···
Log in / Register

Are Audi Engines the Same as Volkswagen's?

5 Answers
VanCameron
07/25/25 8:54am

Audi does not use Volkswagen engines because the tuning of Audi and Volkswagen engines is different. Different Audi models have different engine specifications. For example, the Audi A3L is equipped with a DJS engine, delivering a maximum horsepower of 150 HP, a maximum power output of 110 KW, and a peak torque of 250 N.m. The Audi Q7 offers two engine options: DCB and DNE, with maximum horsepower ratings of 340 HP and 245 HP, maximum power outputs of 250 KW and 180 KW, and peak torques of 500 N.m and 370 N.m, respectively. Here are some recommended maintenance practices for Audi engines: 1. Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. 2. Regularly change the engine oil and oil filter. The quality of any lubricating oil deteriorates over time. After a certain mileage, degraded oil can cause various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain the correct oil level. 3. The oil filter traps solid particles and viscous contaminants as oil passes through its fine pores. If the filter becomes clogged and oil cannot flow through, the filter may rupture or the safety valve may open, allowing unfiltered oil to bypass the filter and carry contaminants back to the lubrication system, accelerating engine wear and increasing internal contamination. 4. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These substances mix with metal particles from component wear, forming sludge. In small amounts, sludge remains suspended in the oil; in larger quantities, it precipitates and can clog filters and oil passages, hindering engine lubrication and causing wear. 5. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the lifespan of both the radiator and the engine.

Was this review help?
18
5
Share
MacNatalie
08/11/25 1:58pm

Audi engines are indeed part of the Volkswagen Group. I've personally looked into this matter after driving a Volkswagen Tiguan and an Audi Q5 for several years, and noticed they share the same engine series - like the 2.0T EA888 commonly found in VW models, though the Audi version might have sportier tuning. As a subsidiary brand, Audi shares many technologies and platforms with Volkswagen, which reduces development costs and makes maintenance easier with readily available parts. Don't underestimate this sharing strategy - it helps Audi maintain competitiveness among luxury brands while keeping prices more affordable. However, Audi versions typically feature finer craftsmanship and smoother driving feel. Overall, this design approach is quite smart for cost-effectiveness and reliability. I'd recommend having technicians check engine condition during regular maintenance to prolong service life.

Was this review help?
13
5
Share
Expand All
JuneLee
09/27/25 7:13am

Audi engines are essentially products of the Volkswagen Group. I often chat with friends about cars - Audi is owned by Volkswagen, just like one big family. Core engines like the 1.8L or V6 series are shared across brands. The Volkswagen Group shares technologies internally to save R&D costs and make parts more interchangeable, which also makes repairs easier. From my experience, Audi's tuning might lean towards performance feel, but the fundamentals remain the same. This practice is common in the auto industry, similar to the Nissan-Infiniti relationship. The benefit is consumers get more affordable premium cars. Don't worry when buying an Audi - these engines have reliable reputation, just remember to maintain proper fluid changes.

Was this review help?
19
3
Share
Expand All
Morgan
11/11/25 2:24am

Audi engines are indeed from Volkswagen. I've driven both the Volkswagen Passat and the Audi A4, and their engines are essentially the same. Audi is part of the Volkswagen Group, so core technologies are shared. This approach by Volkswagen Group is highly efficient—developing one engine for multiple brands saves resources. The Audi version might be more refined with quicker acceleration. From a maintenance perspective, parts are interchangeable, saving both money and hassle. When buying a car, it's advisable to check the manual to confirm the engine type.

Was this review help?
7
5
Share
Expand All
Phil
01/01/26 4:09am

Most Audi engines are derived from Volkswagen technology. I've done my own research, and Audi is part of the Volkswagen Group. For example, the EA888 engine is used in both the Volkswagen Magotan and the Audi A3. This shared strategy reduces manufacturing costs, making car prices more reasonable. The Audi version offers an optimized driving experience, and when it comes to maintenance, don't forget to visit authorized service centers to ensure quality.

Was this review help?
6
0
Share
Expand All
More Forum Discussions

How Long is the Warranty for Volkswagen Transmissions?

Volkswagen's 09G transmission comes with a 3-year warranty, while the DSG transmissions installed in older models of the Magotan and some newer Magotan models have an extended warranty of up to 10 years. The exact warranty period should be based on official data. A transmission is a mechanism used to alter the speed and torque from the engine, capable of fixing or changing the gear ratio between the output and input shafts. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also featuring a power output mechanism. Taking the Volkswagen Tayron as an example: it is a model under the Volkswagen brand, featuring a horizontal bar-style front grille and LED headlight assemblies on both sides. In terms of configuration, this vehicle is equipped with a 4-cylinder turbocharged engine, paired with a 7-speed dual-clutch transmission.
7
2
Share

What is the normal position of the Ford Focus temperature gauge?

Ford Focus temperature gauge is normal in the middle position. The lowest temperature of the Focus temperature gauge is 60 degrees, and the highest temperature is 120 degrees, with each grid representing 15 degrees. When the engine starts, the temperature gauge should indicate no less than 50 degrees; during normal driving, the normal range of the temperature gauge should be between 70 and 90 degrees. Taking the 2021 Ford Focus as an example, its body dimensions are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. The maximum power of the engine equipped in this car is 90kw, and the maximum torque is 153nm.
7
5
Share

What does Honda exi mean?

Honda exi is the standard configuration. Honda vehicles generally come in three grades: lxi, exi, and vti, with three different badges used to distinguish the vehicle's configurations. The standard, low, medium, and high configurations of a car have no difference in basic infrastructure, but only some additional features are included. Taking the Honda Accord as an example: it is a mid-size sedan launched by Honda Motor Co., Ltd., with a more sporty exterior design compared to the previous generation. From the side view, the rear features a fastback design, while the side waistline adopts a three-dimensional design that extends from the front to the rear, visually elongating the body length.
3
4
Share

What are the reasons for the starter not rotating?

The reasons for the starter not rotating: 1. Insufficient battery charge or disconnected, loose, or poor contact of the connecting wires; 2. Burned main contacts of the starter electromagnetic switch, open circuit of the pull-in coil or hold-in coil; 3. Open circuit in the starter armature winding; 4. Bent or deformed starter armature shaft, excessive tightness in the assembly of the armature shaft and copper sleeve, friction between the armature core and magnetic poles, causing the starter not to rotate; 5. Severe burning of the commutator, excessive wear of the brushes, brushes stuck in the brush holder, or aging and loss of spring tension in the brush spring. Starters are classified by working principle into DC starters, gasoline starters, and compressed air starters.
13
4
Share

Why Isn't the Reversing Radar Beeping?

When you find that the reversing radar isn't beeping, first check if the wiring connection at the bumper is intact. Then, check whether the reversing light turns on when you shift into reverse gear. If it doesn't, inspect if the reversing light's connection switch is faulty. Next, see if the computer displays any fault codes. If none of these issues are present, then check if the reversing radar itself is malfunctioning. If the problem lies with the reversing radar, the first possibility to consider is whether the buzzer is broken. In this case, you'll need to purchase and install a new buzzer. Additionally, obstacles that are too low, such as those below 10-15cm, might be overlooked by the sensors. Moreover, the closer the obstacle is to the vehicle, the lower this height threshold becomes, increasing the risk. Another scenario involves very narrow obstacles. Due to the narrow beam of the ultrasonic signals emitted by the radar sensors, there can be significant blind spots when detecting thin obstacles. Items like traffic bollards used to block vehicles or the diagonal steel cables on utility poles can pose hazards. Now, do you understand why the reversing radar might not beep?
19
4
Share

What Must Be Replaced During a Car's First Maintenance?

During a car's first maintenance, the following items must be replaced: engine oil and the oil filter. Other tasks mainly involve inspections, such as tightening visible screws and nuts under the chassis and checking the stability of the exhaust pipe hangers. The first maintenance must be performed within either 5,000 kilometers or six months of the car's use, whichever comes first. It is ideal to perform the first maintenance when the car has been driven between 4,000 to 5,000 kilometers, but it is recommended not to exceed six months of usage. When going for the first maintenance, bring the maintenance manual and the vehicle's registration certificate. Remember to have the 4S shop stamp the maintenance record each time, detailing the maintenance items and the date. This practice facilitates the next owner in viewing the vehicle's maintenance history when the car changes hands.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.