Are all cars automatic now?

2 Answers
CarterFitz
07/24/25 7:09am
No, there are still manual transmission cars. Here is some introduction about automatic transmission gears: 1. Use of P: When the engine is running, as long as the gear lever is in the driving position, the automatic transmission can move easily. When parking, the gear lever must be shifted into P position, which locks the output shaft through the internal parking brake device of the transmission and tightens the hand brake to prevent movement. 2. Use of R: R position is the reverse gear. It should be noted that automatic transmissions do not have a clutch like manual transmissions, so special attention should be paid to the control of the accelerator pedal when reversing. 3. Use of N (Neutral): N position is equivalent to neutral and can be used when starting or towing. When waiting for a signal or in traffic jams, the gear lever is often kept in D position while the brake is pressed.
Was this review help?
18
4
Share
LaLane
08/11/25 2:54am
I've always found the car market quite fascinating. Nowadays, automatic transmissions are indeed everywhere, especially in big cities where they make driving much easier. I've seen many people directly opt for automatics when buying new cars, eliminating the hassle of gear shifting, which is particularly comfortable in traffic jams. However, manual transmissions haven't completely disappeared. They're still quite common in sports cars or some economy models because manual gearboxes have simpler structures, lower maintenance costs, and can be more reliable when driving in mountainous areas. I personally drove a manual for ten years before switching to an automatic, and I've noticed how much technology has advanced – like CVT or dual-clutch transmissions making automatics smoother and more fuel-efficient. But it's not all automatics worldwide. In Europe and America, automatics dominate, but in places like small European cars or developing countries, manuals remain popular among cost-conscious owners. Overall, car purchases depend on personal needs – commuters might prefer automatics for convenience, while driving enthusiasts may still choose manuals for the fun factor.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

How to Close the Trunk of a Panamera?

Press the button on the remote control, and the vehicle will automatically unlock, then the trunk lid will pop up. It can be opened or closed manually by pressing the trunk switch at the rear of the vehicle. After the vehicle is unlocked or when the remote key is within the limited area, you can directly press the trunk switch upwards to open the trunk lid while unlocking the doors. Press the trunk button on the left side of the driver's compartment, and the trunk will automatically pop up. The emergency locking function is used when the trunk needs to be closed urgently in case of an emergency.
3
3
Share

How to open the trunk if the lock of Passat B5 is broken?

If you often use the key to open the trunk lid, it may be due to a broken linkage rod. You should go to a repair shop to open it. If you have been using the remote control to open the trunk lid, it might be because the lock cylinder is dirty or rusty. Spray some rust remover into the lock cylinder a few times to open it. Before attempting to open, it's best to press the unlock button on the key or check if the key battery is dead.
18
0
Share

How to Remove the Gear Shift Knob of a Passat?

Look at the gear shift knob, then hold the gear shift knob head of the Citroen C4 vehicle and rotate it counterclockwise. Remove the gear shift lever of the Citroen C4 vehicle after taking off the gear shift knob head. Then remove the gear shift dust cover of the Citroen C4 vehicle. Tighten the new gear shift knob head of the Citroen C4 vehicle by turning it clockwise, and adjust the direction of the knob head to complete the process.
6
0
Share

How to align the timing of a Perkins engine?

Rotate the cylinder to the vertically downward position, install the timing chain guide rail, mount the timing chain, and align the notch on the counterweight with the timing mark on the cylinder block. The copper link should align with a protrusion in the front groove of the crankshaft timing sprocket. On the sprocket of the horizontal shaft, the copper link should align with three marks. Assemble the camshaft adjuster.
1
4
Share

How to Order a Palisade?

Request a test drive if conditions permit, and negotiate the vehicle price with the salesperson. After gaining a preliminary understanding of the new car's price and availability, negotiate the specific purchase costs and delivery time with the salesperson. Visit the dealership to inspect the new car at the agreed delivery time specified in the order contract. The dealer will require the customer to confirm and sign the "vehicle inspection checklist" to indicate "customer confirmation of the new car's condition."
9
3
Share

How to Use the Automatic Transmission of Oshan X5?

At this point, the wheels are in a mechanically locked state, which can prevent rolling. Usually, you need to press the safety button on the shift lever. When shifting to the N gear, you must step on the brake. In D gear, the transmission will automatically switch between 1st gear and overdrive gear based on speed and throttle conditions. When going downhill or on a long slope, shifting to this gear can limit the car's gear to automatically stay in the lowest gear only.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.