Are all Buick Excelle models equipped with 3-cylinder engines?

1 Answers
OJosiah
07/30/25 1:48am
All Buick Excelle models are equipped with 3-cylinder engines. The Excelle comes with two engine options: one is a 1.0-liter turbocharged engine, and the other is a 1.3-liter turbocharged engine. The 1.0-liter turbocharged engine has a maximum power output of 92kW and a maximum torque of 170Nm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 6-speed dual-clutch transmission or a 6-speed manual transmission. The 1.3-liter turbocharged engine delivers a maximum power of 120kW and a maximum torque of 230Nm. It also employs multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. This engine is matched with a 6-speed automatic transmission. The Excelle's front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
14
4
Share
More Forum Discussions

Does a new car need an inspection in the second year?

Yes, a new car requires an inspection in the second year. The consequences of overdue vehicle inspection are as follows: 1. No compensation for accidents involving overdue inspection: Insurance policies explicitly state that un-inspected vehicles will be denied claims. If an accident occurs involving a vehicle that has not undergone the required inspection or fails the inspection, or if the vehicle lacks a valid driving license, the insurer will not be liable for compensation. This means the insurance policy only applies to qualified and legal vehicles. In addition to refusing compensation for accidents involving vehicles with overdue inspections, insurance companies will also deny claims for lost vehicles. 2. Vehicles not inspected for three consecutive cycles will be forcibly scrapped: According to Article 4 of the 'Compulsory Scrapping Standards for Motor Vehicles,' vehicles that fail to obtain an inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection period will be forcibly scrapped. Specifically, for private cars, inspections are required every two years for the first six years, annually from the 7th to the 15th year, and every six months after 15 years. If a vehicle fails to obtain an inspection qualification mark for three consecutive inspection cycles, it will be forcibly scrapped.
8
4
Share

Can a tire still be used after being patched 5 times?

A tire that has been patched 5 times can still be used as long as the patches hold air. Below is relevant information about automotive tires: 1. Overview: Automotive tires are one of the most important components of a vehicle. They directly contact the road surface and work together with the vehicle's suspension to absorb shocks during driving, ensuring good ride comfort and smooth operation. They also maintain good traction between the wheels and the road, improve the vehicle's traction, braking, and off-road capability, and bear the vehicle's weight. The critical role tires play in vehicle performance is increasingly recognized. 2. Usage tips: (1) Avoid abrupt starts; whether the vehicle is loaded or unloaded, always start smoothly at low speed to prevent tire drag on the ground and reduce tread wear. (2) On good road surfaces, maintain straight-line driving. Except for meeting other vehicles or avoiding obstacles, avoid swerving or making sharp turns to prevent lateral cutting damage between the tire and rim. (3) When descending long slopes, control your speed appropriately based on the slope's gradient, length, and road conditions. On long, steep, or complex slopes, use gear driving and apply light braking to control downhill speed. This not only avoids emergency braking and reduces tire wear but also enhances driving safety.
17
0
Share

How to Reset the Maintenance Light on a Toyota Highlander?

Toyota Highlander maintenance light reset method: 1. With the engine off, press and hold the short-distance trip meter reset button located below the tachometer. 2. Turn the ignition to the ON position, then release the short-distance trip meter reset button. The display will show the SERVICE indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to complete the reset of the reminder message. Additional information: 1. The Highlander will illuminate the maintenance light as a reminder when service is due. After an oil change, the oil light and maintenance data need to be reset. For some vehicles where manual reset isn't possible, a diagnostic tool may be required for resetting. 2. When the maintenance light comes on in a Toyota Highlander, it's advisable to visit an authorized Toyota service center promptly. Technicians will reset the light after servicing. While DIY maintenance is possible, remember to reset the maintenance light to prevent timing errors. 3. Regular maintenance is crucial. Oil changes are the most common service item. Prolonged oil use leads to degradation, reducing lubrication effectiveness, accelerating engine component wear, and significantly diminishing cooling performance. In severe cases, this can lead to engine seizure.
10
1
Share

What does it mean to drive without following the examiner's instructions?

Driving without following the examiner's instructions means not obeying the examiner's commands. Below are the exam precautions: 1. Before getting into the vehicle: Check if all four doors of the exam vehicle are closed. If any door is not closed, the exam result will be marked as failed. 2. After getting into the vehicle: Observe the vehicle's dashboard to see if the vehicle is turned off or idling. If the tachometer shows zero, start the vehicle, but ensure the gear is in neutral before starting. 3. Adjust the seat and mirrors, and fasten the seatbelt: Test if the handbrake can be released. If not, promptly contact the exam site staff. After completing these preparations, raise your hand to signal. The remote examiner will then send the instruction "Please scan your fingerprint." Use the same finger that was registered in the waiting room for verification. Upon successful verification, a voice prompt will say, "Verifying examinee information, please begin the exam." Only after hearing this instruction should you start driving into the exam items. Driving into the exam items without hearing the "please begin the exam" instruction will be automatically judged as failing to follow the examiner's instructions, resulting in disqualification.
16
2
Share

Why is the validity period of the 6-year exemption from inspection only 2 years?

The reason why the 6-year exemption from inspection has a validity period of only 2 years is due to the unified management of small vehicles. The following is relevant information about the annual inspection: 1. Conditions: Vehicles whose condition does not match the records on the driving license or file, vehicles with damaged, incomplete, or illegible license plates or driving licenses, or those with self-made license plates. 2. Precautions: The exterior of the vehicle must not be modified. The color of the glass sunshade or anti-explosion film should not be too dark (items inside the vehicle should be clearly visible from one meter away; mainly applies to vans and trucks, but not to small cars with 5 seats or fewer). Vans and trucks must have enlarged rear license plate numbers. The number of spring leaf plates must not be increased or decreased. The number of seats in a van must not be increased or decreased, and a fire extinguisher must be present. The compartments of box trucks must not be modified (no side doors, no roof openings, no tailgates). The size of the tires must not be altered, and the tread patterns of tires on the same axle must be consistent. Vehicles with unresolved traffic violations or those impounded by the court cannot undergo the annual inspection.
10
0
Share

How to Deal with Insufficient Power After Turning on the Air Conditioning?

Here are the solutions to insufficient power after turning on the air conditioning: 1. It is normal for a car to experience insufficient power after turning on the air conditioning, and this phenomenon becomes more noticeable as the car ages. Since the car's air conditioning is driven by the engine, the power of the air conditioning compressor comes from the car's engine. Therefore, some power is also consumed during the operation of the air conditioning, making the car feel sluggish and underpowered when accelerating. 2. Car malfunctions can lead to a decline in vehicle power performance. Especially in the hot summer, these faults are often hidden behind the air conditioning and go unnoticed. For example, faults in the thermostat or clutch mostly occur under high-temperature conditions, making them easily misjudged by drivers. In reality, it is not difficult to determine whether the power loss is caused by the air conditioning or other faults. Simply turn off the car's air conditioning when you feel the car struggling. If the power situation improves significantly, then the issue is with the air conditioning. If the car still feels weak even after turning off the air conditioning, a more thorough inspection at a repair shop is necessary. 3. Upgrade the spark plugs: High-performance spark plugs can withstand greater thermal and mechanical loads and can adapt to higher ignition voltages, ensuring sufficient ignition energy. For example, spark plugs with iridium alloy electrodes can endure extremely high temperatures without melting and have strong electrode wear resistance, resulting in a longer lifespan. Strong ignition energy can improve the fuel combustion efficiency of the engine, effectively enhancing engine power output without increasing fuel consumption.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.