Are Didi cars forcibly scrapped after 8 years?

1 Answers
GeorgeFitz
07/24/25 11:40pm
Didi cars are not scrapped after 8 years but are required to exit operation and can continue to be used as private vehicles. National regulations stipulate scrapping at 600,000 kilometers. This means if a car reaches 600,000 kilometers in 6 years, it will be directly scrapped. If it only reaches 400,000 kilometers in 8 years, it can continue to be used as a private vehicle without issues. Vehicle scrapping standards include: reaching the service life limit for various types of motor vehicles; failing to meet the national safety technical standards for in-use vehicles after repairs and adjustments; failing to meet national standards for pollutant or noise emissions after repairs, adjustments, or control technology implementation; and not obtaining the motor vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period.
Was this review help?
2
5
Share
More Forum Discussions

What Causes the Chevrolet Cruze's Starter Motor to Not Respond?

Below is an introduction to the reasons why the Chevrolet Cruze may not start: 1. Dead Battery: A car battery can die due to prolonged inactivity, reaching the end of its lifespan, a faulty alternator, insufficient or leaking electrolyte, blown fuses, corroded battery terminals, or excessive battery usage. Additionally, installing aftermarket components like xenon headlights, high-power audio systems, or DVD players can also lead to electrical circuit failures. 2. Excessive Carbon Buildup: Too much carbon buildup can cause poor spark plug ignition, leaky valves, and inefficient fuel injector operation, leading to engine misfires, sluggish acceleration, engine vibrations, and in severe cases, failure to start. Excessive carbon deposits in the throttle body can block airflow, preventing the engine from starting due to lack of air intake.
3
2
Share

What are the effects of gear mismatch on a car?

It can easily cause insufficient engine power leading to stalling. The following are specific introductions to related content: 1. Insufficient power: It can easily cause insufficient engine power leading to stalling, or make the engine struggle causing vehicle shaking. Safety should be noted. 2. Component wear: Over time, it can easily accelerate wear on components, leading to premature damage to the engine and transmission. Theoretically, the more gears the better, but in practice, it also depends on factors such as engine power, matching, and the rationality of the transmission structure. The more gears there are, the larger the transmission will be. 3. Things to note: Strive for smooth gear shifting. Shift gears once a certain speed is reached, do not drag the gear. Do not look down when shifting gears, shift gears step by step. If the wrong gear is engaged, do not panic; you can return to the original gear and shift again.
7
1
Share

Reasons for High Fuel Consumption in Classic Focus

Long idling time, etc. Below are the reasons for high fuel consumption in Classic Focus: 1. Not turning off the engine during long idling: Compared to normal driving conditions, the engine ECU controls a higher fuel injection volume during idling or right after startup. If the engine is left idling for a long time without turning it off or frequently restarted, fuel consumption will inevitably increase. If parked for more than 1 minute, it is advisable to turn off the engine to wait, which is both fuel-efficient and environmentally friendly. 2. Excessive carbon buildup: Increased carbon buildup makes the intake pipe wall surface rough, affecting the intake efficiency and leading to higher fuel consumption. 3. Poor cylinder sealing: After prolonged use, the cylinder sealing of the car deteriorates. Poor sealing affects the working efficiency of the piston, reduces the conversion rate, and naturally increases fuel consumption.
2
2
Share

Where are BYD's OEM factories located?

BYD has OEM factories in Xi'an, Shanghai, Guangdong, Beijing, Hangzhou, Tianjin and other places. Taking the BYD e3 as an example, here is the specific introduction of BYD e3: 1. Model positioning: The BYD e3 is a compact car under BYD, with a body structure of a 4-door, 5-seater sedan. The car's length, width, and height are 4450mm, 1760mm, and 1520mm respectively, with a wheelbase of 2610mm. 2. Chassis: The drive method is front-wheel drive, the front suspension type is MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. 3. Power: The BYD e3 is equipped with a permanent magnet synchronous motor, with a maximum horsepower of 95ps, a total power of 70kw, and a total torque of 180nm.
3
3
Share

Should I Shift to Second Gear When Going Straight Through an Intersection?

The principle for passing through an intersection is to slow down, look around, and then proceed. You must reduce speed, and whether to shift to second gear depends on whether the vehicle speed meets the shifting conditions. Related information: 1. Introduction: Gear shifting is the abbreviation for "gear lever operation method." In long-term driving practice, it has been widely referred to due to its concise and direct name. It is used very frequently. Moreover, proficiency in operation (especially for manual transmission vehicles) directly affects driving safety. 2. Extension: It refers to the driver's psychological and physiological movements to continuously change the position of the gear lever according to road conditions and vehicle speed changes. Generally, the so-called "gear lever operation method" is limited to the "gear lever" itself; whereas gear shifting not only includes the "gear lever operation method" but, more importantly, encompasses all psychological and physiological behavioral processes, including speed estimation, to achieve the goal (speed change).
1
2
Share

Where is the emergency trunk release switch for the Sportage?

The emergency trunk release switch for the Sportage is located behind the rear seats. You can see it by folding down the rear seats. Below is some relevant information about the Kia Sportage: 1. Interior: The Sportage's center console does not use tacky faux wood trim, but rather titanium-colored panels. It features power windows with backlit buttons, and the overhead light assembly integrates a sunroof switch and a glasses holder for convenience. The 6-disc CD audio system uses a front-loading design, making disc changes much more convenient than rear-mounted CD changers in the trunk. 2. Powertrain: The domestic Sportage offers two engine options: a 2.0L and a 2.7L. The former is an inline 4-cylinder engine, also Kia's proud CVVT engine, delivering 142PS maximum horsepower and 184Nm maximum torque. The latter is a V6 engine with 175PS maximum horsepower and 241Nm maximum torque.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.