Already deducted 9 points, what to do if more points are deducted?

How to Use the ABS Anti-lock Braking System?

ABS Anti-lock Braking System Usage: Through sensors installed on the wheels, signals indicating that the wheels are about to lock are sent. The controller then instructs the regulator to reduce the hydraulic pressure in the wheel's brake cylinder, decreasing the braking torque. After a certain period, the original hydraulic pressure is restored. This cycle repeats continuously (up to 5 to 10 times per second), ensuring the wheels remain in a rotating state while maintaining significant braking torque. How ABS Works: During braking, ABS quickly determines the locking state of each wheel based on speed signals from the wheel speed sensors. It closes the normally open input solenoid valve for the wheel that is beginning to lock, keeping the braking force constant. If the wheel continues to lock, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to drop rapidly as it connects directly to the brake fluid reservoir, preventing the wheel from fully locking due to excessive braking force. This keeps the braking state at the optimal point (with a slip rate S of 20%), achieving the best braking effect and ensuring the highest level of driving safety.

20

3

Share

What is the correct way to use a car lift?

Drive the vehicle to the designated lifting position on the frame, then align the lift pads with the vehicle's lifting points. Raise the lift slightly without lifting the wheels off the ground, and double-check if the lift pads are properly positioned and secure. Once confirmed, raise the vehicle to the desired height and wait for the machine to automatically lock or manually lock it to ensure safety. The lift arms should be retracted to their minimum length as much as possible. The lift pads should be placed at the center of the vehicle's recommended lifting points and adjusted to ensure even contact. First, raise the lift arms until the pads fully contact the vehicle, then check if the load is securely balanced. Slowly lift the vehicle off the ground to ensure balanced loading, then raise it to the required working height. Release the lift button and lower the vehicle to the safety lock position before performing any maintenance work. Before lowering the vehicle, raise it slightly to disengage the safety locks, then press the descent button to slowly lower the vehicle until the lift arms are at their lowest position. Move the lift arms away and drive the vehicle out. During the lifting or lowering process, always observe whether the lift platform is synchronized. If any abnormalities are detected, stop the operation immediately, inspect, and resolve the issue before resuming use. When lowering the vehicle, first raise the platform slightly to ensure the safety locks are fully disengaged; otherwise, stop the descent. When the lift is not in use for an extended period or overnight, lower the platform to its lowest position, remove the vehicle, and disconnect the power supply.

4

5

Share

Should I use S gear or D gear for highway driving?

For highway driving, using D gear is sufficient. You can use S gear during aggressive driving or overtaking. Introduction to S gear: Most automatic transmissions have an S gear, where 'S' stands for 'Sport', meaning sports mode. When switched to S gear, the transmission enters sports mode, and the engine's operating mode will also change accordingly. In S gear, the transmission delays shifting, only upshifting when the engine speed reaches the redline zone. Reason for using D gear on highways: During highway cruising, such strong power and rapid power response are not necessary, so using D gear is adequate.

14

5

Share

What is the fuel consumption of the 2.0T Wrangler?

Taking the 2021 Wrangler 2.0T Sahara two-door version as an example. The fuel consumption of this car is 8.9 liters. The introduction of methods to reduce car fuel consumption and influencing factors is as follows: Methods to reduce car fuel consumption: You can add fuel additives to the fuel tank to improve combustion and remove carbon deposits. It is recommended to regularly inspect and maintain the vehicle, clean or replace the three filters, which will reduce fuel consumption. At the same time, the longer the idling time when parked, the greater the fuel consumption, so try to minimize idling parking time; and it is necessary to avoid sudden acceleration, stepping hard on the throttle, and driving the car at lower speeds. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, will all affect the car's fuel consumption.

5

1

Share

How to Buy Car Insurance?

Methods for purchasing car insurance are as follows: Insurance Company: Choose a reputable insurance company. Compulsory traffic insurance is mandatory, and third-party liability, vehicle damage, and no-deductible coverage should be considered. Compulsory Traffic Insurance: Compulsory traffic insurance is mandatory and provides basic coverage for the vehicle. Third-Party Liability Insurance: Third-party liability insurance covers damages to other vehicles. Vehicle Damage Insurance: Vehicle damage insurance compensates for losses to your own vehicle in case of an accident. Related information is as follows: Car Insurance: Car insurance mainly consists of compulsory traffic insurance and commercial insurance. Compulsory traffic insurance is mandatory but has limited coverage. Commercial Insurance: Commercial insurance is optional and mainly includes the following types: vehicle damage insurance, which covers repair costs for your own vehicle due to collisions, compensated by the insurance company. Third-Party Liability Insurance: Third-party liability insurance covers compensation for injuries, deaths, or property damage to others caused by accidents involving both parties, paid by the insurance company; no-deductible special coverage, where the insurance company covers the deductible portion that the insured would otherwise bear according to the policy terms.

16

0

Share

What to Do If There Are Mice in the Car Engine?

Install an electronic rodent repellent in the engine compartment to drive away mice using the ultrasonic waves emitted by the repellent. Place some rodent-proof bags or mothballs in hidden locations within the engine compartment. Ensure your vehicle is clean—avoid leaving food, biscuits, or edible garbage in the cabin, and dispose of such waste promptly. Regularly clean the engine to maintain a tidy environment. Mice prefer dirty environments, so a clean space is less likely to attract them. Check if the air conditioner's external intake and outlet filter screens are damaged or missing. Always adhere to scheduled maintenance, and during servicing, request that the staff thoroughly inspect and test the engine. Look for any wiring damaged by mice and repair it promptly to ensure safe driving.

5

4

Share

Already deducted 9 points, what to do if more points are deducted?

How to Use the ABS Anti-lock Braking System?

What is the correct way to use a car lift?

Should I use S gear or D gear for highway driving?

What is the fuel consumption of the 2.0T Wrangler?

How to Buy Car Insurance?

What to Do If There Are Mice in the Car Engine?

What are the differences between hybrid and electric vehicle license plates?

Should the 2019 Audi A4L use 5W40 or 5W30?

What is the actual range of the AION Y?

What Are the Reasons for a Motorcycle Stalling?