After how many years is a pickup truck mandatorily scrapped?

1 Answers
ChaseAnn
07/30/25 9:09am
Pickup trucks have a mandatory scrapping period of 15 years. Pickups are classified as light-duty trucks, which have a scrapping period of 10 years, but this can be extended for up to five years upon application. During the extension period, the vehicle must undergo two inspections per year. This means a pickup truck can be used for a maximum of 15 years before mandatory scrapping. The longer a vehicle is used, the more it depreciates in value and the more it is subject to emission standard restrictions. The usage periods for various types of motor vehicles are as follows: 1. Vehicle scrapping period: Refers to the safety inspection system based on the number of seats and usage time during the vehicle's service life, generally applicable only to commercial vehicles. 2. Regarding motor vehicle scrapping periods: (1) Non-commercial passenger vehicles with 9 seats or fewer have a scrapping period of 15 years, while those with more than 9 seats have a scrapping period of 10 years and a mandatory scrapping period of 20 years. (2) Tourist buses have a scrapping period of 10 years and a mandatory scrapping period of 20 years. (3) Commercial passenger vehicles have a scrapping period of 10 years and a mandatory scrapping period of 15 years. (4) Light-duty trucks have a scrapping period of 10 years and a mandatory scrapping period of 15 years. (5) Passenger vehicles with 20 seats or more have a scrapping period of 8 years and a mandatory scrapping period of 12 years. (6) Passenger vehicles with 19 seats or fewer and mini trucks have a scrapping period of 8 years.
Was this review help?
14
5
Share
More Forum Discussions

Where to Insert a USB Drive in Audi Q3?

Audi Q3 does not have a USB port. Here is some relevant information about the Audi Q3: 1. Although there is no USB port, you can connect your phone via Bluetooth to play music, or download music to an SD card and insert it into the car's SD card slot to play the music stored on the SD card. 2. If the owner insists on using a USB drive to listen to music, there is a port in the armrest box of the high-end models, and the owner can use the included data cable to connect the USB drive. 3. The Audi Q3 will be tuned for a more dynamic driving performance, with a luxurious and distinctive exterior, and will be equipped with adaptive dampers, similar to those found in the TT.
8
0
Share

What are the functions of different gears?

Introduction to the functions of car gears is as follows: 1. N gear (neutral): Neutral gear, which functions the same as the neutral gear in a manual transmission, used for temporary parking. Another function is that if the engine suddenly stalls while driving and you want to restart the engine while moving, you need to shift into N gear. 2. P gear (parking): Parking gear, used when the engine is turned off for parking or the car is stationary. When the vehicle is stopped, you need to shift into P gear to power off, remove the key, and lock the doors. 3. D gear (drive): Drive gear, used for driving on general road surfaces, also one of the most commonly used gears. It can automatically switch to a comfortable working state based on road conditions and vehicle speed.
5
5
Share

What Causes Weak Engine Cranking but Still Able to Start?

Weak engine cranking during startup can be attributed to the following malfunctions: 1. Battery: Due to long-term undercharging, lack of electrolyte, or overcharging, the battery's storage capacity deteriorates. This results in weak starter motor performance after each engine shutdown and during subsequent startups. 2. Starter Motor: Prolonged usage leads to excessive wear of internal copper sleeves, rotor scraping, or contact point erosion in the engagement switch, causing weak cranking power. 3. Alternator: Issues like worn voltage regulators or carbon brushes cause the alternator to produce either excessive or insufficient power output. Excessive charging can lead to battery overheating or electrolyte depletion over time, damaging the battery and causing weak cranking. Insufficient charging keeps the battery in a chronically undercharged state, resulting in weak starter motor performance during startups.
20
3
Share

Which Brand Does the Crown Belong To?

Crown is a mid-to-large-sized automobile brand under the Toyota Group. Below is relevant information about the Toyota Crown: 1. The domestically produced Crown comes with three engine options: 2.5L, 3.0L, and 4.3L. The first two feature a V6 cylinder 24-valve design, while the 4.3L engine is a V8 configuration, equipped with the Dual-VVT-i dual intelligent variable valve timing system. This significantly enhances the engine's air intake efficiency, fuel economy, and power performance, delivering even stronger horsepower. 2. In terms of active safety, the new Crown incorporates advanced braking technology and excellent driving assistance features, including the TRC traction control system, VSC vehicle stability control system, and VDIM vehicle dynamics integrated management system, ensuring optimal traction under various road conditions. For passive safety, the new Crown adopts the world-class GOA body technology, with a standard configuration of 11 airbags, including side curtain airbags and knee airbags.
11
2
Share

Which is more fuel-efficient, the Geely Vision or the Arrizo 5?

The fuel consumption of the Vision and the Arrizo 5 is very close, and both models are relatively fuel-efficient. The Vision's fuel consumption is generally around 7-8L per 100 kilometers, while the Arrizo 5's fuel consumption is approximately 8-9L. Here is more information about the 2018 Vision: 1. Model: The model is positioned as a compact car. 2. Body dimensions: The length, width, and height are 4599/1747/1482mm, respectively, with a wheelbase of 2615mm. 3. Powertrain: The entire lineup is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or a 4-speed automatic transmission. The maximum power is 80KW, the maximum horsepower is 109PS, and the maximum torque is 140N·m.
7
3
Share

What Causes Abnormal Noise from the Exhaust Pipe at Idle Speed?

The reasons for abnormal noise from the exhaust pipe at idle speed are as follows: 1. Damage to the muffler and exhaust pipe: Symptoms include hearing abnormal noise from the exhaust pipe when pressing the accelerator pedal. The noise may not be very loud, and the car may drive normally, but fuel consumption increases. Sometimes, noise may also come from the front section. 2. Aging of the heat shield: Symptoms include abnormal noise from under the engine during low-speed driving or when accelerating, especially in colder weather. It is recommended to lift the car and check if there is a heat shield between the exhaust pipe and the ground. The noise may be caused by the aging of the heat shield, and replacing it can solve the problem. 3. Damage to the exhaust pipe: Symptoms include abnormal noise when turning or moving forward, often originating from the damaged front wheel drive shaft joint.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.