary. Lubricate the brake shoe pins. (5) Check the differential housing for leaks, inspect the oil level, and add gear oil if required. 3. Front Axle Section: (1) Inspect the front brake drums for leaks, check and adjust the front wheel bearing tightness, examine the steering knuckle and kingpin operation, lubricate them, and tighten wheel bolts and nuts. (2) Inspect the steering gear, add lubricating oil, check and adjust steering wheel play, inspect the tie rods and steering arms for tightness, and lubricate them. (3) Check shock absorber mounting, inspect leaf springs for breaks, lubricate the spring pins, and tighten U-bolt nuts. (4) Tighten bolts and nuts on the front bumper, fenders, hood, footboards, and cab. Check and tighten brake chamber connections and lubricate the brake camshaft. (5) Inspect the front axle (I-beam) for bending or cracks, and check and adjust the toe-in. 4. Rear Axle Section: (1) Check rear brake drums for leaks, adjust rear wheel bearing tightness, inspect axle spacing, tighten axle flange bolts and nuts, wheel bolts and nuts, brake chamber bolts and nuts, and lubricate the brake camshaft. (2) Inspect leaf springs for breaks, check the condition of the shackles, lubricate spring pins, and tighten U-bolt nuts. (3) Tighten fuel tank bracket bolts and nuts, and fender bolts and nuts. (4) Tighten spare tire carrier and toolbox mounts. 5. Electrical Equipment: (1) Check the battery electrolyte level, add distilled water if low. Charge the battery after adding water in winter to prevent freezing. Apply petroleum jelly to terminals to prevent corrosion and clear vent holes. Tighten battery mounts. (2) Inspect the operation of the horn, indicator lights, brake lights, turn signals, headlights, and electrical instruments. (3) Check the condition of the generator and starter motor, and lubricate their bearings. 6. Tire Section: (1) Inspect tire condition and pressure, inflate to standard pressure, and ensure all valve caps are in place. (2) Remove stones and debris from treads, patch any punctures with raw rubber, and check tire matching. (3) Check for any rubbing between tires and leaf springs, body, fenders, or other parts.
19
2
Share

Is Pressing the Clutch for Acceleration or Deceleration?

As long as the vehicle is in motion, pressing the clutch results in deceleration. When decelerating while driving, you should first apply the brakes. It is not advisable to press the clutch with your left foot while braking with your right foot, as this can cause the vehicle to suddenly lose traction, especially on slippery roads, increasing the risk of skidding. Developing good driving habits is crucial for safety. Here is additional information: Clutch: The clutch serves to gradually engage the engine with the transmission, ensuring smooth vehicle starts. It temporarily disconnects the engine from the transmission to facilitate gear shifts and reduce impact during shifting. During emergency braking, the clutch disengages, preventing overload in the transmission and other drivetrain components, thus providing a protective function. Brake: The brake, also known as the stopping mechanism, refers to the action of halting or reducing the speed of moving locomotives, vehicles, or other transport machinery. The braking system is a mechanical device designed to slow down the vehicle, also referred to as a decelerator.
1
1
Share

What Causes the Delay in Acceleration When Pressing the Gas Pedal?

Pressing the gas pedal with no immediate response followed by sudden acceleration after a few seconds is typically due to a dirty throttle body with carbon buildup, which slows down the engine's power response. This means there's no immediate reaction when you press the gas pedal, and acceleration occurs only after a delay. Below are the relevant details: Throttle Body Function: The throttle body is a controllable valve that regulates air intake into the engine. After entering the intake manifold, the air mixes with gasoline to form a combustible mixture, which then burns to generate power. Connected to the air filter at the top and the engine block at the bottom, it's often referred to as the "throat" of the car engine. Throttle Body Cleaning: If the throttle body has severe carbon buildup, cleaning is necessary. If the driving environment is good and there's no idle shaking, cleaning every 50,000 kilometers is sufficient.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.