Are Civil Servants Not Allowed to Drive Teslas?

What Common Knowledge Should Novice Drivers Pay Attention to?

Here are some precautions for novice drivers: 1. Pay attention to speed: As long as you are not on the highway, it is advisable for novice drivers to maintain a stable speed of around 60, which helps with control. 2. Observe the rearview mirrors frequently: The rearview mirrors allow you to monitor the road conditions on both sides and behind the vehicle, especially when changing lanes, reversing, or overtaking, where the mirrors play a crucial role. 3. Maintain a safe distance: Novice drivers tend to follow too closely. If the car in front brakes or cuts in, the typical reaction is to brake immediately, sometimes overreacting by turning the steering wheel too sharply, which can lead to accidents. Therefore, keeping a safe distance from the vehicle ahead is essential. If a car cuts in, slow down appropriately to yield. 4. Use lights correctly: Avoid turning on hazard lights indiscriminately. Turn on the parking lights at dusk, and fog lights should only be used in poor visibility conditions such as heavy fog.

8

0

Share

What Lights Should Be Used When Overtaking a Vehicle at Night?

When overtaking a vehicle at night, you should first turn on the left turn signal, then alternately use the high and low beams, and finally turn on the right turn signal to return to the original lane. The overtaking vehicle should ensure there is sufficient safe distance before passing the vehicle on the left. After maintaining a necessary safe distance from the overtaken vehicle, the right turn signal should be activated to move back to the original lane. Here are additional regulations on the use of vehicle lights in China: 1. When making a left turn, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal should be activated in advance. 2. When making a right turn, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside, the right turn signal should be activated in advance. 3. When driving at night in areas without streetlights, poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, the headlights, position lights, and rear lights should be turned on. However, high beams should not be used when driving close to the vehicle in front in the same direction. During foggy conditions, fog lights and hazard warning flashers should be activated.

20

3

Share

Does the Three-Way Catalytic Converter Need to Be Replaced?

If it is damaged, it needs to be replaced; if it is only clogged, replacement is unnecessary. For an original three-way catalytic converter, it generally does not need replacement within 300,000 kilometers and can be cleaned and restored using appropriate methods. Composition of the Three-Way Catalytic Converter: The three-way catalytic converter is typically composed of four parts: the shell, damping layer, substrate, and catalyst coating. Shell: Made of stainless steel to prevent oxidation scale from falling off, which could clog the substrate. Damping Layer: Composed of padding or wire mesh pads, it serves to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration, thermal deformation, and other factors, the padding is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. Substrate: Made of honeycomb-shaped ceramic material, though many are also made of metal (including stainless steel). Catalyst: Composed of precious metals such as platinum, rhodium, and palladium, sprayed onto the substrate to form the purifying agent. Lifespan of the Three-Way Catalytic Converter: The lifespan of a three-way catalytic converter is generally between 80,000 to 100,000 kilometers. The specific lifespan depends on the vehicle's usage conditions, as well as the quality of the fuel used and the driving environment.

19

1

Share

What brand is Tracforce tire?

Tracmax is a tire produced by Shandong Yongsheng. Shandong Yongsheng Rubber Group Co., Ltd. is located in the Rubber Industrial Park, Dawang Town, Guangrao County, China. Established in 1986, the company integrates development, production, and sales, with its main products being tire series under brands such as Yongsheng, Qichuang, and Bowei. Below is relevant information: Introduction: Shandong Yongsheng Tire owns brands such as Lutailai and EVERSHINE. The tires it produces are of excellent quality, having passed the ISO9001 International Quality System Certification at once, successfully achieving "Safety Certification" and "3C" certification. Moreover, Bridgestone tires are OEM-produced by Yongsheng, which indicates the superior quality of Yongsheng tires. Tire Series: Shandong Yongsheng Group was founded in 1986. The company is a tire manufacturer integrating development, production, and sales, equipped with advanced tooling and testing facilities domestically and internationally. Its main production equipment is imported from Japan, the USA, Germany, etc., featuring high automation, ease of operation, and low labor intensity. It boasts a vast sales and service network in China and successfully obtained the right to import and export independently in 2001. Its products are popular in the Middle East, Southeast Asia, Africa, and other regions, receiving high praise from customers worldwide. Its famous tire series mainly include Yongsheng, Qichuang, and Bowei.

18

4

Share

What is the difference between P gear and S gear?

P gear is the parking gear, while S gear is the sport gear. Below is more information about automatic transmission cars: 1. P gear is the parking gear: When the gear lever is in the P gear position, the transmission is in neutral inside, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake. It is generally used when the car is parked for a long time. When engaging P gear, the car must be completely stationary. Do not engage P gear when the car is not fully stopped, and always apply the handbrake. When parking on a slope, you should first apply the handbrake before engaging P gear. 2. R gear is the reverse gear: When the gear lever is in the R gear position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When engaging R gear, the car must be completely stationary. Do not engage R gear when the car is not fully stopped. 3. N gear is the neutral gear: When the gear lever is in the N gear position, the gears inside the transmission are in a freewheeling state, and the clutch is not engaged. The load on the transmission is minimal at this time. N gear is generally used for short-term parking. Additionally, when towing the car, the transmission should also be placed in N gear. 4. D gear is the drive gear: When the gear lever is in the D gear position, the gears inside the transmission automatically shift between the lowest and highest gears based on factors such as vehicle speed and throttle opening, according to the preset shift pattern. In most cases, you can drive using D gear.

3

5

Share

What is the tire model specification for the Audi Q3?

The Audi Q3 has two tire model specifications: 235/50R19 and 235/55R18. In 235/50R19, the first number 235 represents the tire width of 235MM, 50 indicates the tire's aspect ratio is 50%, meaning the section height is 50% of the width, and 19 represents the rim diameter of 19 inches. The middle letter "R" stands for radial tire. In 235/55R18, the first number 235 represents the tire width of 235MM, 55 indicates the tire's aspect ratio is 55%, meaning the section height is 55% of the width, and 18 represents the rim diameter of 18 inches. The middle letter "R" stands for radial tire. The Audi Q3's tires are from brands Pirelli and Goodyear, featuring unique tread designs, with the spare tire being non-full size. If you want to replace the tires yourself, follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and forms a right angle with the ground; Remove the hubcap, loosen the nuts counterclockwise without fully removing them, just enough to eliminate resistance. Keeping the tire on the ground when first loosening ensures the nuts turn, not the tire; Turn the nuts counterclockwise until loose, repeat for all lug nuts, then fully remove them; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts, install the lug nuts, and hand-tighten them until all nuts are concealed, completing the tire replacement. Besides the model, tires also display the following common data: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed a tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim size compatible with the tire for practical use, e.g., standard rim 5.00F.

17

5

Share

Are Civil Servants Not Allowed to Drive Teslas?

What Common Knowledge Should Novice Drivers Pay Attention to?

What Lights Should Be Used When Overtaking a Vehicle at Night?

Does the Three-Way Catalytic Converter Need to Be Replaced?

What brand is Tracforce tire?

What is the difference between P gear and S gear?

What is the tire model specification for the Audi Q3?

How many kilometers can you drive after the fillfuel warning appears?

Does DMI have a transmission?

What are the contents of the automatic transmission subject four exam?

What to Prepare for the Subject 2 Driving Test?