Are Car Batteries Waterproof?

What does it mean when the CCB ETC tag is disassembled?

CCB ETC tag disassembly means that the device is currently unavailable and needs to be reinstalled and reactivated at the original processing point or any highway ETC service center. ETC installation method: Sensor installation. The ETC device is uniformly installed on the front windshield inside the car, next to the center rearview mirror. It comes with a plastic suction cup to attach to the windshield. Choose an installation location that does not obstruct the front view while driving. Sensor wiring harness installation. Plug the sensor's wiring harness connector into the sensor's connection port. The wiring harness is connected through the car's internal network. Separate this wiring harness from the car's intelligent information system, wrap it along the interior ceiling trim panel, and press it into place without needing to dismantle the interior. This effectively hides the wiring. Insert the card into the ETC sensor. Gently insert the side of the card with the chip facing up into the ETC sensor's card slot. The sensor detects the chip and reads the express card. If the card is inserted correctly, the sensor's display screen will light up and show "start accounting," indicating that the sensor and express card are properly connected. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth is on." If "tag invalid" appears when inserting and removing the card twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag directly to enable Bluetooth. Turn on the phone's Bluetooth, open the corresponding mobile app (usually with a download QR code on the electronic tag), and enter the device activation interface. Click "connect device" and wait patiently for the "connection successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.

10

1

Share

What is the fault when the EPC light is on in a China V diesel vehicle?

Intake system failure, such as leaks or blockages, or a dirty throttle body with excessive carbon buildup, etc. Solutions: Troubleshoot the intake system, use fuel that meets standards, clean the throttle body; remove carbon buildup from related parts and clean them; rewrite relevant ECU data; the possibility of other faults cannot be ruled out. Specific repairs should be based on actual vehicle inspection results. China V Standard: The China V standard is equivalent to the EU's Euro V standard. From China I to China IV, each upgrade in standards reduces vehicle pollution by 30% to 50%. Using new standard gasoline and diesel will reduce multiple pollutants, cut PM2.5 emissions, and further tighten environmental indicators from China IV to China V. Among these, sulfur content is reduced from 50ppm to 10ppm, and fuel quality is further improved. Research results show that upgrading vehicle gasoline and diesel quality contributes significantly to emission reduction. Replacing China IV gasoline and diesel with China V will achieve at least a 10% and 7% reduction in nitrogen oxide emissions, respectively, and effectively control hydrocarbon, carbon monoxide, nitrogen oxide, and particulate emissions.

8

1

Share

What does an exclamation mark on the car mean?

There are many types of exclamation marks that may appear on a car, mainly including: tire pressure indicator light, lighting fault light, steering system fault light, brake fault light, transmission fault light, and wiper fault light. Tire pressure indicator light: When the car starts, it performs a self-check, and the tire pressure indicator light will undergo a function test. It will automatically turn off after 2 to 3 seconds. If this light comes on while driving, it indicates a problem with the car's tire pressure. If the tire pressure indicator light stays on, you can press the reset button to reset it. Lighting fault light: If the lighting fault light is on, it means there is a fault with the car's headlights, possibly due to a burnt-out bulb. Steering system fault light: If the steering system fault light is on, it indicates that the electric or mechanical steering mechanism is not working or there is a fault with the steering column lock. Brake system fault light: If the brake system fault light is on, it means there is a fault with the brake system or the brake fluid level is too low. Transmission fault light: If the transmission fault light is on, it indicates an abnormality in the transmission. Wiper fault light: If the wiper fault light is on, it means that parts of the wiper are damaged or the wiper is not working.

7

3

Share

What does the plus and minus sign mean in automatic transmission?

The plus sign represents upshifting, while the minus sign represents downshifting. Below is an introduction to automatic transmission: 1. Classification: As the name suggests, automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. Generally, automatic transmission vehicles have six gear positions, from top to bottom: P, R, N, D, S, L. 2. Operation: Driving an automatic transmission vehicle using only the parking gear (P), reverse gear (R), neutral gear (N), and drive gear (D) can fully meet the needs of general driving. If encountering some special driving environments, other functional gears need to be used. Therefore, if the correct operation and control method is chosen, an automatic transmission vehicle can perform better than a manual transmission.

9

1

Share

What is the Difference Between Front-Wheel Drive and Rear-Wheel Drive Cars?

Here are the differences between front-wheel drive and rear-wheel drive cars: 1. On steep slopes: Rear-wheel drive cars have better uphill capability compared to front-wheel drive cars, as the front wheels of front-wheel drive cars are more prone to slipping when going uphill. 2. Rainy or snowy days: Rear-wheel drive cars are much more likely to slip in rainy or snowy conditions, making them harder to control than front-wheel drive cars. 3. Cost: Since rear-wheel drive cars have an additional set of components to transfer power from the front to the rear wheels, they are generally more expensive mid-to-high-end vehicles. Their purchase price, maintenance costs, and repair costs are all higher than those of front-wheel drive cars, although there is not much difference in fuel consumption.

8

5

Share

When Should Brake Drums Be Replaced?

For front wheels, it's typically at 30,000 kilometers, and for rear wheels, at 60,000 kilometers. However, the exact timing depends on the driver's habits and the vehicle's road conditions. The most accurate method is to check the thickness of the brake pads. If the thickness is less than 3 millimeters, replacement is necessary. Here are some relevant details: 1. Brake Lifespan: Under normal conditions, the front brake pads last about 30,000 kilometers, while the rear ones last around 60,000 kilometers. Since each vehicle's mileage varies, so does the wear on the brake pads; 2. Replacement Criteria: When brake pads become too thin, their effectiveness significantly decreases. During inspection, note that new brake pads are usually about 1.5cm thick. If they wear down to approximately 0.3cm, they should be replaced promptly.

7

5

Share

Are Car Batteries Waterproof?

What does it mean when the CCB ETC tag is disassembled?

What is the fault when the EPC light is on in a China V diesel vehicle?

What does an exclamation mark on the car mean?

What does the plus and minus sign mean in automatic transmission?

What is the Difference Between Front-Wheel Drive and Rear-Wheel Drive Cars?

When Should Brake Drums Be Replaced?

Where is the oxygen sensor located in a car?

Will there be any impact after reattaching the fallen plastic cover of the rearview mirror?

What does the 'hold' indicator on the car dashboard mean?

What is the height of a regular sedan?