Are Car Oil Filters Universal?

What does engine start-stop mean?

Engine start-stop is a very practical automotive energy-saving and emission-reduction technology. It automatically shuts off the engine when the vehicle comes to a temporary stop during driving (such as waiting at a red light). When it's time to move forward again, the system automatically restarts the engine. There are two main types: 1. Basic start-stop technology: The engine automatically turns off when the car encounters a red light or traffic jam, and promptly restarts when the driver releases the brake pedal or steps on the clutch (or accelerator pedal). 2. Advanced start-stop technology: Equipped with brake energy recovery function, it can convert part of the braking energy into electricity to charge the battery. In hybrid vehicles, the start-stop system is an important component of the powertrain.

12

1

Share

What's the matter with incorrect flow rate in the fuel tank venting system?

p0441 The reasons for incorrect flow rate in the fuel tank venting system: The activated charcoal canister is leaking or blocked. Here’s how to prevent vent hole blockage: 1. Regular inspection: Frequently check the vent holes to prevent potential issues. 2. Pay attention to airflow sounds: When refueling, listen for the sound of airflow when opening the fuel tank cap. One is the sound of air escaping, which is normal and common in summer; the other is the sound of air being sucked in. If you hear the latter, it indicates that the pressure inside the fuel tank is lower than the external pressure, which is likely due to a blocked vent hole. 3. Cover the vent hole with a screen: The vent hole is made of metal, so it's best to wrap it with a screen. For plastic hose vent holes, point the opening downward to avoid blockage.

17

1

Share

Can Tire Bolts Loosen Over Time?

Automotive tire bolts tightened clockwise to the proper position will not loosen under normal conditions. Exceptions include: 1. When tightening the bolts, if the jack has already been removed prematurely, the bolts may not be properly seated. 2. During tightening with the jack supporting the vehicle and the tire off the ground, if the bolts are hand-tightened until they won't turn further, use a tire wrench to apply slight diagonal force, ensuring no gap exists between the tire and brake disc. 3. After lowering the jack and removing it, tighten the bolts in a crisscross or diagonal pattern using a tire wrench to ensure even distribution of force on all bolts. 4. After final tightening, perform a test drive. After driving 50-100 kilometers, check the bolt condition for any loosening. If necessary, support with the jack again and repeat the above steps, ensuring uniform force application. 5. Both bolts and studs should be replaced simultaneously when needed. 6. If the bolt holes on the wheel rim have become enlarged, the bolts cannot be properly tightened, rendering them ineffective for securing the wheel.

13

2

Share

Can You Keep Driving When the Coolant Warning Light Comes On?

When the coolant warning light comes on, it is not advisable to continue driving the vehicle. Here are some details about automotive coolant: 1. After the coolant warning light illuminates: It is not recommended to keep driving the car. When the coolant level is low, the engine generates extremely high temperatures during operation, and without coolant, the engine cannot function properly. 2. The coolant used in cars must meet the vehicle's specifications: You can check the coolant level by opening the engine hood. 'Min' indicates the lower limit, and 'Max' indicates the upper limit. The coolant level should be between these two marks. 3. Driving with low coolant levels: Continuing to drive under such conditions may lead to rising engine temperatures, potentially causing severe damage to the engine. The primary function of coolant is to dissipate heat from the engine. Without coolant, the engine's cooling system fails, significantly reducing the vehicle's safety.

18

5

Share

What is the correct approach when a large passenger bus experiences brake failure and loses control?

When a large passenger bus experiences brake failure and loses control, the correct approach is to steer into an emergency escape lane, use engine braking, apply the parking brake, and if necessary, use the vehicle body to scrape against roadside obstacles to slow down. Quickly use the handbrake and shift to a lower gear, maintain control of the steering wheel, promptly avoid obstacles, and drive the vehicle to a safer location. Below are precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your appropriate lane promptly after completing the overtaking maneuver, and avoid occupying other lanes for extended periods. Additionally, emergency lanes should not be occupied unless for special reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, as it can lead to irreversible consequences both on local roads and highways. 3. Maintain a safe following distance: Under normal conditions, on dry roads with good braking, the following distance (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, the distance should be no less than 80 meters; at 100 km/h, no less than 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the following distance should be doubled. 4. Observe traffic signs: Always be aware of roadside and overhead signs and markings while driving, and stay slightly to the right to avoid running over the right lane divider, allowing sufficient lateral distance for overtaking vehicles. 5. Do not arbitrarily occupy emergency lanes during accidents: Traffic incidents are inevitable on highways. If other vehicles cause an accident leading to lane blockage, do not occupy the emergency lane, as this may hinder rescue vehicles from performing their duties. 6. Avoid fatigued driving and take timely breaks: Fatigued driving is extremely dangerous on highways. When fatigued, a driver's reaction time slows, making it difficult to respond appropriately to sudden situations.

1

5

Share

How to Set Up One-Touch Window Roll-Up?

One-touch window roll-up setup: First, press the vehicle's one-touch start button to power on the vehicle. Then, continuously pull the one-touch window roll-up button on the left door armrest. While holding the window roll-up button, press the button on the left multifunction steering wheel. Next, press the SET button on the right multifunction steering wheel to complete the one-touch window roll-up function setup. Below is related information about the one-touch window function: 1. With standard power windows, you need to hold the switch until the window reaches the desired position, then release the button to stop the movement. Cars equipped with one-touch windows have a two-stage window control switch. The first position works like a standard power window. The second position allows the window to automatically open or close completely with just one press and release. 2. Nowadays, most mid-to-high-end models come with one-touch window functionality, primarily for the convenience of drivers and passengers. This feature helps prevent drivers from being distracted by operating windows, thereby improving safety. 3. One-touch windows usually come with an "anti-pinch" feature to avoid the risk of pinching fingers.

15

3

Share

Are Car Oil Filters Universal?

What does engine start-stop mean?

What's the matter with incorrect flow rate in the fuel tank venting system?

Can Tire Bolts Loosen Over Time?

Can You Keep Driving When the Coolant Warning Light Comes On?

What is the correct approach when a large passenger bus experiences brake failure and loses control?

How to Set Up One-Touch Window Roll-Up?

What is the issue with P2188 Cylinder Bank 1 System Too Rich at Idle?

What is the tutorial for adjusting the height of high beams?

How to Use Clutch and Brake When Going Downhill

What does KERS on a car mean?