Are Cars Afraid of Humidity?

2 Answers
KendraMarie
07/24/25 8:13pm
Cars are afraid of humidity. There are 4 maintenance methods for cars in humid weather: 1. Wash the car body frequently: After continuous rainy days, the car body will not only have mud but also often have sticky substances like tar. If not cleaned in time, these substances can firmly adhere to the car body over time and become difficult to remove. Pay attention to the bottom and lower parts of the car, where dirt accumulates the most and is harder to clean; 2. Protect the paint: The paint on the car body is originally meant to protect the car shell, but the acidic components in rainwater can corrode the paint, which will eventually damage the car body; 3. Chassis maintenance: Besides the paint, the chassis is particularly prone to rust because it is close to the ground. Therefore, it is essential to pay attention to the cleaning and rust prevention treatment of the car chassis. Chassis maintenance is generally done by professional car repair centers; 4. Check the electrical system: For example, check the battery to see if the power is sufficient. Owners may sometimes encounter difficulties in starting the engine, or even if it starts, it may be weak. The most likely cause of this problem is leakage in the ignition system due to humidity.
Was this review help?
16
2
Share
MacMason
08/11/25 11:02am
My car always has issues after humid weather. Last summer was particularly rainy, and I noticed rust starting to form on the chassis, even the door locks got stuck. Moisture causes metal parts to oxidize, leading to severe corrosion over time, and electrical connectors can short-circuit, causing flickering lights or AC failure. I often park under trees in my neighborhood, and fallen leaves clog the drainage holes, making water accumulation even more troublesome. After each rain, I use a high-pressure washer to rinse the chassis to prevent mud and sand from accumulating. If parked in damp conditions for long periods, it can also cause mold growth in the interior, resulting in unpleasant odors. So, cars really fear humidity, especially older ones—they require extra maintenance. Now, I make sure to check the seals and underbody protective coatings during my monthly car wash to prolong the car's lifespan.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How to Turn On Bluetooth in a Base Model Chevrolet?

Chevrolet's in-car Bluetooth can be activated through the central control screen. Access the main interface menu on the central display. Locate and select the phone option in the menu, then navigate to the secondary menu within the phone settings. The Bluetooth option will be visible there; simply click to enable it.
17
1
Share

How to Turn on the Air Conditioning in a Chevrolet Car?

Air distribution and fan speed are automatically adjusted. Activate the optimal cooling and defogging functions. Turn the right knob to set the temperature. Open all vents to ensure good air distribution.
12
4
Share

Can Coolants of the Same Color but Different Brands Be Mixed?

Coolants of the same color but different brands cannot be mixed. It is necessary to use the same brand of coolant, as different brands may have varying production formulas. If mixed, the multiple additives may undergo chemical reactions, rendering the additives ineffective. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipelines, with a particular focus on the five-way hose. The coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, replace the hose or re-secure the connection based on the situation. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue to fill the reservoir with water, allowing the water to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may have a faint pink tint. Continue adding clean water until the water coming out is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then, add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level may drop slightly as some air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.
5
0
Share

What are the standards for Nisseki 0W20 engine oil?

Nisseki 0W20 engine oil standards include the absence of free water and sediment in appearance. The inspection items for Nisseki 0W20 engine oil are as follows: The inspection items for Nisseki 0W20 engine oil include kinematic viscosity, CC, density, flash point (open), pour point, total acid number, total base number, color, anti-foaming, total nitrogen content, and elemental content. The basic information about engine oil is as follows: Engine oil, also known as engine lubricant (English name: Engine oil), has a density of approximately 0.91×10³ (kg/m³). It serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, and shock absorption. It is often referred to as the 'blood' of a car. Engine oil consists of two main components: base oil and additives. The base oil is the primary component of lubricating oil, determining its fundamental properties. Additives are used to compensate for and improve any deficiencies in the base oil's performance, providing certain new characteristics, and are an essential part of lubricating oil.
2
0
Share

How to know if you've been photographed for crossing the solid line?

You can confirm if you've been photographed by receiving an illegal activity SMS notification or checking the violation records online. Generally, you will receive an SMS within 3 to 7 days. If there's no SMS and no violation record is found after 15 days, it means you either weren't photographed or the violation hasn't been processed yet.
10
3
Share

How to Set the Ambient Light Switch on the Avalon?

Click on the vehicle icon in the central control screen, then select the control option. Turn on the ambient lighting option (the small light bulb button) to activate the ambient lights. Click the small light bulb again to turn off the ambient lights. There are also options to adjust brightness and color, which can be customized according to personal preference.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.