Are 9-seater vehicles issued blue or yellow license plates?

1 Answers
StValentina
07/30/25 9:07am
Whether a vehicle is issued a blue or yellow license plate depends not only on the number of seats but also on other factors. Generally, 9-seater vehicles are issued blue license plates. Blue license plate vehicles: Blue license plate vehicles refer to those with blue license plates, typically featuring white characters and borders on a blue background. This type of plate is issued to trucks with a total weight below 4,500 kg (excluding) and passenger vehicles with a seating capacity of 20 or fewer people and a body length under 6 meters (excluding). Yellow license plate vehicles: Yellow license plate vehicles typically refer to large vehicles, such as trucks weighing over 2 tons or buses (including vans with 10 or more seats). Most commercially operated vehicles and motorcycles also have yellow license plates.
Was this review help?
8
3
Share
More Forum Discussions

What causes the Kia K3 trunk to not open and make abnormal noises?

The reasons why the Kia K3 trunk cannot open and makes abnormal noises include the car not being unlocked, the trunk latch being stuck, and the trunk latch being deformed. Detailed explanations of the causes and corresponding solutions are as follows: Vehicle not unlocked: If the vehicle is in an unlocked state, both the doors and the trunk will be locked, making it impossible to open. In this case, simply unlocking the car will allow the trunk to open normally. Trunk latch stuck: If the trunk latch is stuck, the trunk will be difficult to open due to friction. In this situation, applying lubricant to the latch position to ensure smooth operation will resolve the issue. Trunk latch deformed: If the vehicle has been involved in a collision causing the trunk latch to deform, the trunk may also fail to open. In this scenario, the trunk will need to be repaired or replaced. The Kia K3 is equipped with a 1.4T turbocharged engine and a 1.6L naturally aspirated engine, delivering maximum horsepower of 130/128 PS, maximum power of 96/94 kW, and maximum torque of 211/156 Nm. It offers robust power while maintaining good fuel economy.
8
2
Share

Does the Vios have a reverse camera?

The 2022 Vios 1.5L CVT Chuangxing CARE edition does not come equipped with a reverse camera. A reverse camera, also known as a parking assist system, reverse visual system, or onboard monitoring system, serves several functions. Functions of the reverse camera: The reverse camera system provides clear visibility even at night through infrared technology. It features automatic level switching and automatic on/off functionality. The dashboard or interior mirror display clearly shows the rear view captured by the rear-mounted camera. Additionally, two reverse cameras can be installed simultaneously to eliminate blind spots during reversing. Principle of the reverse camera: The automotive reverse camera system uses a wide-angle infrared camera installed at the rear of the vehicle. The onboard display clearly shows obstacles behind the car, even at night with infrared assistance. The TFT true-color display is magnetically shielded to prevent signal interference and flickering. It also includes automatic level switching and automatic on/off features. Applications of the reverse camera: Professional vehicle probes offer enhanced anti-magnetic, shockproof, waterproof, and dustproof performance. The TFT true-color display is magnetically shielded to eliminate signal interference and flickering. It can receive two video signals simultaneously and play VCDs and DVDs without requiring a decoder.
9
4
Share

What happens if you press the clutch and accelerator together?

Pressing the clutch and accelerator together prevents the car from moving forward. To shift gears, you should first press the brake to slow down, then press the clutch to shift. When stopping, you can directly press the clutch and brake. The clutch is part of the car's transmission system, connecting or disconnecting the engine from the gearbox. The functions of the clutch are: 1. Ensuring smooth car starts; 2. Enabling smooth gear shifts. Proper coordination between the clutch and accelerator: 1. Starting: Press the clutch with your left foot and the brake with your right foot, shift into first gear, release the handbrake, slowly lift the clutch with your left foot, and when the car starts to vibrate slightly, move your right foot to the accelerator pedal and gently press it while continuing to release the clutch for a smooth start. Once the car starts moving smoothly, fully release the clutch with your left foot and press the accelerator to prepare for shifting. 2. Upshifting: Release the accelerator pedal, quickly press the clutch pedal with your left foot, shift the gear lever to the appropriate gear, release the clutch pedal while slowly pressing the accelerator with your right foot. 3. Downshifting: First press the brake to slow down, lightly tap the accelerator with your right foot, quickly press the clutch pedal with your left foot, shift the gear lever to the appropriate gear, release the clutch pedal while slowly pressing the accelerator with your right foot.
2
1
Share

What are the reasons for the Wuling Hongguang's lack of acceleration?

The reasons for the Wuling Hongguang's lack of acceleration include vehicle idle vibration, poor fuel quality, spark plug misfire, insufficient engine oil, and other issues. Vehicle idle vibration: A dirty throttle or a faulty throttle can cause idle vibration. The main reason for a dirty throttle is the accumulation of carbon deposits at the junction of the throttle valve plate shaft and the throttle body, leading to imprecise throttle opening and resulting in idle vibration. Poor fuel quality: Poor fuel quality can cause poor atomization at the fuel injector, leading to incomplete combustion of the air-fuel mixture in the cylinder, which also results in idle vibration. It is recommended to use higher-grade gasoline after finishing the current tank and perform a fuel system cleaning. Spark plug misfire: If the spark plug fails to ignite, causing one or more cylinders to stop working, this will also lead to idle vibration. Check the spark plugs; if there are cracks in the ceramic part, also inspect whether the ignition module is functioning properly. Insufficient engine oil: Prolonged insufficient engine oil can lead to reduced power and increased fuel consumption in mild cases, and in severe cases, piston impact on the valves, causing mechanical damage to related components. Additionally, a faulty fuel pump or a clogged fuel filter can also reduce engine power.
16
4
Share

How to Assess Damages for Flood-Damaged Vehicles?

After a vehicle is submerged in water and an insurance claim is filed, the owner should promptly report the incident to the insurance company. Record details such as the vehicle model, registration date, transmission type, and whether it is a used car. With both parties present, the insurance company will conduct an on-site damage assessment or direct the vehicle to a designated repair shop or 4S dealership for assessment. There is often a discrepancy between the insurance company's assessed damages and the actual repair costs. If the owner disputes the assessed amount, they can request a re-assessment.
18
5
Share

How to Start a BMW 3 Series?

Starting procedure for the BMW 3 Series: Press and hold the brake pedal, then press the start button to start the engine. Detailed instructions are as follows: 1. Starting/Stopping the Engine: ① Starting: Press and hold the brake pedal, then press the start button. ② Stopping: Bring the vehicle to a complete stop and press the start/stop button. Note: When starting the engine, the operation of other electrical devices will be temporarily suspended. 2. Turning On/Off the Power: ① Turning On: Press the start button without pressing the brake pedal. ② Turning Off: Press the ignition switch again. 3. Correct Gear Shifting Sequence When Turning Off the Engine: ① Park the vehicle → ② Press and hold the brake pedal → ③ Shift to N (Neutral) → ④ Release the brake pedal → ⑤ Engage the parking brake → ⑥ Turn off the engine → ⑦ Shift to P (Park). (Note: On slopes, steps ④ and ⑤ should be reversed to prevent rolling; alternatively, shifting to P before turning off the engine is also acceptable). The reason for engaging the parking brake before shifting to P is that shifting to P first may cause slight vehicle movement, putting additional stress on the transmission lock mechanism and leading to mechanical impact upon restarting.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.