Are 92 and E92 gasoline interchangeable?

2 Answers
SanKylie
07/29/25 12:20am
92 and E92 gasoline can be mixed and used interchangeably. E92 gasoline is based on 92-octane gasoline with the addition of some ethanol and additives. Differences in gasoline grades: Gasoline grades are marked according to the octane rating. The higher the gasoline grade, the higher the proportion of isooctane. For example, 93-octane gasoline has a higher proportion of isooctane than 92-octane gasoline. The choice of gasoline grade mainly depends on the engine compression ratio. The higher the compression ratio, the higher the fuel grade should be selected. E92 only contains 10% alcohol. If you usually use 92-octane gasoline, mixing with E92 will only result in a decrease in power and a shorter driving range. If you usually use E92, mixing with 92-octane gasoline may improve power and extend the driving range. Precautions for refueling: Do not change the gasoline grade arbitrarily. If you switch to a lower grade, it may cause premature combustion of gasoline, leading to engine knocking. Incomplete combustion of gasoline will also increase carbon deposits, which can block pipes and nozzles, resulting in reduced vehicle power and increased fuel consumption.
Was this review help?
8
3
Share
Daisy
08/12/25 4:35am
As an average car owner, I'd like to share some thoughts on this issue. Many people seem to confuse these fuel types. 92-octane gasoline is the most common unleaded fuel with an octane rating of 92, suitable for most household car engines. E92 doesn't sound like a standard designation - it might be a typo. If it refers to a high-ethanol fuel similar to E85, that would be completely different. E85 contains 85% ethanol and can only be used in FlexFuel vehicles. Mixing high-ethanol fuel with 92-octane gasoline could corrode the rubber fuel lines and injectors in the fuel system, leading to starting difficulties, engine shaking, or warning lights. I once accidentally used a similar fuel and experienced reduced engine performance along with abnormally high fuel consumption, eventually needing to pay for part replacements. I recommend strictly following your vehicle manual's fuel recommendations to avoid mixing fuels and prevent long-term damage, ensuring both driving safety and proper emissions. Regularly checking fuel labels is a simple habit that can save you from future troubles.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Which Volkswagen models use round headlights?

Volkswagen's Continental, Mulsanne, Flying Spur, and Bentayga all use round headlights. Volkswagen: Volkswagen (German: Volkswagen) is an automobile manufacturing company headquartered in Wolfsburg, Germany, and is the core enterprise of the Volkswagen Group, one of the world's four largest automobile manufacturers. Volkswagen Brand Group: The Volkswagen brand group includes eight brands: Volkswagen Commercial Vehicles, Volkswagen Passenger Cars, SKODA, Bentley, Bugatti, Porsche, SCANIA, and MAN. Logo: Volkswagen, meaning 'the people's car,' has undergone several changes in its logo history. The VW in the logo stands for the first letters of its full name. The logo appears to consist of three 'V's made with the middle and index fingers, symbolizing the company and its products' determination to win—win—win.
3
1
Share

How often should the transmission fluid be changed in a Jeep Compass?

The transmission fluid replacement interval for the Compass is 53,000 KM or 30 months. Here is some relevant information: 1. When changing the transmission fluid, it is necessary to use specialized transmission cleaning equipment. During the operation of the transmission, the old fluid is fully circulated and completely drained before adding new transmission fluid, achieving a fluid replacement rate of over 90% and ensuring effective results. 2. In terms of appearance, the Jeep Compass Night Eagle edition is the latest model in the Jeep family. The new vehicle features laser paint, with black coatings specifically applied to the front grille, fog light frames, roof, wheels, and front and rear logos, which is the most significant difference from the standard version.
7
3
Share

What are the causes of exhaust system failure in GAC Trumpchi GM6?

GAC Trumpchi GM6 exhaust system failure may be caused by damaged oxygen sensors, loose or damaged intake pressure sensor connectors, or malfunctioning three-way catalytic converters. Below are detailed explanations of these causes: Damaged oxygen sensor: The oxygen sensor detects oxygen levels in engine exhaust and provides feedback to the ECU about mixture concentration. It is installed on the exhaust pipe before the three-way catalytic converter. Damage leads to increased exhaust pollution and requires direct replacement. Loose or damaged intake pressure sensor: Check for looseness or damage to the pressure sensor and replace if necessary. Three-way catalytic converter failure: The three-way catalytic converter is the most important external purification device in the vehicle's exhaust system. It can be repaired or replaced as needed.
9
2
Share

Why does the car shake at idle?

The reasons for car shaking at idle are: 1. Excessive carbon deposits. Severe carbon buildup inside the engine cylinders can cause spark plug blockage and valve blockage; 2. Fuel supply system failure. Unstable oil pressure can easily lead to unstable mixture concentration; 3. Aging engine mounts; 4. Issues with the ignition coil or spark plugs failing to fire for some reason. Idle refers to the engine running without any load, only overcoming the frictional resistance of its internal components, without delivering external power. The minimum speed required to maintain stable engine operation is called idle speed, which is one of the five basic operating conditions of an engine. A well-functioning engine typically has an idle speed of 550 to 800 revolutions per minute. The idle speed can be adjusted by altering the throttle opening size, idle fuel supply, etc.
7
0
Share

Why does the thermostat of Geely Vision not open after replacing the coolant?

The reasons why the thermostat of Geely Vision does not open after replacing the coolant are as follows: Internal damage to the thermostat: The thermostat automatically adjusts the amount of water entering the radiator based on the temperature of the coolant, changing the circulation range of the water to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the appropriate temperature range. The thermostat must maintain good technical condition; otherwise, it will seriously affect the normal operation of the engine. Damage to the thermostat opening valve: If the main valve of the thermostat opens too late, it will cause the engine to overheat; if the main valve opens too early, it will prolong the engine warm-up time, resulting in the engine temperature being too low. Air not completely purged: If the air is not completely purged after replacing the coolant in the Geely Vision, it will cause the thermostat not to open.
10
3
Share

What is the reason why the BMW ignition brake cannot be pressed down?

BMW ignition brake cannot be pressed down due to problems with the brake hydraulic system, causing excessive pressure; the newly replaced brake discs have not been adjusted, resulting in the inability to press down. Brake hydraulic system failure: The car's vacuum booster pump leaks or malfunctions. The force applied to the brake pedal is amplified by the brake booster pump. If it fails, the brake loses its assist, making it difficult to press down. Newly replaced brake discs: New brake pads require a break-in period of 200 kilometers to achieve optimal braking performance. Therefore, it is recommended to drive cautiously after replacing new brake pads.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.