Are 245 Tires and 265 Tires the Same Height?

2 Answers
StEmily
07/29/25 1:39am
245 tires and 265 tires are the same height. The functions of tires are as follows: 1. Load-bearing: Support the entire weight of the vehicle and bear the load of the car. 2. Traction: Transmit the torque of traction and braking to ensure good adhesion between the wheels and the road surface, improving the car's power, braking, and passability. 3. Protection: Prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency. Tires are circular elastic rubber products assembled on various vehicles or machinery, mounted on metal rims, and characterized by high wear resistance.
Was this review help?
4
4
Share
Autumn
08/12/25 5:44am
I've been repairing cars for decades, and tire size isn't just about width. The numbers 245 and 265 represent the tire width in millimeters, but the height depends on the aspect ratio percentage. For example, a 245/45 tire has a height of about 110mm, while a 265/45 is around 119mm—quite a difference. If the aspect ratios differ, heights might be similar, like 245/50 at roughly 122mm versus 265/45 at ~119mm—close but not identical. I advise drivers to check the full markings on the tire sidewall for proper matching, as height discrepancies can affect driving balance, cornering stability, and suspension wear. As the old saying goes, randomly altering tire sizes invites trouble—sticking to OEM specs is always the safest bet.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

Do Automatic Headlights Automatically Switch Between High and Low Beams?

Automatic headlights do not automatically switch between high and low beams because they rely solely on sunlight sensors to determine the brightness of the surrounding environment. They cannot analyze real-time changes in the surroundings to select between high and low beams. Automatic headlights are a feature installed by some car manufacturers for the convenience of drivers. They use a light-sensing control system to automatically turn the headlights on or off. How to use automatic headlights: Turn the combination light switch to the AUTO position to activate the automatic headlight function. When the light-sensing control system detects that the external light intensity exceeds a certain value, the headlights will automatically turn off. Conversely, when the system detects that the external light intensity falls below a certain value, the headlights will automatically turn on. Precautions for using high and low beams: Low beams should be used when driving at night on roads with streetlights, when encountering pedestrians on the roadside, on narrow roads, or around curves. High beams should be used when there are no streetlights or when driving on straight, distant roads with poor visibility at night. Always switch to low beams when encountering oncoming traffic at night and switch back to high beams after passing.
16
3
Share

What brand is Varta?

Varta is a German automotive battery brand, known as 'Valta' in Chinese. Here is an introduction about Valta: 1. Established in 1888, the Valta brand officially began production in Shanghai Johnson Controls Battery Co., Ltd. in 2005. 2. Varta Valta, a subsidiary of Clarios (formerly Johnson Controls Power Solutions), has been committed to high-end quality and cutting-edge technology since its inception, providing a variety of top-tier battery products suitable for various vehicle models, making it the preferred choice for many world-renowned automobile manufacturers. 3. Many cars with automatic start-stop functions use Valta's high-performance batteries, and many high-end luxury cars also use Valta's high-performance batteries. 4. In 2018, it launched the first service brand in the automotive battery industry—Valta Power Delivery, dedicated to providing a comprehensive set of high-quality professional battery services for the vast terminal repair shops and car owners in China's automotive aftermarket, including testing, distribution, replacement, and rescue.
18
4
Share

What is the tolerance range for h6?

According to national standards, the tolerance grade for internal holes is represented by uppercase letters, specifically 360H6. The tolerance for an internal hole of 360H6 is φ360H6 (+0.036/0), with an upper deviation of +0.036 and a lower deviation of 0. The maximum limit size is φ360.036, the minimum limit size is φ360, and the tolerance zone is 0.036. Additional information: 1. National standards specify that the tolerance grade for external cylindrical shafts is represented by lowercase letters, while internal holes are represented by uppercase letters. This is used to distinguish between the tolerance grades of shafts and holes; 2. For example: What is the tolerance for Φ200-H7/h6? 200 represents the diameter. H7/h6 represents a clearance fit. The uppercase letter H is the fundamental deviation for the hole, 7 is the tolerance grade IT7, the lower deviation for the hole is 0, where h is the fundamental deviation for the shaft, and the upper deviation for the shaft is 0.
19
5
Share

How to Adjust the Audio System in BMW 3 Series?

For BMW 3 Series F30 and F35 models, volume adjustment can be done on the air conditioning panel or the steering wheel. To adjust treble, bass, and tone, navigate to Settings > Tone, or go to External Devices > Tone Adjustment. Below are some relevant details: 1. The audio system used in BMW 3 Series is from Harman Kardon. Maintenance tips for BMW 3 Series audio system: The main unit is significantly affected by weather, particularly the circuit board and plastic components. The parameters of electronic components on the circuit board vary with temperature changes. Therefore, if the car interior temperature is high, it is advisable not to turn the audio volume too high, as this can affect both sound quality and the lifespan of the audio system. Additionally, the core part consists of metal and plastic components combined with a circuit board. 2. Note that external high-power amplifiers are more sensitive to temperature changes and require substantial heat dissipation. During summer, ensure that external amplifiers are well-ventilated. Summer is also a rainy season with high humidity. The audio system components most affected by humidity are the main unit and discs. Always clean discs thoroughly before inserting them, wiping gently from the center outward. Keep car windows rolled up and doors closed to minimize interior humidity. The speaker component most affected by temperature is the cone, which directly impacts sound quality, especially in the mid-to-low frequency range. During such times, it is recommended to recalibrate the audio system.
4
2
Share

What are the dangers of a damaged lower control arm?

Here are the specific consequences that may result from damage to the lower control arm of a car: 1. Breakage of the lower control arm: The wheel will detach from the car body, rendering the vehicle unable to move. 2. Deformation or bending: The positioning relationship between the wheel and the car body is disrupted, causing all four-wheel alignment parameters to fail, which may lead to the vehicle pulling to one side or even the wheel rubbing against the chassis. 3. Aging or failure of the control arm bushing: This can result in metal collision noises when the lower control arm moves. Below is additional information about the lower control arm of a car: 1. The lower control arm is a mechanical tool that, through different linkage configurations, can automatically adjust the camber angle, toe angle, and provide a certain steering angle to the rear wheels when the suspension contracts. 2. The function of the lower control arm is to support the car body and absorb vibrations during driving.
5
3
Share

What is the ground clearance of a typical sedan?

Generally speaking, the minimum ground clearance of a sedan ranges between 110mm and 130mm. For sedans, a larger ground clearance (exceeding 130mm) provides relatively better off-road performance but poorer high-speed stability; conversely, a smaller ground clearance (below 110mm) offers better high-speed stability but poorer off-road capability. If you frequently drive on mountain roads, it is advisable to choose a vehicle with higher ground clearance. If you mainly drive on urban roads or highways, a vehicle with lower ground clearance is sufficient. Additional Information: 1. The lowest ground clearance of most sedans is only about a dozen centimeters, which refers to the distance between the lowest part of the vehicle and the ground (usually near the suspension close to the tires). Other parts of the vehicle are positioned much higher. Therefore, when driving through rough or uneven terrain, it is important to choose your path carefully. Even when passing through low-lying areas, as long as the area near the tires is not at the lowest point of the depression, the chassis will not scrape. 2. The value of the minimum ground clearance has certain limitations and is related to the vehicle's function and aerodynamics. Arbitrarily increasing or decreasing the minimum ground clearance without considering the vehicle type can affect the car's performance and make the overall appearance look uncoordinated and awkward. The ground clearance of a car is not a fixed value; it depends on the load condition. Therefore, determining the ground clearance also depends on the changes in load, and the maximum load variation should be considered when setting the ground clearance.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.