Are 7-Seater Vans Toll-Free on Highways?

1 Answers
McHadley
07/29/25 1:22pm
Seven-seater vehicles are eligible for toll-free highway access. The toll exemption applies to passenger vehicles with 7 seats or fewer (including 7-seaters) traveling on toll roads, which also includes motorcycles permitted on regular toll roads. Free Period: The exemption starts at 00:00 on the first day of national holidays such as the National Day and Mid-Autumn Festival, and ends at 24:00 on the last day of the holiday (for regular roads, the toll-free status is determined by the time the vehicle passes through the toll booth lane; for highways, it is determined by the time the vehicle exits the toll lane). Factors Influencing the Toll-Free Policy: Affected by macroeconomic conditions, although only passenger vehicles with 7 seats or fewer are exempt from tolls during major holidays, the decline in manufacturing economy has led to a noticeable drop in freight demand in some regions, resulting in a year-on-year decrease in toll revenue during the free period. According to a report by Guojin Securities, this policy is expected to impact the performance of listed companies by approximately 5% to 10%.
Was this review help?
17
2
Share
More Forum Discussions

Is the Corolla from FAW or GAC?

The Corolla is a model under FAW Toyota. Here are the specific details about the Corolla: 1. Toyota has equipped the new Corolla with an FF (front-engine, front-wheel-drive) platform featuring a newly designed suspension. While comprehensively adjusting the body size layout, it achieves top-tier driving performance in its class. 2. The powertrain system adopts a newly developed inline 4-cylinder 1.8L engine (Type 2ZR) with dual VVT-i technology, paired with a 6-speed manual transmission. This combination allows for excellent driving performance, world-class fuel efficiency, and low emission levels to coexist at a high level. 3. In terms of safety, the new Corolla comprehensively considers both active and passive safety by adopting the GOA body, VSC (Vehicle Stability Control System), curtain airbags, and side airbags, achieving world-class safety performance in its class.
2
4
Share

Does motor oil have an expiration date?

Motor engine oil does have an expiration date. Generally speaking, unopened oil can be stored for 4-5 years. If properly resealed and stored under suitable conditions, the shelf life is 1 year. The primary factor affecting oil's shelf life is storage conditions. The greater the temperature fluctuations and humidity in the storage environment, the faster the oil deteriorates. For every 10°C increase in temperature, the oil's lifespan is halved. More details are as follows: 1. Never leave the oil cap off and expose the oil to sunlight. The correct practice is to store oil in a sealed, cool place. Poor sealing allows oil to oxidize upon contact with air, and high temperatures accelerate this oxidation process. 2. The simplest methods to check motor oil's expiration are: observing whether the oil's viscosity has changed, determining if the oil's odor has weakened, and examining if the oil's color has altered. When observing color changes, pay attention to variations in the oil's additives. Additionally, you can use filter paper or electronic instruments to check whether the motor oil has expired.
20
1
Share

What are the effects of secondary ignition?

Secondary ignition can cause certain damage to the starter motor and ignition coil. Here is the relevant content introduction: 1. Reason: Starting the car again when it is already running will cause the starter motor to grind gears, generally causing damage to the starter gear of the starter motor and the flywheel ring gear of the engine. However, this damage is only limited to the flywheel ring gear and the starter pinion, and the starter will experience excessive local wear, but it will not harm important components such as the engine and transmission. 2. External force system: In order to bring the stationary engine into working condition, it is necessary to first rotate the engine crankshaft with an external force to make the pistons start moving up and down, allowing the cylinder to inhale combustible mixture gas, and then sequentially enter the subsequent working cycles. The system that relies on this external force is the starting system.
2
1
Share

How to Solve the Issue of Excessive Resistance in the Driver's Airbag?

Excessive resistance in the driver's side airbag may be due to a loose connector. It is recommended to securely fasten the airbag connector under the driver's seat. More details are as follows: 1. The airbag system mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver's side collision airbag is installed in the steering wheel, while the passenger side collision airbag is usually mounted on the dashboard. 2. Airbag sensors are installed on the left, right, and center of the cabin partition; the central airbag sensor and the airbag system are integrated with the electronic control device. 3. The airbag module primarily includes the airbag, gas generator, and igniter. The electronic control device is used for data collection and processing, diagnosing the reliability of the airbag, ensuring timely ignition signals at preset values, and precise timing to guarantee sufficient driving current for the gas generator.
3
1
Share

How to Adjust Valve Clearance in a Car?

Valve clearance adjustment is performed using the cylinder-by-cylinder method. The specific steps for the cylinder-by-cylinder adjustment method are: 1. Check the valve clearance when the engine is cold; 2. Open the cylinder head cover and inspect in order. When each cylinder's compression stroke ends, check the intake and exhaust valve clearances for each cylinder; 3. Manually rock the rocker arm to check if the valve is stuck. When the piston is at top dead center of the compression stroke, the rocker arm should be loose. Insert a feeler gauge into the valve clearance gap—the clearance value is correct when the gauge can just pass through smoothly; 4. If the clearance does not meet specifications, loosen the lock nut on the rocker arm and adjust the screw with a screwdriver. When the clearance reaches the specified value, tighten the lock nut with the screwdriver; 5. Recheck each valve's clearance to ensure all are properly adjusted.
20
2
Share

How to Replace the Key Battery for C200L?

C200L refers to the Mercedes-Benz C200L. Below are the steps to replace the key battery for the Mercedes-Benz C200L: 1. Use the hidden mechanical key at the tail of the key to pry open the key cover; 2. Remove the old battery; 3. Replace it with a new battery. Here is additional information on key battery replacement: 1. Purchase the original battery for the car key, ensuring the voltage and model are the same; 2. Remove the mechanical key, which usually requires pressing a small button before it can be pulled out; 3. Use a small flat-head screwdriver to pry open the car key. There will be a small gap in the middle of the key, and a gentle twist will open it; 4. Pry out the old battery, install the new one, and then reassemble the car key.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.