Are Car Refrigerators Actually Practical?

How is the Quality of Goodyear Tires?

Goodyear tires are highly recognized in the market, and their quality is generally good. However, whether they are suitable or not depends on the vehicle. Tire Maintenance: 1. Develop Good Driving Habits: If the driver frequently accelerates aggressively, makes sudden turns, brakes abruptly, or parks by climbing curbs, it can lead to severe tire wear. Therefore, the most direct and effective way to maintain tires is to develop good driving habits. 2. Ensure Proper Inflation Pressure: In winter, temperatures are low, and according to the principle of thermal expansion and contraction, tire pressure tends to be insufficient. Thus, it is advisable to slightly increase the tire inflation pressure in winter to reduce wear. In cold winters, it is recommended to use an inflation pressure 10%-15% higher than the standard, but it should not exceed the maximum inflation pressure specified in the product manual. 3. Avoid Overinflation: In summer, tire pressure tends to be higher, and many drivers pay attention to tire pressure to prevent blowouts. However, it is important to note that tire pressure changes with temperature, so it is best to measure tire pressure at room temperature.

6

5

Share

How to Make Windshield Washer Fluid?

It is not recommended to make your own windshield washer fluid. DIY windshield washer fluid lacks safety guarantees, especially if the production process is not rigorous enough. The ingredients used may be too simple to achieve the effectiveness of high-quality washer fluid. Homemade washer fluid cannot guarantee performance in terms of cleaning effect and antifreeze properties, and it can easily cause scratches or other damage to the car windshield. Here are some methods to identify quality windshield washer fluid: 1. Check the foam: Shake the washer fluid before purchasing. The amount of foam can indicate its performance—generally, more foam means more activators in the fluid. If the foam is fine and dense, it suggests that the surfactants in the washer fluid are more environmentally friendly. 2. Check the viscosity: The viscosity of windshield washer fluid is also an indicator of quality. The more viscous the fluid, the more ingredients it contains. Turn the bottle upside down and observe the speed at which bubbles rise—slower bubble movement indicates higher viscosity. 3. Check for impurities: High-quality washer fluid is clear and free of any impurities or sediment. After purchasing, turn the bottle upside down to inspect for any impurities.

7

5

Share

Can Car Maintenance Be Done Outside of 4S Stores?

Car maintenance can indeed be performed outside of 4S stores. Below are relevant introductions about automotive 4S stores: 1. Introduction to 4S Stores: The full name of a 4S store is Automobile Sales Service 4S Store, which is a car sales enterprise integrating four functions: vehicle sales, spare parts, after-sales service, and information feedback. 2. Advantages of 4S Stores: Brand advantage, as most 4S stores deal with car brands that have good brand effects, strong competitiveness, and relatively large market shares. Complete and standardized service system, the core competitiveness of 4S stores lies in winning customers with high-quality services. At 4S stores, consumers can access all value-added services regarding car information, market trends, after-sales services, maintenance guidelines, spare parts supply, etc. Both vehicles and parts are guaranteed to be original, relieving consumers of concerns about after-sales services, repairs, and maintenance.

20

5

Share

What does 'cruise' mean in Chinese in the context of cars?

The Chinese meaning of 'cruise' in cars is the electronic cruise control system, which allows the driver to set the vehicle at a fixed speed, enabling the car to accurately maintain the set speed. Cruise control should not be used in the following situations: 1. In principle, cruise control is designed for use on highways or fully enclosed roads. On non-enclosed roads, complex road conditions can compromise traffic safety. 2. It is prohibited in rainy conditions and during snowy or icy weather. 3. It should be disabled on winding mountain roads or roads with excessive curves. Under normal circumstances when navigating curves, it is necessary to appropriately accelerate to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed, with the throttle controlled by the onboard computer, which can often pose dangers when driving on curves. Under such conditions, it is advisable to appropriately control the speed. 4. Cruise control is also unsuitable on roads with heavy traffic.

6

3

Share

How Often Should Generator Engine Oil Be Changed?

Oil change intervals vary depending on the type of oil. Generally, mineral oil should be changed every six months or 5,000 kilometers, semi-synthetic oil every six months or 7,500 kilometers, and full synthetic oil every six months or 10,000 kilometers. Introduction to Engine Oil: Engine oil, also known as engine lubricant (English name: Engine-oil), serves multiple functions including lubrication and friction reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of a car. Composition of Engine Oil: Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricating oil, determining its fundamental properties. Additives are used to compensate for and improve any deficiencies in the base oil's performance, as well as to impart new characteristics, making them an essential part of lubricating oil.

6

3

Share

How to reset the maintenance light on Baojun RS5?

Here are the steps to reset the maintenance light on Baojun RS5: 1. First, turn off the ignition switch, then press and hold both arrow buttons simultaneously, and turn on the ignition switch. After about 3 seconds, release both arrow buttons. 2. The zeroing menu will appear, asking if you want to reset. Press and hold the SET button to reset for more than 3 seconds. Press the MODE button, turn off the ignition switch, and the reset is complete. Below is relevant information about car maintenance: 1. Car maintenance refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as a preventive measure, also known as car servicing. 2. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.

6

3

Share

Are Car Refrigerators Actually Practical?

How is the Quality of Goodyear Tires?

How to Make Windshield Washer Fluid?

Can Car Maintenance Be Done Outside of 4S Stores?

What does 'cruise' mean in Chinese in the context of cars?

How Often Should Generator Engine Oil Be Changed?

How to reset the maintenance light on Baojun RS5?

Has the Wuling Hongguang Xia been launched?

What are the penalties for not wearing the seat belt in the passenger seat?

Is 120 km/h fast for a motorcycle?

How long after obtaining a driver's license can you drive on the highway?