Are all the questions in Subject 1 exam from the question bank?

1 Answers
CeciliaRose
07/30/25 1:06am
All questions in the Subject 1 exam are from the question bank. The total duration of the Subject 1 exam is 45 minutes, and the test paper consists of 100 questions, including true/false questions and single-choice questions, with a full score of 100. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". Content of the Subject 1 exam: The exam content includes the most basic knowledge such as driving theory fundamentals, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The theoretical driver's exam schedule is arranged by the local vehicle management offices. Notes for the Subject 1 exam: Follow the instructions of the staff and receive your student file in order in the waiting area; carry and present your ID card for inspection by the supervising officer; mobile phones must be turned off when entering the exam area; no loud noise is allowed in the exam area; regulation textbooks are not allowed in the exam area (or should be placed in your bag); after the exam, keep your ID card safe and submit the file to the "Submission Window" at the front of the exam area.
Was this review help?
14
0
Share
More Forum Discussions

Why Can't the Car Door Open on Rainy Days?

On rainy days, the inability to open the car door may be caused by moisture affecting the central locking system's wiring. Below is relevant information about the central locking system: 1. Introduction: The central locking system, fully known as the Central Control Door Lock, is a car accessory that allows remote locking and unlocking without inserting the key into the lock. It consists of a door lock switch, an actuator, and a controller. 2. Main Functions: When the driver locks their door, all other doors lock simultaneously. The driver can unlock all doors at once using the door lock switch or open a single door individually. When the vehicle reaches a certain speed, all doors automatically lock to prevent accidental opening by passengers. Besides the driver's door, other doors are equipped with separate spring lock switches for independent control of each door.
3
3
Share

What are the differences between Mercedes-Benz A and C?

Mercedes-Benz A and C have the following differences: 1. Different body dimensions: The length, width, and height of the Mercedes-Benz A are 4622mm, 1796mm, and 1454mm respectively; the Mercedes-Benz C measures 4704mm, 1810mm, and 1454mm. 2. Different vehicle positioning: The Mercedes-Benz A is positioned as a compact car; the Mercedes-Benz C is positioned as a midsize car. 3. Different powertrains: The Mercedes-Benz A is equipped with either a 1.3T or 2.0T engine, all paired with a 7-speed dual-clutch transmission; the Mercedes-Benz C comes with 1.5T, 1.6T, or 2.0T engines, all mated to a 9-speed automatic transmission.
18
1
Share

What is the maximum net power of 100kw in horsepower?

Engine maximum net power of 100kw is 136 horsepower. Horsepower calculation: Horsepower and KW are both units of power, indicating how fast a machine does work. KW is the international unit, 1 horsepower equals 0.736W, therefore, 100KW is approximately equivalent to 136 horsepower. Engine power loss: Higher specific power and specific torque are certainly better, indicating sufficient power reserve. For the same displacement, higher power is definitely better. The engine's power is not equal to the car's power, as there are intermediate losses in mechanical transmission. Additionally, designs that thicken and reinforce the body for safety considerations can also lead to engine power loss.
11
1
Share

What Are the Common Types of Throttle Bodies?

There are two types of throttle bodies: traditional cable-operated and electronic throttle bodies. Below is an introduction to both traditional cable-operated and electronic throttle bodies: Traditional Cable-Operated Throttle Body: The traditional engine throttle control mechanism operates via a cable (flexible steel wire) or linkage rod, with one end connected to the accelerator pedal and the other end connected to the throttle linkage plate. Electronic Throttle Body: The electronic throttle body primarily uses a throttle position sensor and a throttle motor to control the opening angle of the throttle, thereby regulating the amount of air intake. There are four types of electronic throttle bodies: electro-hydraulic, linear solenoid, stepper motor, and DC servo motor.
9
0
Share

What is China's annual automobile production?

China's annual automobile production will reach approximately 6 million units. Below is a brief introduction about automobiles: 1. Basic information: According to the latest national standard "Terms and Definitions of Types of Automobiles and Trailers" (GB/T-3730.1-2001) in China, automobiles are defined as follows: vehicles powered by an engine, with four or more wheels, not running on rails, mainly used for transporting people and/or goods, towing vehicles carrying people and/or goods, and for other special purposes. 2. Invention history: In 1879, German engineer Karl-Benz successfully tested a two-stroke experimental engine for the first time. In October 1883, he founded "Benz & Cie. and Rheinische Gasmotorenfabrik." In 1885, he manufactured the first Benz patent automobile in Mannheim.
9
0
Share

Where is the battery jump-start location for BMW?

BMW's positive terminal is located near the right front suspension strut tower, covered by a red cap. Opening this cap reveals a terminal post. The negative terminal is positioned behind the right front headlight, where there is also a metal post used for jump-starting. Below is relevant information for jump-starting: 1. Choose dedicated jumper cables: When performing a jump-start, it's best to use dedicated automotive jumper cables. Avoid using homemade cables or low-quality jumper cables for random jump-starting. 2. Jump-start sequence: When connecting the cables, it's advisable to follow the correct sequence—connect the positive terminal first, then the negative terminal. Additionally, ensure that the connectors of the positive and negative cables do not come into contact with each other, and the positive cable connector should not touch any metal parts of the vehicle.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.